Replacement Parts For Lippert 7,000LB Trailer Axle On Kaufman Trailer
Updated 02/28/2022 | Published 02/25/2022
Products Featured in This Question
Question:
Hi I’ve got a Kaufman car trailer that has 7k lb Lippert axles. I’ve put about 30k miles on it this year and I need to service the axles but I’m not sure what exactly I need so I was hoping I could send you the serial numbers off the axle and y’all could tell me what I need. That serial number would be S003313768
asked by: Zachary A
Helpful Expert Reply:
Your Kaufman Trailer with the 7,000lb Lippert axles will use a Bearing Kit # BK3-200 to rebuild the axles. This will be all you need if the brakes and hubs are still in good condition.
If the brakes are worn you can replace them with the Dexter Electric Trailer Brake Kit # 23-180-181 or upgrade them to the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465 so that you will no longer need to adjust the trailer brakes manually.
The Easy Grease Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K will replace your worn or damaged hub. These will come with new bearings, races, lug nuts, grease seal and a grease cap.
Product Page this Question was Asked From
Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Video: Review of EMCO Trailer Leaf Springs - 7 Leaf Double Eye Spring 8000 lbs Trailer Axle - EM28AJ
- Shop: Terran Axle Single-Axle Hanger Kit for Double Eye Springs - 3-1/4" Tall Front
- Search Results: tongue weight scale
- Search Results: trailer leaf springs
- Search Results: bronze bushing trailer leaf springs
- Search Results: bushings
- Shop: Big Truck Big RV Tongue Weight Scale for Trailers - 1,000 lbs
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Shop: Front Hanger for 1-7/8" Wide Slipper Springs - 3-7/8" Tall - 9/16" Bolt Hole
- Q&A: How Tall is the Leaf Stack on the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles EM28AJ?
- Search Results: wheel bearing
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Search Results: wheel bearings
- Video: Sherline Tools - Hitch Tools - 5780 Review
- Video: Sherline Trailer Tongue Weight Scale Review
- Article: Most Popular Wheel Bearings
- Q&A: Is My OEM Brake Controller in My 2020 GMC 2500 HD Diesel Compatible with Electric Over Hydraulic?
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Looking For EOH Disc Brake Conversion kit For 2018 Montana 3820FK
- Q&A: Parts Needed to Add Disc Brakes to 2018 Keystone Montana 3121RL
- Q&A: What Brakes and Bearings do I Need for My PJ Dump Trailer with Tandem 7K Axles?
- Q&A: Replacement Bearings, Races, and Seals for a Dexter Number 297697 7K Axle
- Article: Trailer Wiring Diagrams
- Q&A: Looking For Replacement Slipper Springs For My 7k Dexter Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Double-Eye Trailer Suspension System Review