Will Disc Brake Kit Work with EZ-Lube Spindle
Published 01/29/2019 >
Products Featured in This Question
Question:
Do you have the kit without the swing tongue? I also need bearing on front axle. My old actuator is an A60. Do you have an A60 that comes with a drum to disc conversion kit? I need one that fits inside my trailer not the kind that bolts on.
asked by: Mica L
Expert Reply:
Yes, you can use the Disc Brake Kit and Actuator T4843500 on a trailer that has a grease fitting on the end of the spindle (often known as an EZ Lube spindle). You do need to make sure that this kit is compatible with your trailer's axle capacity, brake mounting flange, bearings and grease seal are compatible.
The Disc Brake Kit T4843500 is rated for a 3,500 lb axle with a 4-bolt brake mounting flange. It uses inner bearing # L68149, outer bearing # L44649 and grease seals # RG06-050. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper such as # 301-17068 and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo I've attached to see exactly where you need to measure.
Should your current hub have the same bearings (or measurements) as the Disc Brake Kit T4843500 you would be able to use it.
I have added a link to a video review of this kit for you to check out as well.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake line
- Search Results: boat trailer brake lines
- Q&A: Recommended Replacement Trailer Brakes, Brake Drums and Hydraulic Coupler for Boat Trailer
- Q&A: Brake Lines and Fittings For Single Axle Boat Trailer.
- Q&A: Replacement Surge Brake Parts for 2004 5 Starr Boat Trailer
- Q&A: Brake Lines for Hydraulic Brakes on a Slide Axle Trailer
- Q&A: Difference Between Dexter DX7.5L A-60 Brake Actuators For Disc Brakes
- Video: Titan Hydraulic Brake Lines and Fittings Installation
- Shop: Dexter Hydraulic Brake Line with Fittings - 18-25/32" Long
- Shop: Clip for Dexter Flexible Brake Line Tubing
- Shop: Dexter Surge Brake Actuator - Disc - Elec Lockout - 2" Ball - Zinc - 7.5K - 3" x 5"
- Shop: Dexter Bracket for Flexible Brake Line Tubing
- Shop: Dexter Hydraulic Brake Lines and Fittings for Tandem-Axle, Torsion-Axle Trailers
- Shop: Dexter Hydraulic Brake Lines and Fittings for Single-Axle, Torsion-Axle Trailers
- Shop: Demco Hydraulic Brake Line Kit for Single Torsion Axle Trailers - Drum or Disc Brakes
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Search Results: trailer brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern






Mica L.
1/29/2019
Do you have the kit without the swing tongue? I also need bearing on front axle. My old actuator is an A60. Do you have an A60 that comes with a drum to disc conversion kit? I need one that fits inside my trailer not the kind that bolts on.