Arrives before Christmas 
Hub is designed for use on trailer idler axles. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.9 out of 5 stars (15 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Loved the pre-greased hub and would have rated it a 5 but the studs were too short for my solitude wheel (almost 3/4 in thick where stud goes thru the rim. I also had the slip on rotor for disc brakes)), only had about 3 turns of thread engagement.
Ordering was a breeze and William S was extremely helpful in returning the hub in exchange for the DeeMaxx Trailer Idler Hub for 7,000-lb Axles - 8 on 6-1/2 - Galvanized which has 2 1/2 in studs. Fit perfect!
Love the disc brakes. Stops so much better.
One concern: the caliper support plates are thicker than the stock drum brakes backing plate. The studs in the axle only reach half way through the nuts. It should come with longer studs to replace the stick studs. It seems to be holding on but I would feel better if the studs were longer.
Fast delivery. Everything I need in one place. Very good prices. Customer service is excellent! Highly recommended for your trailer parts.
Was a pleasure to talk to the salespeople there. Very helpful and will definitely use etrailer again. Thanks!!
I used these hub assembly on a rigid axle for movement of loaded shipping container boxes at my farm they worked and interchanged with my existing axle components as noted by supplied dimensions. Even under extreme weight, continual rough treatment and use in harsh wet muddy conditions they function perfectly after a years use.,
Outstanding staff!
Maddie did a Outstanding Job helping me thru every stage of my order. I have been in HD Truck retail for 48 years and would hire someone like her in a minute.. Good Job Maddie.
!Wow! Great product and extremely fast shipping..
GREAT SERVICE FAST SHIP
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.