See what our Experts say about this MORryde Trailer Suspension Parts

• What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
  Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 # MR87ZR and AllTrek 4000 # MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will offer. For the CRE3000 the height distance is 3-1/4" and it can have up to 3" of travel, while the AllTrek 4000 has a 4-1/2" height distance, and it can have up to 4" of travel. I personally like the CRE3000 a little better so I recommend going...
  view full answer...
• Recommended Cushioned Equalizer Replacement Options For Factory Equalizer 6" Wide and 4" Tall
  I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers # MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter Equalizer # MR87ZR and don't worry the additional width as the shackle straps will accommodate for the difference. If you chose either the shorter MORryde or Road Armor # LC696740 you may be able to switch to a shorter shackle strap. If you have the longer...
  view full answer...
• How to Tell If MORryde Rubber Equalizers Will Fit Trailer
  I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers # MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that this kit is for up to 8K axles with a 33" wheelbase, and then the eyelets measure 6-1/2" apart on center and 3-1/8" down from the hanger (see attached). If this matches what you have then you can use this kit. If this doesn't match what you...
  view full answer...
  
• How to Pick Out MORryde Equalizer Kit If Wheelbase is 34 inches
  Hey Carl, this is a great question that we have checked with MORryde on in the past. They told me in your situation to have you measure from the center of the front hanger bolt to the rear hanger bolt to pick out the correct SRE4000. If that distance is 59 inches go with the # MR87ZR or if 61 inch # MR27ZR.
  view full answer...
• How to Determine Which MORryde Premium Rubber Suspension Kit Fits 2020 Forest River Wildwood 27RKSS
  To determine which MORryde Premium Rubber Suspension Kit fits your 2020 Forest River Wildwood 27RKSS you will have to measure your wheelbase. To determine your wheelbase, measure the distance between the center of your front wheel to the center of your rear wheel. If you have a 33" wheelbase you can use the # MR87ZR. For upgraded shackle straps I recommend the MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR46ZR which uses 1/2" thick shackles so you can feel confident that...
  view full answer...
  
• Upgrading Leaf Springs, Equalizers, and Wet Bolt Kit for 2018 Jayco 265RLS
  Hey Jeff! I can help you find the right parts to upgrade everything but you're going to need to take some measurements. For the leaf springs, you will need to get the spring eye to spring eye measurement or the flat length as outlined in the article I attached further down on this page. You don't want to go too crazy with a higher capacity or you're going to get a rough ride. 4,000 lb leaf springs like the 25-1/4" Long # e57SR or the 26" Long # e22YR would be a good choice if they match...
  view full answer...
• CRE3000 And Wet Bolt Kit for 2023 Coachmen Catalina
  Hi Greg; I wish there was a way for me to know the correct parts for that 2023 Coachmen Catalina but we don't have a way to look it up. The only company that lists their parts like that is Grand Design. If they can get out to their trailer and measure I can help but without those measurements we don't have a way to confirm fitment. More than likely they either have a 33" wheelbase which would be the CRE3000 # MR87ZR or a 35" wheelbase # MR27ZR. Then for wet bolts and shackle straps they're...
  view full answer...
• Determining The Correct Replacement Equalizers For A Tandem Axle Trailer With 5,200lb Axles
  Hey Mike, To determine if the MORryde Rubber Equalizers for Tandem Axle Trailers # MR87ZR would be a compatible fit you'll first want to measure the bolt hole spacing on your current equalizers. The # MR87ZR has a 6-1/2" center to center spacing for the shackle strap bolt holes and a 3-1/4" height from the hanger bolt hole down to the center of the shackle strap holes. Changing the spacing can alter the way the suspension travels and could potentially cause a bind so we always recommend...
  view full answer...
• 2 inch Lift Kit for Jayco 5th Wheel with MORryde CRE3000 Cushioned Equalizers
  The Lippert tandem axle lift kit part # RR23QX does not work with your MORryde CRE3000 suspension kit # MR87ZR.
  view full answer...
• Will Road Armor Shock Absorbing Equalizer Kit Help With Up and Down Movement Of Trailer
  It sounds like you’re dealing with that classic up and down “porpoising” after bumps, and honestly you’ve already done a lot of the right things on the truck side. Since you’ve added the Roadmaster Active Suspension and upgraded to Bilsteins, the next improvement is most likely going to come from controlling the trailer suspension movement itself rather than adding more support to the truck. For your setup, I would lean toward the MORryde CRE3000 equalizer system over adding SumoSprings...
  view full answer...
  
• Is the MORryde CRE3000 a Significant Upgrade to the Lippert Equaflex System?
  Hey Jerry, thanks for reaching out! I'm not sure if I'd say it will be a significant upgrade, but the MORryde CRE3000 Rubber Equalizers # MR87ZR is definitely the next step up to the Lippert Equaflex when it comes to quality, so I recommend going that route if you're for or needing an upgrade! The MORryde ALLTREK 4000 # MR89DR may work, but you'll have to check out the linked qualifier file to verify if it will work with your trailer suspension. Is your Equaflex worn out, or are you...
  view full answer...
• Why Can't Correct Track Lift Kit be Used with MORryde CRE3000
  Hey Brian, I believe you are asking about the Correct Track lift kit part # RR23QX and why it can't be used with the CRE3000 kit like part # MR87ZR. The clearance issue is the square brackets of the Correct track that would need to attach to the outsides of the CRE3000 but the angled brackets on the silver part of the CRE3000 prevent the square bracket from being able to sit flush with the equalizer. That's why the cushioned equalizers that do work like the part # LC279688 have a totally...
  view full answer...
• Is There MORryde CRE3000 that Could Fit Wheelbase of 31 inches
  The MORryde CRE3000 # MR87ZR could work for your trailer but you need to take one more measurement. On your current equalizer measure the distance between the lower bolt hole centers. If that distance is 6-1/2 inches or pretty close to that this will work great for you. It's very likely this will work for you and your longer shackle straps are the reason for the difference in wheelbase.
  view full answer...
• Replacement For 24 Inch 3,500 lb Leaf Springs & Equalizer Upgrade
  Thanks so much for that info, and to replace your current leaf springs that are 24 inches apart from center eye to center eye, you want springs that are slightly shorter because over time they flatten out. So for replacements I recommend 23-1/8" long springs: - 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long # e59SR Then to replace your equalizer with a MORryde equalizer, you'll want to measure your axle from center to center, which will be your wheelbase, and the correct...
  view full answer...
• Upgraded Equalizer And Shackles For 2025 Alliance Delta 525RL
  Hello Jody, thanks for the picture. Your Dexter 13-122 equalizer is 7-3/4" long and 2-7/8" tall. The replacement equalizer must be identical in size to the original. The best upgraded equalizer to replace this is the Dexter E-Z Flex Suspension Kit # K71-653-00. This equalizer has a rubber core for absorbing shock. It measures 7-3/4" wide and 3" tall so it will be an acceptable replacement. The MORryde CRE3000 # MR87ZR you mentioned is 6-1/2" long and 3-1/4" tall so this would not be a...
  view full answer...
• Will MORryde CRE3000 MR27ZR Fit a 2019 Stryker 3513 Fifth Wheel?
  Hi Jonathan, that’s a great upgrade to look at, especially if you’re trying to smooth things out and take some of the harshness out of the ride. The MORryde CRE3000 part # MR27ZR could absolutely be a good fit for your 2019 Stryker 3513, but the key isn’t the trailer model as much as the measurements of your current suspension. This system replaces your existing equalizer between the axles, so what really matters is your axle spacing and the size of the equalizer you have now. You will...
  view full answer...
• Which Equalizer is Better? The Lippert Center Point Air Ride or the MORryde Rubber Equalizers.
  Hey Virgil. The Lippert Center Point by Trailair Air-Ride Suspension Upgrade item # LC1565391 is the top of the line when it comes to equalizers. They are hands down a better option than MORryde equalizers like item # MR87ZR. The built in air bags can be fine tuned and adjusted to fit your comfort. They do a great job of improving your ride by dampening road shock. Additionally, when you replace your equalizers you'll also want to swap out your wet bolts and shackle straps. Wet bolts...
  view full answer...
• Best Suspension Upgrade For 2015 Keystone Passport UltraLite 238ML
  Hey Charles, I can certainly point you in the right direction. The best way to upgrade your suspension is with an upgraded equalizer and wet bolt/HD shackle kit. I really like the kits from MORryde since their cushioned equalizers and bolt kits tend to make a huge difference in ride quality, and they last a really long time. That said, I do not have a way to look up your travel trailer to know exactly which suspension components will fit, but we can still get you well on your way. The...
  view full answer...
• Recommendation for upgrading equalizer on the Alliance delta Ultralight ML226
  Thanks for reaching out Marco, I can completely understand looking for an budget friendly option that also does what we need it to do lol Highly recommended and well worth the investment would be MORryde Cre3000 Rubber Equalizers for a smoother, more comfortable ride. We want to match your current equalizers, measuring the distance between the lower bolt holes and compare the overall height so you keep your ride height and suspension function the same. I've added the Cre3000 qualification...
  view full answer...
• Looking For Leaf Spring, Wet Bolt Kit And Upgraded Equalizer For 2013 Prime Time Avenger 26bhs
  Hey Bryan, thanks for reaching out. I can definitely help with that! There isn't a way to look up your camper to know exactly what leaf springs, shackles or equalizer you will need though, so I will need you to measure and confirm a few things first. For the leaf springs, I'll need to know the weight capacity of your axle, as well as the overall length of the spring. It's best to jack up one side of the trailer so you can measure the spring when not under a load. For the shackles, just...
  view full answer...
• Upgraded Suspension Kit For Arctic Wolf 5th Wheel Trailer
  Hey Calvin, For a suspension upgrade kit on your Arctic Wolf 5th wheel trailer what you need to do is measure the length of your shackle straps from center to center to get the right length. Based on those lengths you will need either of the following: - MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps # MR46ZR - MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps # MR76ZR If your shackle straps aren't either of these...
  view full answer...
• Will MORryde CRE3000 Cushioned Equalizer Fit Triple E Fifth Wheel Trailer
  Hey Gary, the MORryde CRE3000 part # MR87ZR is close enough to what you have now that it would work great. Now to pick out the correct shackle kit will be based on the length of your current shackles. A really common size is 3-1/8 inch like what the part # MR76ZR comes with but let me know what you have and I'll see if you need something different.
  view full answer...
• Which MORryde Upgraded Shackle Kit for Salem Hemisphere Elite Series 35RE
  Hey Tom, this is a great question but the correct length shackle kit you need will be the part # MR46ZR which is 2-1/4 inch as this is very close to what you have now. Are you planning on going with the 33 inch wheelbase kit # MR87ZR or the 35 inch wheelbase kit part # MR27ZR.
  view full answer...
• Are Bushings And Install Hardware Included With MORryde CRE3000 Equalizers?
  Hi Terry! The MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K # MR87ZR do include the copper/brass bushings, but the wet bolts are sold separately. For that, you would want the Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1 # MR52HR (and the Grade 5 Flange Lock Nut - 1/2"-20 - Qty 1 # MR85DR). Those wet bolts are included in the MORryde shackle kits, however. If you are interested in those, I have the two we carry listed below with...
  view full answer...

Do you have a question about this Trailer Suspension Part?