Can Curt TruTrack 2P be Used with 8k Trailer

Question

Question:

Can this weight distribution system work with a diesel pusher towing an enclosed racecar trailer weighing 8,000 lbs.?

asked by: Tom

0

Expert Reply:

Hey Tom, yes the Curt TruTrack weight distribution system part # C69JR that you referenced would work just fine towing a trailer that weighs 8,000 lbs. As long as the tow vehicle has a 2 inch hitch you'd be good.

expert reply by: Jameson C

0

Answer 1

Yes, the Curt TruTrack 2P Weight Distribution System w/ Sway Control #C69JR will work with your Jayco Eagle travel trailer. From what I saw the GVWR of this rig was a hair above 7,000 lbs, so the 800 lb - 1,000 lb tongue weight range is perfect for…

view full answer...

Answer 2

Generally speaking, it is not advisable to reverse a trailer when using a weight distribution system. The system won't blow up but if you reverse at too sharp an angle then you can damage the head so you have to do so in a pretty straight line or…

view full answer...

Answer 3

I recommend using the Fastway e2 Weight Distribution #FA92-00-0800 for your 2023 Dutchmen Coleman Lantern 17B travel trailer pulled by your 2015 Nissan Pathfinder. This hitch is rated for a tongue weight of 400-800lbs and a maximum trailer weight of…

view full answer...

Answer 4

The Autowbrake Electric Brake Controller #3430001 will work well for your trailer. The Husky Center Line Weight Distribution w/ Sway Control #HT32216 is a great option with the brackets mounted 28-1/2" - 30-1/2" from the center of ball…

view full answer...

Answer 5

Hi there Jaime; thanks for the question and you are right on the money for the Reese weight distribution hitch that will work with your Coleman 17B: - Reese Pro Round Bar Weight Distribution #RE34FR This is rated for tongue weights between 200 lbs…

view full answer...

Answer 6

The key to successfully using a weight distribution system is to match the spring bars fairly closely to the tongue weight of the trailer as it is typically loaded. The 800 lb figure is the maximum weight that those bars are rated for. They will work…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Can Curt TruTrack 2P be Used with 8k Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching