Need Bearing Kit For Lippert 3,500 lb Axle On 2021 Forest River Grey Wolf 23DBH
Updated 08/07/2025 | Published 10/08/2024
Products Featured in This Question
Question:
Good evening. I have a 2021 Forest River Grey Wolf 23DBH. I was wanting to repack the axle bearings. Looking at your website there are many different seals available and I don’t know the difference between them all. Can you let me know what seal would be the correct seal I would need and I would also like to buy a pair of bearings to have a spare set should I ever need them. The info on the axle is as follows …. Manufacture is Lippert, item V000155966, serialSS006597483, cust part121032. 3500lbs capacity. Thank you.
asked by: Gume O
Expert Reply:
Hello, and thanks for providing all of that information for your axle. I had my contact at Lippert run the item number and serial number. Your axle is a standard 3,500 lb axle and it used the standard bearing and seal sizing. Our bearing kit # BK2-100 is exactly what you will need to repack everything. This comes with both bearings, races, seal, tang washer and cotter pin. Use one kit per hub.
I have included all of the bearing info for your trailer below. Let me know if you need anything else.
Inner race - # L68111
Inner bearing - # L68149
Outer race - # L44610
Outer bearing - # L44649
Transcom part number for grease seal 171255TB ( 1.719" ID 2.565 OD) # RG06-050
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: v000155966
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: trailer hubs and drums
- Search Results: bearing packer
- Search Results: seal puller
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K
- Search Results: trailer brakes
- Search Results: shackle kits
- Search Results: spring shackle kit single axle
- Q&A: Replacing a Lippert 3,500 lb Leaf Spring Axle with a Dexter 3,500 lb Leaf Spring Axle
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: Mounting Hardware for 10" Brake Assemblies
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Video: Review of the Suspension Kit for Tandem-Axle Trailers
- Q&A: What Would Cause Wheel Studs to Break on a Trailer Hub
- Video: Removing and Replacing Trailer Brake Shoes Review
- Q&A: Replacement Hub for a Lippert LCI 126003 Hub
- Q&A: How to Find Correct Replacement Wheel Studs for Forest River Wildcat 5th Wheel
- Shop: RV Mattress
- Q&A: Lug Nut Torque Setting for 14-Inch Steel Trailer Wheels on 1/2-Inch Wheel Studs
- Q&A: What Is the Torque Specification for an 8 Inch Diameter Trailer Wheel
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: All You Need to Know About the Replacement Controlled Motion Hinge for RV Entry Door
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Video: Comprehensive Review: Bearing Packer
Shane B.
8/6/2025
I have this same axel. I'm looking for the parts below based on Lippert part numbers. Bearing Kit = #2023133980 Right Brake = #298274 Left Brake = #297956 Drum/Hub Assembly = #2021013264 Can you point me to what I would need for those? My understanding is I don't need the bearing kit as it comes with the drum/hub assembly through Lippert.