Replacement Hub for Tie Down Engineering 11033
Products Featured in This Question
Question:
Same issue as the other thread on here about the tie down engineering boat trailer hub. I need to know which hubs are direct replacements and which are the proper bearings. TDE #11033.
asked by: Jose
Expert Reply:
I believe we can narrow this down based on the information you are referencing. However, the best way to be sure is to measure your existing bearings or spindle with a digital caliper like the # PTW80157.
It looks like one bearing is stamped with # L44649. The other bearing measurement taken was 1.40" which tells me they probably used a tape measure. The closest thing, and what would make the most sense, is that it was actually 1.378" and a # L68149 bearing.
This bearing combination, along with the # RG06-050 grease seal, indicate this is a 3,500 lb axle and hub assembly. For a replacement hub you can use the # AKIHUB-545-35-EZ-K. This comes pre-greased and has the same 5 on 4-1/2 bolt pattern.
(click to enlarge)
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: 3500lb Trailer Idler Hubs Direct Comparison
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: RV Bearing
- Shop: Trailer Wiring
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Hitch
- Shop: Gooseneck Hitch
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-EZ-K
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Q&A: Help Picking Out Replacement Hub for TDE 11033
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Brake Controller
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: trailer hubs and drums
- Q&A: Do You Know the Difference Between a 11033 Hub and My 11033L Hub?
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Search Results: ramp door seal
- Q&A: Replacement For 11033L Idler Hub and Spindle Ranger Boat Trailer
- Search Results: castle nut washer
- Q&A: How To Tell If I Have An EZ Lube Axle
- Search Results: boat trailer hub assembly
- Search Results: 84 spindle hub
- Q&A: Replacement Hub For Obsolete Tie Down Engineering 3,500lb Hub 11033L
- Search Results: trailer tires and wheels
- Search Results: trailer jack
on Trailer Bearings Races Seals Caps
Adam
9/23/2024
I ordered the hub recommended in this response that is supposed to replace the TDE 11033... Will I need any other parts for the install?