2 inch Lift Kit for Jayco 5th Wheel with MORryde CRE3000 Cushioned Equalizers

Updated 03/12/2024 | Published 06/22/2021

Products Featured in This Question

Correct Track Trailer Alignment and Lift Kit - Tandem Axle

(56)

$501.83

MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K

(865)

$207.89

Question:

I have a Jayco 2018 5th wheel with MORryde CRE3000 suspension. I am towing with a 2021 F250 4X4 Crewcab 6.9 Box with autoslide hitch I got from you. I need to raise my trailer by about 2 inches. I am confused with all the options, need help.

asked by: Fritz D

Expert Reply:

The Lippert tandem axle lift kit part # RR23QX does not work with your MORryde CRE3000 suspension kit # MR87ZR.

expert reply by: Jameson C

Erik

3/11/2024

Hey Jameson the description says this will work the the CRE 3000, however when I click the link and look at the notes it clearly says it WILL NOT work with the CRE3000. Which one is accurate?

Jameson C.

3/11/2024

@Erik Thank you for catching that. At one point it was listed as a fit but we recently realized it does not so this is outdated info. I'll take it down.

Erik

3/11/2024

@JamesonC would you happen to know of something that WILL work with the cre3000?

Jameson C.

3/12/2024

@Erik You could use an over under kit to move the axles below the leaf springs to get a lift. If your axle was 2-3/8 inches in diameter you would want the part # K71-384-00 or if it is 3 inch part # K71-385-00. 2-3/8 inch diameter axles are 3,500 lb and 3 inch is typically 5,200-7k.