bing tracking image
Don't Miss These Holiday Savings!
VIEW DEALS
Customer Service My Orders
Q & A Icon

Help Picking Out Replacement Hub for TDE 11033  

Published 09/28/2017

Question:

I filled in what I could for the dimension of my boat trailer hub and axle shaft, I hope this is enough info, I can not see any other markings. I have attached as a JPG: Pontoon trailer- Bearings, Race & Grease seal dimensions.JPG 1) I prefer to get the parts: Bearing, Race & Seal 2) I would also be interested in the whole hub if all the other parts are included

0

Expert Reply:

That is most likely a Tie Down hub which while we don't carry that exact brand we most likely have what you need. Since the stud and bearings need replacing it might make more sense just to replace the hub since idler hubs like what you have are pretty inexpensive.

Can you get me the bearing numbers or the dimensions of the spindle where the bearings and seal ride?

expert reply by:
0
Jameson C
click to enlarge
click to enlarge
Greg V. profile picture

Greg V.

9/28/2017

I filled in what I could for the dimension of my boat trailer hub and axle shaft, I hope this is enough info, I can not see any other markings. I have attached as a JPG: Pontoon trailer- Bearings, Race & Grease seal dimensions.JPG 1) I prefer to get the parts: Bearing, Race & Seal 2) I would also be interested in the whole hub if all the other parts are included

Reply
Jameson C. profile picture

Jameson C.

9/28/2017

We do have the # L44649 bearing you mentioned for the inner bearing. I didn't see an outer bearing number mentioned though. We only have one bearing with an inner diameter of .75 and it's the # LM11949. For seals the part # RG06-050 would be what you need as well.
Reply
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>