Replacement 12" Brakes Assemblies And Hubs For ALKO/Hayes Trailer Axle

Updated 02/27/2023 | Published 02/24/2023

Products Featured in This Question

Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand - 6,000 lbs

(18)

$164.64

Replacement Trailer Hub Bearing - 14125A

(136)

$15.94

Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs

(16)

$134.96

Replacement Trailer Hub Bearing - 25580

(2074)

$21.83

Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased

(1708)

$116.57

Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL

(2370)

$11.94

4" Carbon Fiber Digital Caliper

(26)

$12.46

Question:

HELLO FROM THE BEST I CAN TELL THE NUMBER ON THE BACK OF THE HUB IS KAE 96002-02L. IT IS A 12X2 HUB WITH 4 BOLT PATTERN AND 8 LUG 1\2 X 20. IT HAS A 31\2inch CENTER HOLE FROM THE MEASUREMEN I SEND TO YOU. I THINK THIS IS AN OLD DEXTER AXLE BUT NO INFORMATION ON THE AXLE ITSELF. I LOOKING TO REPLACE ALL 4 COMPLETE. CAN YOU TELL ME WHAT I NEED TO GET THE DONE?

asked by: DONALD W

Expert Reply:

Based on the mounting bolt hole spread you have an older ALKO/Hayes axle. For this we have the Left # 23-105-09 and Right # 23-106-09 brake assemblies. These brake assemblies have both the Dexter 5 bolt and ALKO/Hayes 4 bolt mounting patterns for the brake assemblies.

To verify the correct hub you will need to measure your spindle with a Digital Caliper # PTW80157. You will most likely need the Hub/Drum Assembly # AKHD-865-7-2-EZ-K which has a Grease Seal # GS-2250DL (2.25" ID), Inner Bearing # 25580 (1.75" ID) and Outer Bearing # 14125A (1.25" ID). I have included an image to show the measuring points for your spindle. Please let me know if you find any different measurements on your spindle.