Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.7 out of 5 stars (128 Customer Reviews)
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.We ordered six of these for your Keystone Fusion 42 ft 5th Wheel. Only 6 months later and two trips, we just had one of the lug nuts completely snap off. It was NOT overtorqued. Seems the quality of the studs used is questionable. We will apply for a replacement via etrailer.
Customer service and ordering was great, product great but how they're packaged did not survive. Missing 2 of 4 hub grease caps and 2 of 4 bent beyond use. I used the old caps
axeltech brake drums seem to be sufficient. Although different from the OEM. Some of the issues where shipping. UPS damages every box from etrailer. So far anyways.
Dimensions are different but may line ok. Grease cap damaged
Excellent company to work with. As with previous orders, fast, FREE shipping is always appreciated.
Items arrived exactly as described, properly packaged, in unblemished condition.
All parts included for installation, WITH THE EXCEPTION of the cotter pins for the axle nut(s). Those are easily found at the local hardware store, but would have been nice to have new ones with the package of new parts. Definitely recommending your business to family and friends. Thanks again!!
Bought 4 hubs for my trailer and every single box was destroyed and the dust/grease caps were all bent. 4/4 were so bent they were unusable. I had 4 spares I keep in the toolbox luckily or I would’ve been waiting for more parts. Hubs are great but packaging/delivery/dust caps very poor
Nice to have the bearings packed and seal already in. The only thing is the drum looks to not be as heavily built as the Dexter drum that came off my 5th wheel! The new one does not have the cooling fins on the drum like the Dexter does! In time i will see if its as good as the Dexter!
Although not as robust (heavy) as the original Dexter hub and drum it fit perfectly and the manufacturing quality was acceptable.
However, I suggest stronger packaging as the package the drum was delivered in was damaged, and fortunately the drum was not.
They were a perfect fit on my 7000 lb Dexter axle. Liked that they came fully greased and ready to slide right on. Some of the dust covers were bent and unusable but the mix of new and old covers I got the job done. I would recommend them to anyone who has the proper axle fit. Will buy again when I need them again in the future.
Thanks for the excellent service of etrailer. The product got delivered very fast at home. The drum was in perfect shape and easy to install on the fifthweel.
Bought these to save myself time by getting pre packed drums. When they arrived, I found several problems. They come with plastic caps to cover openings. The inside cap came off on all 4 and spread grease on the inside of all the drums. The outside cap came off on 2 allowing the outside bearing to come out and spread grease everywhere inside. The other two outside bearings were not packed.
Not happy with this purchase. Ended up spending an hour cleaning and packing bearings.
Darin
2/13/2023
I appreciate the explanation but I am not referring to the dust caps that are installed. I am talking about the shipping grease plugs they installed to prevent the greased bearings from coming out during shipping
Jenny N.
2/13/2023
My mistake! I read the review as having installed the hubs and then experienced the issues. I will have my Customer Service team reach out as yes, those PLUGS should also not come loose in shipping. I am sorry it was a mess to clean up.
Great parts, included all the hardware for easy installation. My wife had no problems at all putting these on my trailer.
I just did a 1300 mile trip and everything went smoothly with my drums and bearings
This was an absolute perfect fit. Gwen was amazing with her product knowledge and patience with me. I am a DIY'er and had no clue as to what I was looking at! Gwen walked me through step by step on how to make sure we had the correct product! This was an amazing experience! Thank you Gwen!!
Excellent customer service and very knowledgeable associates.This was my second purchase from E trailer and shipped and arrived promptly.
Troy, the service rep that I dealt with on my most recent order from etrailer.com, did a fantastic job helping me identify the exact parts I needed to replace the wheel bearings and brake assemblies on my 40 foot Big Horn 5th Wheel. I believe the prices were very reasonable and the service was faster than I expected. Thanks Troy, and I'll definitely recommend etrailer.com as a super place to get your trailer repair parts and accessories.
Charlie P.
12/27/2017
All the products are working well!
First step was the ordering, Talked to Steve and he was very well versed on what I needed. He gave me his direct line so after I got my bearing #’s and call back it took only minutes to finalize the order. I ordered on Wednesday and received everything on Friday. Wow, Great service. Doubled checked all the items and everything was perfect. Buying the assembly is the way to go. Very quick install. Great experience.
Great part fit perfext and saved time
Thomas G.
10/1/2022
Everything in my order fit perfectly and got me on the road
Great product at half the price as the big brand name. etrailer has been great to deal with now and in the past with a highly knowledgeable staff and as always fast delivery.
Thanks again
Joe B.
2/17/2021
So I have never used it because I bought it so I would have a spare in the event I broke down on the highway. As for the quality it’s as good as the major brand that is twice as expensive. I wouldn’t have a problem buying another one when I need it .
I put these hubs on my trailer with new brake assemblies.
Next working day approximately 15 miles my right rear wheel and tire go spinning off into the woods and I'm leaving a trail of sparks.
All five lugs had snapped off,wheel was gone forever and I had to unload my Bobcat,go put on one of the old hubs and the spare.
So I will
Not be purchasing again.
Fit and work perfectly for a year now. The new drum come with all the parts needed and with the new bearing races installed. By with confidence @ etrailer.com
Joe
6/7/2020
Brakes are working great no issues. ??
Great quality product! Everything installed with ease.
5 star. Parts worked great, no issues and shipping was promptly
Installed 4 of these on my 5th Wheel RV along with Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K
Item # AKEBRK-7-SA. Better than original.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
2/13/2023
I have a few questions for you about the experience with the grease caps. What kind of spindles does your trailer have? This hub assembly comes with two different kinds of grease caps, one for regular spindles and one for EZ lube sprindles. The EZ lube spindles will have grease zerk fittings on the end of them. The grease cap to use with it will be the one with the black rubber center that you can remove to access the grease fitting. The regular spindle would use the solid grease cap that would then contain the grease. The grease caps, of course should not fall off, however it sounded like it was possible that the EZ lube grease cap was used with the regular spindle so I wanted to ask. I look forward to your reply.