Product Experts Available Now!
Call 1-800-940-8924
MORryde Rubber Equalizers for Triple Axle Trailers - 35" Wheelbase - 8K
(912 reviews)
Price: $380.07
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
MORryde Rubber Equalizers for Triple Axle Trailers - 35" Wheelbase - 8K
Part Number: MR39ZR
In Stock
$380.07
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (912)
- Q & A (0)
- Photos
- Used (2)
MORryde Trailer Suspension Parts - MR39ZR
Highlights
- Up to 3" Suspension Travel: Cushions road shock for a smoother, more stable ride.
- 8" Center Bolt Spacing: Matches 35" wheelbase triple-axle setups for proper alignment.
- 8,000-lb Axle Capacity: Handles heavy loads without stressing the suspension.
- Rubber Insert Equalizers: Absorb vibration and reduce back-and-forth chucking.
- Low-Maintenance Design: Needs less upkeep than air-bag or grease-filled systems.
- Set of 4 Equalizers: Replaces all stock parts for consistent ride quality across all axles.
Features to know about
Smooth Out Every Mile: Rubber Equalizers Soak Up Road Shock
Rough roads can make every trip feel like a workout for your trailer. These MORryde rubber equalizers replace your stock setup with built-in cushioning that gives up to 3" of suspension travel. The rubber insert absorbs bumps and jolts before they reach the frame, cutting down on harsh road feedback and protecting your gear from constant rattling. You’ll feel the difference right away with steadier towing and less bounce over uneven ground.
Less Stress on the Frame: 8,000-lb Axle Capacity Handles Heavy Loads
When you’re hauling serious weight, your suspension has to do more than just move—it has to protect. Each of these equalizers is built for triple-axle trailers with up to 8,000 lbs per axle, giving your frame the cushion it needs under heavy load. The design helps keep stress from transferring directly into the frame so it stays solid mile after mile.
Built to Fit Right: 8" Center-to-Center Equalizers for 35" Wheelbase
Getting the geometry right makes all the difference. These equalizers are designed for a 35" wheelbase with double-eye leaf springs. They measure 8" center-to-center between outer shackle bolt holes, 4" between the hanger and outer shackle holes, and 3-3/8" tall from shackle to hanger holes. That precise sizing means your suspension cycles evenly and performs the way the factory intended—just smoother.
Ready for the Long Haul: Low-Maintenance Design and 2-Year Warranty
Some suspension systems use air bags or complicated linkages that need frequent attention. These equalizers do the job with a simple rubber insert that requires less maintenance. They come in a set of four and carry a 2-year (or 45,000-mile) warranty, so you can roll on knowing your suspension is built to last.
Specs
Application
- Application: triple-axle trailer with 35" wheelbase and double-eye leaf springs
Weight and Capacity
- Axle capacity: 8,000 lbs
Dimensions
- Distance between outer shackle bolt holes (center on center): 8"
- Distance between hanger bolt hole and outer shackle bolt hole (center on center): 4"
- Height from shackle bolt hole to hanger bolt hole: 3-3/8"
Quantity
- Quantity: 4 equalizers
Warranty
- Warranty: 2-Year warranty (or 45,000 miles)
CRE3-35 MOR Ryde CRE3000 Trailer Suspension Equalizers - Triple 35'' Wheelbase
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Defective
Ratings & Reviews
4.7
912 reviews
by:
JD
06/09/2026
After about 20k miles the ones installed from the factory had worn out. Found worn bushings in all the equalizers. Decided to replace the entire kit. Everything was in the box. The box was damaged but it all arrived safely. They could do a better job of packaging for shipping on this item. Maybe place the box in another box with cushioning. Its so heavy I am sure if moves around during shipping. Something similar to how they package the hardware kit. Installed on a 2022 Momentum 395MS Triple Axle. I will have a better grease schedule on this set.
by:
Kyle
08/16/2026
Install was easy,shipping was fast. Haven't towed the rig yet but it looks geeat
by:
Derek
07/20/2026
Straight forward install. Bushings were preinstalled which was super nice. I was lucky enough to reuse my wet bolts. I did drill the weep hole out a little so greasing would go easier next time.
by:
Miguel
11/24/2025
Product ordered was exactly as described. Arrived earlier than initially forecasted. Just installed, everything fit as it should.
by:
David
10/17/2024
The MORryde Equalizers are original equipment on our 5th wheel and I'm proud to say I wore them out! It took a lot of miles but we gotter done. My plan is to wear these out too, hope so anyway. Exact replacement, no problems with installing them. I did install some angle grease zerks to make everything a little easier lube.
David
10/18/2025
Its been a year and no problems, very happy with Morryde
by:
Brandon
01/16/2025
MORryde Equalizers and shackles came quickly and was super easy to install.
by:
Steve
10/04/2026
Very good customer service
by:
Todd
03/21/2026
They seem great so far. Would help if it was easier to figure out what shackle length goes with these.
by:
Steve
08/10/2026
installed on my 2017 Voltage and fit perfect,
by:
James
07/29/2026
Great people to deal with. Parts fit perfect
by:
Glenn
02/17/2025
Easy items to install,
Heather A.
2/19/2025
Your photos looks great! I know it's silly but I love the color blue of these.
by:
Michael
02/18/2025
We had an emergency situation where we had a broken suspension equalizer and could not move our RV and the Park wanted us out. The sales man was great at getting the parts that we needed overnighted and followed our order through to delivery.
Heather A.
2/20/2025
Phew.. I am glad that got taken care of for you. It is not fun being stranded. It looks like you talked to two Josh's. I will let their team leads know you bragged on them.
by:
Harry
11/01/2021
Very happy at this time. I’m disappointed that it took over 4 months to get them and after opening the box looking at the parts wonder if I needed the bolt kit. Called the 800 number was told could use what I had on the trailer. The tech installing determine that the kit was required luckily found a kit but at twice the cost had I been told I would have ordered them from you.
Sierra K.
11/2/2021
It is possible you could use your existing hardware but we do recommend the item # MR38ZR kit, as it is recommended to upgrade all of your hardware once you upgrade your equalizers too.
Helpful Links
by:
Gary
02/10/2026
Thank you for the fast delivery, much appreciated
by:
Chris
03/07/2025
Exact replacement for my camper. Fast shipping and great service once again.
Brooke M.
3/7/2025
Perfect! Glad it was exactly what you were looking for. Where are you headed to next with the camper?
Brooke M.
3/11/2025
@Chris Can I barter with a homemade cheddar jalapeno sourdough loaf for some of the BBQ? haha Do you do brisket by chance? That would make a great sandwich with the bread!
by:
Eric
01/25/2026
Nice product fast delivery
by:
Matthew
07/13/2024
Very Happy with this upgrade! Trailer rides much softer with less "migration of items" and general disruption. It was done with an upgrade to all leaf Spring Mounting bolts to a "WET BOLT" upgraded Bolts that can be greased with a Zerc Fitting. Much better ride, and even the bad parts of roads and trust me they are out there, have a much smaller impact o the Trailer. HIGHLY recommend this product.
by:
Russell
01/18/2025
Great parts! Great people to work with!
by:
Mickey
11/04/2025
Everything was shipped quick. All the parts fit perfectly
by:
William
12/20/2024
the product itself seems to be ok and works fine. Packaging was extremely poor and damaged upon arrival and the powder coat on the equalizers is heavily damaged.
Brooke M.
12/26/2024
I am looking into this for you, William. I am so sorry they arrived this way.
by:
Scott
02/27/2024
etrailer is always helpful. I have called them several times not only to purchase products but for support and recommendations even on Saturdays! they are always friendly and helpful!
by:
Kenneth
09/08/2025
Easy ordering, fast delivery
by:
James
05/29/2024
After a long trip in my trailer I find far less on the floor than before.Every thing works as advertised.
by:
Brett
10/09/2022
Product was great once received all parts that was to be included but the ordering process, customer service and missing parts needs improvement
by:
Anthony
09/13/2022
What a difference. It was amazing at how much different the trailer felt when pulling versus what was in place previously.
25
912
true
Show More Reviews
See what our Experts say about this MORryde Trailer Suspension Parts
- How to Determine Correct Equalizer Upgrade For Triple Axle Toy HaulerHey Scott, While we don't have a way of knowing which equalizers are on your triple axle Attitude toy hauler, we can help you figure out the right ones to upgrade your suspension. It's pretty simple, as all you have to do is measure your equalizer from center-to-center of the bolt holes horizontally, as well as the height from the middle of the equalizer to the center of the top bolt hole. For example, if you measured your equalizer and it was 7-3/4" long and 2-7/8" tall you could use...
view full answer... - Can I Get MORryde Suspension Upgrade Kit MR86ZR With Two Extra Sets Of Shackle Straps? Hey Marcus, thanks for reaching out. So, the MORryde Suspension Upgrade Kit for Triple Axle Trailers # MR86ZR is meant to be used with the MORryde CRE3000 equalizer kit which only uses 6 sets of shackle straps instead of 8. There isn't a kit that comes with 2 more sets of shackles so that leaves you with two options. You can upgrade your equalizer to the CRE3000, part # MR59ZR (33" wheelbase) part # MR39ZR (35" wheelbase). That way the # MR86ZR will have the correct quantity of shackles. That...
view full answer... - How to Find Correct Replacement Leaf Springs and Shackle Straps for 2007 Cyclone Toy HaulerHey Matt, thanks for reaching out! I'll need to know the length of your leaf springs when they are unloaded in order to help you find the right length. That and if you can let me know the length of your shackles (center eye to center eye) I can let you know what will work for your setup. I've linked our selection of leaf springs and shackle straps for you to filter through, but I'll be looking through this same list when I hear back from you!
view full answer... - Replacement Leaf Springs, Equalizers, and Wet Bolt Kit for a Triple Axle Trailer Hey Jeremy. I have all of the parts you'll need but I am going to need you to take a couple of measurements. There's no database that shows me what parts you have on your toy hauler. To replace your springs, I'll need you to jack up one side of the trailer(or both) and get the bolt hole to bolt measurement off of one of your leaf springs. They tend to stretch out over years of use and this is the only accurate way, other than a part number, to find out what size you need. I'll also need...
view full answer... - Hub/Drum and Upgraded Equalizers for 2018 Jayco Seismic 4212Hey Kris, the hub/drum replacement you'll need is the part # 42866UC3-EZ for your 2018 Jayco Seismic 4212. Then for brake assemblies you would want the part # AKEBRK-7-SA. Then for the MORryde kit you'd want the part # MR39ZR for the equalizers. Then for the shackle kit the part # MR26ZR is what you'd need.
view full answer... - Can Rubber Bushing in MORryde CRE3000 be ReplacedHey David, the rubber is not replacement in the MORryde CRE3000 kits like the part # MR39ZR. I found one example of a person online who had found some cracks in their rubber and MORryde just went ahead and sent them out all new equalizers. It looks like yours is at an angle but that is typically due to a problem with running leaf springs that are too long or the trailer not sitting level but is their an issue that you can see with yours?
view full answer... - Replacement MORryde CRE3000 Equalizer, Wet Bolts, and X-Factor Crossmember for a Triple Axle TrailerHey Lance, welcome back! To replace your equalizers and shackles, I am going to need you to take a couple of measurements because I have no way of knowing what size the ones on your Heartland Cyclone are and we've got two options for both. To the replace your MORryde CRE3000 equalizers, you'll need one of the following options: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers item # MR59ZR. The left and right mounting bolts on the main equalizer will be 6-1/2" apart...
view full answer... - Recommended Equalizer Upgrade for a Triple Axle Trailer Hey Zack I don't have a database that shows me what wheel base your 2016 Genesis Supreme Toy Hauler has but it's pretty easy to find out. You'll just want to measure from the center of one of the wheels to the center of the next wheel. I do have a couple of equalizer sets that will be a solid upgrade though. The first one works with trailer's that have a 33" wheelbase. It is the MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers item # MR59ZR. The second one works...
view full answer... - MORryde Replacement For Lippert Equa-Flex Cushioned Equalizers LC279689Hi Alan! The Equa-Flex Cushioned Equalizers LC279689 was for 35" axle spacing and the MORryde Shock Absorbing Suspension Equalizers # MR59ZR is for 33" axle spacing, so it would not be the one I recommend. The MORryde Rubber Equalizers # MR39ZR is for 35" axle spacing and will match the size of the equalizers from the Equa-Flex you have much better. It is the better choice. I have a comparison of all three included as well. What are you installing this on?
view full answer... - Recommended Upgrades for 2021 Grand Design Solitude Ride QualityHey Woody, You've already done two of the top upgrades on a Solitude by adding the MORryde CRE3000 suspension and the MORryde pin box. If you have the CRE3000 but you haven't upgraded the shackle straps and wet bolts, I'd highly suggest MORryde Suspension Upgrade Kit #MR46ZR. Adding these give a tighter suspension feel, less chucking and wandering, also the greaseable bronze bushings last far longer than the nylon. The best compliment to the CRE300, is the MORryde X-Factor Crossmember...
view full answer... - How to Pick Out MORryde CRE300 Cushioned Equalizers for 2025 Alliance Delta 252RLHey Larry, to pick out the correct MORryde CRE3000 kit we just need to know what the wheelbase of your 2025 Alliance Delta 252RL is. If it's 33 inch you'd want part # MR39ZR, if its 42 inch # MR4AR, or if its 33 inch MR59ZR. If you are unsure what the wheelbase it just measure between the hub cap centers.
view full answer... - How to Determine Correct Equalizer Upgrade For Genesis Triple Axle TrailerHello Zack, We may have an equalizer upgrade for your Genesis trailer, but we also don't know what your wheelbase is or what you need. To determine this what you'll need to do is measure your equalizers from center to center of the bolt holes horizontally, and then the distance from the center of the equalizer up, for the height. The wheelbase isn't really something you want to go on, so I'd ignore that. For example, if your equalizer was 8" horizontal from bolt hole to bolt hole and 3-3/8"...
view full answer... - Correct MORryde Rubber Equalizers For 2006 Forest River Sierra Sport Triple AxleHello David, thanks for reaching out. The wheelbase measurement is not always the best way to determine the correct replacement equalizer. Since you are right between the two sizes, the best way to find the right one will be to measure the current equalizer, then go with whichever one is the closest in size. I have included dimensions for the MORryde triple axle equalizer kits # MR59ZR and # MR39ZR for your reference.
view full answer... - Recommended Suspension Upgrade for a Keystone Carbon 417The Keystone Carbon 417 should have a 35" axle spread which can be confirmed by measuring from the center of each axle. In which case, we have options from both Dexter and MORryde. The MORryde Rubber Equalizers for Triple Axle Trailers part # MR39ZR and Dexter E-Z Flex Suspension Kit part # K71-657-00 are both great choices. I recommend Dexter as it comes with the shackle straps and wet bolts so it's more of a complete kit and the shackle straps are much ticker than normal for increase rigidity.
view full answer...
- Availability of Upgraded Shackles and Equalizers for 2020 Heartland Cyclone 4007 5th WheelFor upgraded shackles on your 2020 Heartland Cyclone 4007 5th wheel I recommend one of our suspension upgrade kits. In order to select the correct kit you will need to know the length of your current shackles. If you have 2-1/4" shackle straps you need the MORryde Suspension Upgrade Kit for Triple Axle Trailers # MR86ZR and for 3-1/8" shackles you need the # MR26ZR. These kits come with heavy-duty shackle straps along with wet bolts and bronze bushings. Regarding the Road Armor # LC696740,...
view full answer...
- Best Equalizer Upgrade, Shocks, Suspension Kit For 8,000 lb Triple Axle Trailer w/ 35" Axle SpacingOkay, we can get you all of that, and let's start with the equalizer upgrade, suspension kit, and shocks for your toy hauler with triple 8,000 lb axles. The best equalizer upgrade for your 35 inch axle spacing, along with the needed suspension kit is the following: - MORryde Rubber Equalizers for Triple Axle Trailers - 35" Wheelbase # MR39ZR - MORryde Suspension Upgrade Kit for Triple Axle Trailers # MR86ZR This will give you the heavy-duty set-up you want while also cushioning your...
view full answer... - Replacement Suspension Systems For a 2019 Heartland Cyclone 4270 Toy Hauler While we do not carry the Lippert Road Armor currently for triple axle setups I do have a couple kits for you to consider to replace the MORryde Rubber Equalizers # MR39ZR you have on your 2019 Heartland Cyclone 4270 Toy Hauler. First is the Lippert Center Point by Trailair Air-Ride Suspension Upgrade # LC1565401. This will replace the rubber equalizers you have with an air cushioned suspension. It will allow you to be able to adjust the air pressure to fine tune your desired ride quality....
view full answer... - Recommended Equalizer Upgrade for 2006 Weekend Warrior LE3305When upgrading your 2006 Weekend Warrior triple axle The MORryde Rubber Equalizers for Triple Axle Trailers - 35" Wheelbase - 8K # MR39ZR will work. This kit will upgrade your trailer's suspension system with rubber equalizers for a smoother, more comfortable ride. The rubber insert offers up to 3 inches of suspension travel for greater shock absorption. I have attached a review video link below.
view full answer... - Replacement Leaf Spring for 2018 Heartland Cyclone 4250Hey Richard, the closest option leaf spring solution to what you need is the part # e78SR which is the right size but it's for 6k axles. With that said the GVWR of your 2018 Heartland cyclone 4250 is 16.7k which three 6k axle leaf spring setups would be adequate for since that's 18k worth of capacity. This spring is 25-1/4 inch from bolt hole to bolt hole.
view full answer... - How to Determine Equalizer Upgrade For Dutchmen Voltage Toy HaulerHi Norman, We can help you out with determining the right equalizer upgrade for your Dutchmen Voltage, though don't have a way of knowing specifically which part you need. It's pretty easy to determine though, as you just have to take a couple measurements. What you want to do is match the dimensions of your current equalizers to replacements (or get very close). For example, if your equalizers measured 8" across from center-to-center of the bolt holes and 3-1/2" vertically (as in the...
view full answer... - Will MORryde Rubber Equalizers Work with 2019 Grand Design 7K Axles and 35 WheelbaseYes, the MORryde Rubber Equalizers for Triple Axle Trailers # MR39ZR will work with your 7K axles that have a 35" wheelbase (distance between the centers of the axles).
view full answer... - Are The CRE3000 Equalizers MR39ZR The Same As The CRE3000 Currently On My 5th Wheel?The CRE3000 equalizers # MR39ZR that you see on our site will be the same as the CRE3000 equalizers that came on your 2016 Keystone Fuzion 422. The CRE3000 are a fairly common stock equalizer, especially on larger triple axle 5th wheels like yours. That said, If the current equalizer is stock from 2016, it may be time to replace them anyway. Generally they will be good for a few years or about 45,000 miles, but over time the rubber inserts can degrade. A new set of equalizers will likely...
view full answer... - Wet Bolt Suspension Upgrade Kit For 2005 Weekend Warrion 5TH Wheel Triple Axle TrailerThe MORryde Suspension Upgrade Kit # MR26ZR is designed to be used with the MORryde Rubber Equalizers for Triple Axle Trailers # MR39ZR. This equalizer kit only requires 6 sets of shackles as it removes one set of the shackles and allows the leaf spring to mount directly to the equalizer. If you are not upgrading your equalizer then 2 of the MORryde Suspension Upgrade Kits # MR76ZR that are designed for tandem axles will give you the 8 sets of shackle straps you are needing for your 2005...
view full answer... - Availability of MORryde CRE3000 Rebuild KitHey Joe! A rebuild kit for the MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers # MR59ZR is not something that is available. The only option is to completely replace the kit with a new one. This kit is designed for a 33" wheelbase so make sure you measure and verify before replacing. If you have a 35" wheelbase you need # MR39ZR instead. What kind of trailer do you have?
view full answer...
Do you have a question about this Trailer Suspension Part?
Used Items Available
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches to the blue paint.
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches to the blue paint.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Noah M
Updated by:
Carrie F
Video Edited:
Dustin K
Video Edited:
John S
Video by:
Chris R
Video by:
Thomas T
Written by:
Mike S
Test Fit:
Jacob H
Test Fit:
Kevin C
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
11/25/2025
Glad we got everything to you quicker than expected, Miguel! Sometimes the stars do align! ^___^ What did you install all this on? Looks like a complete suspension overhaul.