Replacement for Bearing LM48548 and Grease Seal 10-4
Published 06/28/2018
Products Featured in This Question
Question:
Thanks for the response. I was not able to get a very good measurement of the seal itself as it was pretty beat up. I do know that it is not the dimensions you listed. My spindle is 1.72 where the seal rides and the bore of the hub where seal inserts is 2.54. My gauge is not the greatest so I could be off a couple hundreths. What is the width of the RG06-050? If it is smaller, could it still be used as it appears it would fit the spindle and hub bore.
asked by: Ken P
Expert Reply:
Grease Seal # RG06-050 has an inner diameter of 1.719" and outer diameter of 2.565", you mentioned you have grease seal 10-4 and it has a width of .5" but from my research it looks like a 10-4 seal has an inner diameter of 1.249" and outer diameter of 1.983". I strongly recommend using a digital caliper such as # PTW80157 to measure the seal, as well as your spindle where the seal rides in order to get the correct replacement. If it does have an inner diameter of 1.249" and outer diameter of 1.983" the replacement seal is # 34823.
Although we do not have a kit for your bearings, we do have them individually: Bearing # L44649 and Race # L44610 as well as Bearing # LM48548 and Race # LM48510.
Product Page this Question was Asked From
Replacement EZ Lube Drive-In Grease Cap - 1.986" OD - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.98 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- Dexter
more information >
Continue Researching
- Search Results: k23~465
- Search Results: dexter vault
- Search Results: gnrk1020
- Search Results: rvk3405
- Search Results: mini blind
- Search Results: 8 lug drum
- Search Results: wheel bearing kit
- Shop: Dexter Vault Hybrid Lubrication Kit for 7,000-lb Trailer Buddy Axles
- Q&A: Dexter Hub Replacement for Hub Part # K08-219-9B
- Q&A: Needing a Replacement Electric Coach Double Step for RV LCI Model 168367
- Q&A: Replacing Grease National 6362 Seals On A 1962 Circle J Horse Trailer
- Shop: Optronics LED Mini Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Amber Lens
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Video: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs: The Breakdown
- Video: Suspension Kit for Tandem-Axle Trailers Feature Review
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Shop: Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - Single Path
- Shop: Suspension Enhancement
- Shop: Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
- Article: What Size Generator Do You Need to Run an RV Air Conditioner?
- Q&A: What Does The 113/108M Represent On the Sidewall Of My ST225/75R15 Tire?
- Video: Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter: The Breakdown
- Q&A: Troubleshooting Flashing PL Code on Tekonsha Primus Brake Controller
- Shop: Fifth Wheel Hitch
- Q&A: How to Confirm Correct Size of Grease Seal
- Q&A: Replacement Options For a 6.90-9 Tire on Wheel With 5 on 5-1/2 Bolt Pattern
- Video: Breaking Down the Grease Seal
Ken
6/28/2018
Thanks for the response. I was not able to get a very good measurement of the seal itself as it was pretty beat up. I do know that it is not the dimensions you listed. My spindle is 1.72 where the seal rides and the bore of the hub where seal inserts is 2.54. My gauge is not the greatest so I could be off a couple hundreths. What is the width of the RG06-050? If it is smaller, could it still be used as it appears it would fit the spindle and hub bore.