How to Pick Out MORryde Equalizer Kit If Wheelbase is 34 inches

Question

Question:

Which MorRyde CRE3000 should I order for a 2018 Forest River - Arctic Wolf Floorplan: 285DRL4? I tried to follow the wheelbase measuring instructions and it looks like 34” which is not an option.

asked by: Carl J

0

Expert Reply:

Hey Carl, this is a great question that we have checked with MORryde on in the past. They told me in your situation to have you measure from the center of the front hanger bolt to the rear hanger bolt to pick out the correct SRE4000. If that distance is 59 inches go with the # MR87ZR or if 61 inch # MR27ZR.

expert reply by: Jameson C

0

Carl

10/16/2024

If I go with the Lippert Road Armor equalizer instead of the CRE3000 which wet bolt shackle kit should I order to go with it?

Jameson C.

10/16/2024

@Carl I would measure the length of your current shackles and use that info to pick out the correct kit. If you get me that info I'll be able to help you pick it out.

Carl

10/16/2024

@JamesonC Between the center of the two bolts its 2.25”

Jameson C.

10/16/2024

@Carl I would go with the MORryde shackle kit part # MR46ZR which has 2-1/4 inch long heavy duty shackles like you are in need of.

Answer 1

Hey Lester. The 2016 Grand Design Reflection 337RLS uses a Schwintek system. The motor should be located at the top of the vertical column on either side of the slide-out, which is accessible from the outside. You'll need to pull back the rubber…

view full answer...

Answer 2

Hey, Chris. After doing some research and checking with Lippert, It looks like the only replacement part they have for the Venture Actuator and High Speed Slide-Out Motor, part #LC168956 is the motor itself, part #LC295380. In my searching It looks…

view full answer...

Answer 3

Hey Matt! I spoke with my contact at Lippert and they're needing some photos of the motor, including any and all data tags on the motor itself. They aren't able to find anything with the part number 080300994 that you sent me. You can send…

view full answer...

Answer 4

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 5

Hello Frank, thanks for reaching out. At this time we only offer two lift assist struts for the Lippert Solid Steps: - Replacement Lift Assist Strut for Lippert SolidStep Triple RV Steps - Narrow Door Frames #LC67UD (for Lippert SolidStep 3-step RV…

view full answer...

Answer 6

Hey Jeff! I can help you find the right parts to upgrade everything but you're going to need to take some measurements. For the leaf springs, you will need to get the spring eye to spring eye measurement or the flat length as outlined in the…

view full answer...

Answer 7

Hello Jody, thanks for the picture. Your Dexter 13-122 equalizer is 7-3/4" long and 2-7/8" tall. The replacement equalizer must be identical in size to the original. The best upgraded equalizer to replace this is the Dexter E-Z Flex…

view full answer...

Answer 8

Hey Rick. There's no database that shows what parts are on your 2013 Sunnybrook Raven. So in order to recommend the correct CRE3000 and shackle bolt kit, I am going to need you to take some measurements for me. The shackle kit ones pretty simple…

view full answer...

Answer 9

Hey Pepper! We have the motor you need but it is not the #TUS24FR. The #LC168956 you referenced is the Lippert Venture Actuator and High Speed Slide-Out Motor. Since you just need the motor the correct replacement part is the #LC295380. If you have…

view full answer...

Answer 10

The outside diameter of the outer tube of the Lippert Components Venture Actuator and High Speed Slide-Out Motor #LC168956 that you referenced is 2 inches. I confirmed this with Lippert and attached a dimensional picture of this for you to check out…

view full answer...

Answer 11

Yes, the MORryde StepAbove RV Steps with Strut Assist like #MR85RR can use the removable mounting plate. It isn't compatible with the struts but you already plan to remove them so that won't be an issue. Assuming you have a 26-28" wide…

view full answer...

Answer 12

Thanks for all that info and I can tell you exactly what awning slide toppers you need for each of the flange to flange measurements you provided. - 72-1/2 Inches: Solera RV Slide-Out Awning #LCV000163279 (White) or #LCV000165063 (Black) - 78-1/2…

view full answer...