Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
(280 reviews)
Price: $11.39
In Stock
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
Item # GS-2125DL
Our Price: $11.39
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (280)
- Q & A (0)
- Photos
etrailer Trailer Bearings Races Seals Caps - GS-2125DL
- Seals
- Grease Seals - Double Lip
- etrailer
Trailer Hub Grease Seal
Features:
- Double lip seal
- Double lip seals retain the grease inside the hub and exclude water and road grime better than single lip seals
- Replacement for single lip seal 10-1
| Seal Cross-Reference | ||||
|---|---|---|---|---|
| Dexter # | Transcom # | National # | NOK # | Chicago Rawhide # |
| 010-010-00 | 21333VB | 440972 | AF7172E1 | 21352 |
| Inner Diameter (ID) | Outer Diameter (OD) | Thickness | Use With: |
|---|---|---|---|
| 2.125" | 3.376" | 0.31" | Dexter 5,200 - 7,000 lb |
GS-2125DL Double Lip Grease Seal - Replaces Single 10-1
Replaces DL-2125-03, DL2125-00, DL-2125-53
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL - GS-2125DL
Average Customer Rating: 4.9 out of 5 stars (280 Customer Reviews)
Trailer Hub Grease Sealby: Daniel 03/05/2024
Punched in part number. Came rite up and got them 2 days earlier than they said. Thank you . This is why I enjoy using Etrailer for my camper and race car trailers
by: Paul 10/13/2022
This seal fit my particular axel, and was an easy installation. A caution: There are two different I.d.s required for 7K axles. One is 2.125" I.D. the other is 2.250" ID. I had to measure the axel then place my order, but I'm sure there is a way to determine prior to disassembly when ordering using serial #.
by: David 02/23/2024
Prompt delivery of my order. Exactly the correct part. After repacking the bearings, 5th was pulled, 4000 miles last year.Thanks for your service.
by: Scott07/27/2019
The Seal Fit perfectly in my ’69 Dexter Axle Mobile Home Hub
Scott S.
7/28/2020
The bearings I purchased for my 1969 mobile home axle that I use on my log slitter are working flawlessly.
by: James07/27/2023
Perfect fit. Easy to install, I recommend buying extras just incase in gets tweaked or bent during installation or removal. My seal removal tool bent the seal up too bad to use again.
by: Dave 04/13/2024
Fit and work as expected.
by: Chris07/24/2023
It took 12 days from order date to delivery day. Same thing with trailer lights before. I bitched and they said I should have had it shipped a quicker way. How about sending it faster instead of blaming usps. Never again waiting for the junk.
by: Steven10/28/2023
Proof is in the pudding, but I don't see any reason why these seals should not work well.
by: Nigel 08/31/2023
Perfect fit and rolling with my fifth w heel
by: Bryan 03/29/2024
always great service.
by: Leroy11/21/2023
the install was easy and they are holding up just fine. Not used many times but so far all is good.
by: TimBD07/16/2017
I have nothing but good things to say about the seals, and working with etrailer. George is one of the few folks in this business who reaches out to make sure customers are satisfied. The seals were exactly what I ordered, arrived as promised, and are good quality seals.
I have owned boats for 35 years, and trailer to the river to boat, and have now owned 5 different boat/trailer sets. In that time, I have never found a wheel seal that actually prevents water from getting in. I have every type of bearing buddy, have packed marine grease in against the bearing buddy springs...nothing works. So, being able to get these seals supports my yearly ritual of popping the wheels off every year, cleaning everything up, replacing bearings as needed, and off we go. It is the price of boating, and prevents being the guy along the freeway with the family in the car and smoke rolling out of the wheel.
Thanks, George, for being a connected and caring dealer. You are the last of a dying breed. You have won my business for life.
Tim B.
7/16/2018
Seals are working as expected ... they dont keep the water out, but Ive never met a seal that did :-. The double lip does slow the flow down a bit. Good seals, good price.
by: Bill Harrington02/11/2020
The parts were all the right ones and most were Dexter oem parts. The only problem I had was putting the bolts in the frame end of the spring perch. It was easier to take the spring loose from the axle, put the bolt in ,then bolt it back to the axle. I intend to buy all of my future trailer parts from etrailer.
by: Patrick 02/05/2023
Diana did a great job helping me cross reference the seal number I had. The 4 seals arrived within a day (helps that I live in Missouri). We will see how they hold up in my 5th wheel travel trailer!!
Thanks
by: Roger12/28/2023
Great service!
by: Rick M.03/28/2017
I've got about 12,000 miles on my new Rockwood Windjammer 3029, so it's time to remove, inspect, clean and repack my wheel bearings. This requires new rear seals, so I ordered them thru etrailer. Package came in sooner than expected, and was in good shape. The rear grease seals look identical to the "Dexter" stamped seals that came on the trailer, except for the Dexter name and logo. They installed just as expected, and now I'm ready for the next 12,000 miles.
Rick M.
3/28/2018
after one year, seals are still performing as expected, no problems.
by: Jackie02/09/2023
I have several trips since installation and have had no problems.etrailer sent correct parts in reasonable time. Good service.
by: Perry 04/17/2023
Perfect match love etrailer knowing they have parts for my camper and delivery is fast will continue to order from them.
by: Den 09/17/2023
Product arrived in record time, and it’s just what I needed.
by: Roger A.10/13/2016
I have a boat trailer that requires wheel bearings and seals periodically. It is 20 years old but I easily found replacements at etrailer.com. I bookmarked the parts so I can get them easily next time. Noticed that the original bearings were made in England, the recent ones are made in China and are of equivalent excellent quality. Delivery was prompt, packing very good.
Good retailer.
by: Glen 08/27/2023
Good product
by: William 07/24/2022
Always like ordering from etrailer they seem to always have what I need when needed. Quick delivery with no complaints.
by: Al T.11/12/2019
I used these seals on my triple axle boat trailer that gets submerged 15 times a season. I remove the hubs every fall to remove any water that gets in. The seals with Lucas oil red grease keep all the water out. 1st time in ten years I didn’t have to clean out milky grease and relube.
by: Michael01/25/2018
I had a 5x8 utility trailer that I repacked the wheel bearings on, and needed to replace the grease seals. These worked great, were high quality, and fit perfectly.
by: Paul 08/11/2023
Fast delivery. Easy ordering
25
281
Show More Reviews
See what our Experts say about this etrailer Trailer Bearings Races Seals Caps
- Replacement Grease Seal for CR 21352From what I was able to determine, your CR 21352 grease seal is a Chicago Rawhide 21352 and should be a double lipped seal with a 2.125" ID and 3.376" OD. To replace a seal of that size you'll want to use the # GS-2125DL, which has the same specs as your CR 21352 grease seal and is a direct replacement.
view full answer... - Replacement Grease Seal Recommendation for Seal that has 2.125" ID and 3.376" OD Based on the dimensions you listed the correct replacement grease seal you would need is the part # GS-2525DL that you referenced as it has an inner diameter of 2.125 inches and an outer diameter of 3.376 inches.
view full answer... - Grease Seal Recommendation that has ID of 2.125 and OD of 3.376The seal you would want is the part # GS-2125DL. It has an outer diameter of 3.376 inches and an inner diameter of 2.125 inches.
view full answer... - How to Pick Out Replacement Grease SealTo pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then need to measure the hub bore where the current seal rides. With those two dimensions we can pick out the correct seal that you would need. I attached a link to a page that has all of the grease seals we carry. You will need to select your inner and outer diameter from the filters on the page and the correct seals will be listed....
view full answer... - Can Thinner Trailer Grease Seal be UsedYou can use a thinner grease seal; for your application use the 0.31" thick Grease Seal - Double Lip - 2.125" ID - 3.376" OD # GS-2125DL.
view full answer... - Replacement Grease Seal for a 5013/29772I was not able to reference the grease seal "5013/29772". We may still have a replacement for you but I would need you to measure either the inner diameter (I.D.) and outer diameter (O.D.) of the grease seal or the part of the spindle where the grease seal sits and the inner diameter of the hub where the grease seal is located. These measurements will need to be taken with a digital caliper to the nearest thousandth of an inch. Once you find these measurements, I would be happy to see...
view full answer...
- Grease Seal for Trailer Hub Outer Dimension 3.376 Outer Diameter and 2.125 Inner DiameterWe have the grease seal you are looking for with the part # GS-2125DL.
view full answer... - Replacement For T-23973 Grease Seal on TrailerFrom what I have found, your T-23979 is the same as the Dexter 010-010-00 seal. This has a 2.125" inner diameter and 3.376" outer diameter. The correct replacement would be the Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL # GS-2125DL. I recommend measuring your existing grease seal to verify this information.
view full answer... - Double Lip Seal Recommendation For 5200 LB Dexter Tandem AxlesPart # GS-2125DL seals are double lip seals and have the same dimensions as the single lip seal. The double lipped seals retain the grease inside the hub and help keep water and dirt out better than the single lip seals.
view full answer... - Replacement for Trailer Grease Seal SKF 21352The Trailer Grease Seal SKF 21352 has an I.D. of 2.125" and an O.D. of 3.371". The closest match we have is the Trailer Grease Seal part # GS-2125DL which has an I.D. of 2.125" and an O.D. of 3.376". Since these are grease seals, the .005" difference should not be an issue.
view full answer... - Troubleshooting Trailer Brakes Not Locking Up With a 2016 GMC Sierra 2500 Factory Brake ControllerThe integrated brake controller on your 2016 GMC Sierra 2500 does not offer any kind of electrical booster that you can add to the controller. First you may need to isolate that the problem is either with the Sierra or the trailer. The easiest way to do this is by pulling the emergency break away cable and seeing if it causes your brakes to lock up properly. If the brakes still do not lock up your 5th wheel may need to have the magnets inspected or replaced(see article below). If the...
view full answer... - Trailer Hub Seal that Matches UFP Seal with Listed Dimensions 2.125 x 3.371 x 0.500Yes, the grease seal part # GS-2125DL that you referenced is the correct seal you'd need for your 5,200 lb UFP Dexter axle. This matches the dimensions you listed.
view full answer... - Grease Seal Recommendation for Replacing TMC21333VBWe have just what you need. The correct replacement grease seal you need is the part # GS-2125DL which is the proper replacement for your TMC21333VB.
view full answer...
- How Far Should Grease Seal GS-2125DL Be Pushed In When InstallingThe Grease Seal part # GS-2125DL will need to be driven in until the face of the seal is flush with the inside face of the hub. There may or may not be a bit of space left over but you only need to drive in until flush with the outside.
view full answer... - Replacement Hub Seal for Trailer with 5,200 lb AxlesSince your axle has a 5,200 lb capacity the correct replacement seal would be the part # GS-2125DL.
view full answer... - Compatible Replacement for TCM 21334TC SealThe TCM 21334TC Seal best cross references to our Grease Seal part # GS-2125DL which has a 2.125" inner diameter and 3.376" outer diameter. This seal is designed for grease lubrication.
view full answer... - Replacement Grease Seal for Dexter 5,000 lb Trailer AxleFor a 5,000 lb Dexter axle the correct replacement grease seal would be the # GS-2125DL.
view full answer...
- Grease Seals for a Dexter 7,000 lb. AxleWe do have the seals that you need. For your 7,000 lb. Dexter Axle, the grease seal will either be the # GS-2125DL or the # GS-2250DL. The difference is the inner diameter of the seal. The # 10-36 has an inner diameter of 2.250" and the # GS-2125DL has an inner diameter of 2.125". To verify which seal you need, you can either look for the number on your current seals or measure your spindle where the grease seal rides.
view full answer...
- Picking Out Replacement Hub Seal for Trailer Hub with 6 Lug Bolt PatternSince it's a 6 lug bolt pattern you most likely need the seal part # GS-2125DL but you'll need to verify this by pulling off a hub and measuring the diameter of the spindle where the seal rides. If it's 2.125 this is the seal or if it's 2.25 you'd need # GS-2250DL. If for some reason it's not one of those two diameters let me know and I'll see what we have that would fit. I'll also need the bore diameter on the hub where the seal installs as well in this case.
view full answer... - 2017 GD Reflection 303 Grease SealLippert 5,200 lb trailer axles are odd as some of them have a grease seal surface on the spindle that is 2.125 inches and some have the 2.25 inch diameter. So your best option is to pull your hub off and measure the spindle where the seal rides to determine if you need the part # GS-2125DL for 2.125 inch or the # GS-2250DL for 2.25 inch.
view full answer... - What is the Correct Axle Grease Seal for the Dexter 12 X 2 Brake Hub and DrumIt sounds like you have selected the correct grease seal, # GS-2250DL, for your spindle and Dexter hub. The 3.376 outer diameter matches your hub and because the rubber inner part of the seal has to create a tight seal, to keep grease in and road grime out, the slightly smaller diameter is most likely correct. I am sure that if you measured the seal bearing surface, see photo, on your spindle you would get the proper measurement of 2.25 inches. If you are using bearing protectors or your...
view full answer... - How To Find Which Grease Seal is Used On a 2005 Keystone Montana 5th Wheel TrailerThe 2005 Keystone Montana 5th Wheel Trailer could use either the 2.125" part # GS-2125DL or 2.250" part # GS-2250DL grease seal. Unfortunately, we don't have a way to look this up for any one trailer so it's best to take the hubs apart for yourself and simply measure them. There's also the option of reaching out to the axle manufacturer with the model. If all else fails you can just order both seals and return the incorrect one.
view full answer... - How To Choose Correct Grease Seal for Sundowner Trailer with 5,200 lb AxleThe two most common grease seal options for a 5,200 lb axle are part # GS-2125DL and part # GS-2250DL. The two seals have the same O.D. but different I.D. The former is 2.125" and the latter is 2.250". You'll need to measure to determine the correct fit.
view full answer... - Replacement Grease Seal for 7,000 Pound Dexter AxleThe replacement grease seal for your 7,000 lb Dexter axle will either be the # GS-2125DL or # GS-2250DL. The difference is the inner diameter of the seal. The # GS-2250DL has an inner diameter of 2.250" and the # GS-2125DL has an inner diameter of 2.125". If you have the axle tag information Dexter should be able to identify the axle. If it cannot be identified for some reason, the only option would be to remove the seal and look for a part number or measure.
view full answer...
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
Updated by:
Leah B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Matthew E
Updated by:
Manda E
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Paul
10/14/2023
Seals still working per design no leakage.