See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

• Replacement Disc Brake Rotor/Hub For a 1990 Ranger Trail Boat Trailer
  The Dexter 10" Hub-and-Rotor Assembly # K08-435-05 is designed to fit a 3,500LB trailer axle with the Inner Bearing # L68149, Outer Bearing # L44649 and Grease Seal # RG06-050. To confirm if this is what matches the axle on your 1990 Ranger Trail Boat Trailer, you will need to inspect your current hub for the bearing and seal information. If you are unable to find the information stamped on the bearings and seals you can measure your spindle with a Digital Caliper # PTW80157. Once you have...
  view full answer...
  
• Replacement Brake Assembly and Grease Seal for AL-KO T44 Axle
  For your AL-KO T44 axles, the brake assemblies you need are the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4.4K # K23-478-479 or the manual adjust # K23-462-463-00 along with spoon adjuster # W80630. The grease seal you want is AL-KO part 568861 which is the Grease Seal - Double Lip - ID 1.719" / OD 2.565" # RG06-050 for a set of 2 seals.
  view full answer...
  
• Replacement Bearings and Seals for Lippert 4,400 Lb Axle
  The Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part # BK2-100 or just the Grease Seal part # RG06-050.
  view full answer...
• Timbren Axle-Less Suspension System Compatibility with Aluminum I-Beam Trailer Frame
  The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02 is compatible with I-beam frames and in tandem axle configuration. Due to the Aluminum frame, I recommend putting a thin rubber pad between the steel mount and the aluminum I-beam. The powder coat on the steel should keep the two dissimilar metals from galvanic corrosion, but a thin rubber pad would drastically increase this safety. Zinc plated hardware will work well with...
  view full answer...
  
• Wheel Bearings and Grease Seal for 2023 Keystone Cougar 23MLE
  Well, Dexter is normally really helpful but in this case not so much. From what they sent back you have a # L68149 inner and outer bearing. I've never heard of that before and really don't believe you have a straight spindle. Based on the fact that you also have a 10-19 grease seal # RG06-050 I feel like the outer bearing is actually # L44649. This would mean you can use the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle # BK2-100. I hate to say it but...
  view full answer...
• Availability of Bearing Kit for Dexter 4,400 lb Trailer Axle
  We do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: Bearings # L68149 and # LM67048 Races # L68111 and # LM67010 Grease Seals # RG06-050
  view full answer...
• Replacement Brake Assemblies and Grease Seal for 3,500 lb Trailer Axle
  Hey Phillip, since we know you have 3,500 lb axles we can help but it's not based on the VIN. Since we don't know what brake assembly brand you have on your trailer but we do know capacity the correct replacement assemblies are the part # AKEBRK-35-SA. It's oftentimes more cost effective to just replace the assemblies instead of the individual components plus it's a lot harder to find the parts. Then for a grease seal you'd want the part # RG06-050.
  view full answer...
• Replacement for Bearing LM48548 and Grease Seal 10-4
  Grease Seal # RG06-050 has an inner diameter of 1.719" and outer diameter of 2.565", you mentioned you have grease seal 10-4 and it has a width of .5" but from my research it looks like a 10-4 seal has an inner diameter of 1.249" and outer diameter of 1.983". I strongly recommend using a digital caliper such as # PTW80157 to measure the seal, as well as your spindle where the seal rides in order to get the correct replacement. If it does have an inner diameter of 1.249" and outer diameter...
  view full answer...
• Bearing Recommendation for Trailer with LM48548 and L68149
  We have the bearings you are looking for. You would want part # LM48548 and # L44649. These are not identical though. Then for a grease seal set you'd want the part # RG06-050.
  view full answer...
  
• Double-Lip Grease Seal to Replace Hayes Seal 09103305 or Al-Ko Seal 568861
  Tru-Ryde double-lip grease seal kit # RG06-050 will work as a replacement for Hayes seal 09103305 or Al-Ko seal 568861 since these parts all share the same inner diameter of 1.719-inches and the same outer diameter of 2.565-inches. Part # RG06-050 is a set of 2 seals.
  view full answer...
• Replacement Grease Seals For TRP GS-1719DL
  From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you need are part # RG06-050. There are 2 seals in the package. When replacing any components for your hub, you will want to make sure you either get the numbers for the parts or take precise measurements with a digital caliper. I have attached...
  view full answer...
  
• Solution for Ranger Trail Trailer Hub Issue
  Thanks for reaching out, Troy! According to my research it looks like the Ranger Trail trailers have a tendency to fail at the oil seal - which means either the seal is bad or the spindle is damaged where the seal rides. If you start to see oil drops under your hubs it definitely means you have an issue and you need to take action. It looks like Ranger has done a decent job and helping to correct this issue when it comes up, but if you'd like to swap over to a grease setup instead of...
  view full answer...
• Replacement U-Bolt and Grease Seal for Dexter 3,500 lb Trailer Axle
  If you can get me the axle capacity or even just the diameter of it I would be able to tell you what seal and u-bolts you'd need.
  view full answer...
• Replacement Bearing Kit For a 1999 Dutchmen Model 801D Pop Up Camping Trailer
  I do believe that the Bearing Kit # BK2-100 is the correct kit for your 1999 Dutchmen 801D Pop up camper. You will want to verify that this is the correct kit by comparing to your current bearings or spindle. Inner Bearing # L68149 (1.378"ID) Outer Bearing # L44649 (1.063"ID) Inner Race # L68111 (2.361"OD) Outer Race # L44610 (1.980"OD) Grease Seals # RG06-050 (1.719"ID, 2.565"OD)
  view full answer...
  
• Finding the Most Cost-Effective Solution to Add Brakes to Trailer
  Hydraulic disc brakes will be the most cost-effective solution for you. In order to add those you will need to know your axle's weight capacity. I recommend going with a hub and rotor disc brake kit such as the Kodiak # K2HR35D. To add a hub and roter you will need to take apart your current hubs and find the bearing numbers. The # K2HR35D, for example, use inner bearing # L68149 and outer bearing # L44649 and yours would need to match. The hubs in this brake kit also have a 5 on 4-1/2...
  view full answer...
• Will Disc Brake Kit Work with EZ-Lube Spindle
  Yes, you can use the Disc Brake Kit and Actuator T4843500 on a trailer that has a grease fitting on the end of the spindle (often known as an EZ Lube spindle). You do need to make sure that this kit is compatible with your trailer's axle capacity, brake mounting flange, bearings and grease seal are compatible. The Disc Brake Kit T4843500 is rated for a 3,500 lb axle with a 4-bolt brake mounting flange. It uses inner bearing # L68149, outer bearing # L44649 and grease seals # RG06-050....
  view full answer...
  
• Can 1/4 inch Thick Trailer Hub Grease Seal be Replaced with a 1/2 inch Thick Seal
  Hey Zachary, are you sure you need the seal to be that thin? Normally variances in seal thicknesses doesn't really affect anything and replacing a thinner seal with a thicker one doesn't cause any issues. If that's case our part # 58846 would fit and work great.
  view full answer...
• Replacement Grease Seal For 2015 Keystone Cougar 5th Wheel Trailer with AL-KO Axle
  Hi Bruce, Thanks for reaching out! I’d be happy to help you with that. For your 2015 Keystone Cougar 5th Wheel with AL-KO 4,400 lb axles, the inner wheel seal you’re looking for should be a part part # RG06-050 It has an inner diameter of about 1.719" and an outer diameter of 2.565". This is a really common size for 3,500 lb to 4,400 lb axles, especially on trailers using AL-KO parts. Are you getting your Keystone summer ready? Please let me know if you have anymore questions by commenting...
  view full answer...
• Replacement Grease Seal for Lippert 4400 lb Axle
  The grease seals for the hubs on Lippert's 4,400 lb trailer axles are the same grease seals used on 3,500 lb axles, and you can get either a pair of seals or just one seal, depending on how many you are looking for: 2: Grease Seals # RG06-050 1: Grease Seal # 58846
  view full answer...
• Picking Out Grease Seal for Ultra Tow 783927
  We were able to determine that the correct grease seal you would need is the part # 10-9.
  view full answer...
• Grease Seal Needed for a Dexter 4,400 lb Axle
  The seal for your Dexter 4,400 lb axle is part # 58846 which we also have in a pack of 2 listed as part # RG06-050 these have an inner diameter of 1.719" and an outer diameter of 2.565".
  view full answer...
• Replacement Hub for Tie Down Engineering 11033
  I believe we can narrow this down based on the information you are referencing. However, the best way to be sure is to measure your existing bearings or spindle with a digital caliper like the # PTW80157. It looks like one bearing is stamped with # L44649. The other bearing measurement taken was 1.40" which tells me they probably used a tape measure. The closest thing, and what would make the most sense, is that it was actually 1.378" and a # L68149 bearing. This bearing combination,...
  view full answer...
  
• Help Picking Out Replacement Hub for TDE 11033
  That is most likely a Tie Down hub which while we don't carry that exact brand we most likely have what you need. Since the stud and bearings need replacing it might make more sense just to replace the hub since idler hubs like what you have are pretty inexpensive. Can you get me the bearing numbers or the dimensions of the spindle where the bearings and seal ride?
  view full answer...
  
• Need Bearing Kit For Lippert 3,500 lb Axle On 2021 Forest River Grey Wolf 23DBH
  Hello, and thanks for providing all of that information for your axle. I had my contact at Lippert run the item number and serial number. Your axle is a standard 3,500 lb axle and it used the standard bearing and seal sizing. Our bearing kit # BK2-100 is exactly what you will need to repack everything. This comes with both bearings, races, seal, tang washer and cotter pin. Use one kit per hub. I have included all of the bearing info for your trailer below. Let me know if you need anything...
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?