Solution for Ranger Trail Trailer Hub Issue
Updated 03/08/2024 | Published 03/07/2024
Products Featured in This Question
Question:
I am looking for solutions to the notorious problems with Ranger Trail trailers and hub problems. I have a 2009 Ranger Trail trailer with disk brakes on both axles. I havent had any issues yet, but I also dont want to have any issues and get stranded on the side of the road. What are my options?
asked by: Troy M
Expert Reply:
Thanks for reaching out, Troy!
According to my research it looks like the Ranger Trail trailers have a tendency to fail at the oil seal - which means either the seal is bad or the spindle is damaged where the seal rides. If you start to see oil drops under your hubs it definitely means you have an issue and you need to take action.
It looks like Ranger has done a decent job and helping to correct this issue when it comes up, but if you'd like to swap over to a grease setup instead of an oil bath then we have the means to help you do so.
You likely have two 3,500 lb axles so if you clean out the oil completely then you can add some Marine Grease # L74FR and either replace all of the bearings and seals with the Kit # BK2-100 or just replace the seals with the Kit # RG06-050. If you let me know what the bore size is on your hub I can recommend a replacement grease cap for you as well. Also, if you have a different trailer axle weight rating please let me know so I can give you the correct parts.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Search Results: marine grease
- Search Results: gs~1719dl
- Search Results: gs 1719dl
- Q&A: Determining Replacement Bearings for 2009 Ranger Trail Trailer
- Shop: CE Smith Tapered Spindle Axle - Weld On - 1-3/8" to 1-1/16"
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Video: Review of Dexter Brake Actuator - Surge Brake Actuator - DX79UR
- Shop: Dexter Boat Trailer Axle - 92" Long - Galvanized
- Shop: B&W Tow & Stow Pintle Hook with 2" and 2-5/16" Balls - 2" Hitch - 10K/16K
- Q&A: Hub Assembly Recommendation for Ranger Trail Boat Trailer
- Q&A: Do Trailer Brake Lines Need to Run On the Inside or Outside of a Trailer Frame
- Q&A: Replacement For GS-1719DL TRP Grease Seal For Trailer Hub
- Q&A: How to Identify Correct Replacement Grease Seals and How to Install Them
- Q&A: How to Confirm Correct Size of Grease Seal
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Video: In-Depth Review of the Trailer Hub and Drum Assembly
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles
- Video: The Low-Down on the Mystik JT-6 High Performace Synthetic Grease
- Video: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles: The Breakdown
- Video: A Closer Look at the Prime Guard Red Hi-Temp Wheel Bearing Grease
- Q&A: Is The Easy Grease Trailer Hub and Drum Assembly Sold Individually Or In Pairs?
- Search Results: a~60
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: wesbar 271595
- Article: Boat Trailer Guides: Which are the Best?
- Article: The Best Boat Bumpers
- Article: Best Boat Trailer Jacks
on Trailer Bearings Races Seals Caps
Troy M.
3/7/2024
Thank you for the information. I will check on what you said and get back with you. I hate worrying about my trailer and if the next trip will be the one that strands me. I have always had grease fittings and never had any issues. It will be a great relief to go back to that setup.