See what our Experts say about this CURT Accessories and Parts

• Recommended Hitch for a 2023 Lexus RX 350
  The Draw-Tite item # DT73QR installs below the bumper. This hitch is perpetually backordered due to Draw-Tite being bought out so I have a way better option for a hitch for your 2023 Lexus RX 350. I recommend the Curt Trailer Hitch item # C29VV. This hitch is custom fit and bolts to your Lexus with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper leaving only the 2" receiver visible. This not only looks better it also helps with ground clearance....
  view full answer...
  
• Does the Curt Trailer Hitch item # C13382 Fit a 2024 Subaru Crosstrek?
  Yes, it is accurate. The Curt Trailer Hitch item # C13382 is confirmed to fit all models of the 2024 Subaru Crosstrek except for the hybrids. There was a customer that recently installed this on a 2024 with no issues back in May and he sent me in a picture which I have attached below. No modification or customization needed. It went right on his Subaru. If you are planning on towing you will also need a wiring harness item # C56040 and a ball mount kit item # C45534. I recommend using...
  view full answer...
  
• Recommended Hitch and Wiring Harness for a 2022 Toyota Highlander
  Hey Joseph! The Curt item # C45CR requires you to disconnect an exhaust hanger temporarily, but it gets reinstalled a couple steps later. It's just to get the hitch to the mounting bolts behind the muffler. This hitch is custom fit for the 2022 Toyota Highlander and fits all models including your Platinum. For a 4-way wiring harness, you'll want the T-One Vehicle Wiring Harness item # TK99FR. This custom fit harness plugs directly into the existing wiring of your Highlander without requiring...
  view full answer...
• Looking For Brackett For 4-Pin Flat Connector
  Hey Dennis, thanks for reaching out. Yes we do have a braket for attaching the 4-flat plug to the car. For that I recommend the following: - Curt Mounting Bracket for 4-Pole Flat Trailer Connector # C42CR What most people do it use self-tapping screws to attach to the crosstube of the hitch. That or you can use a small bolt and nut to attach it to the bottom of the bumper. I've included a few pictures of examples. What kind of trailer will you be towing?
  view full answer...
• Recommended Hitch for a 2024 Hyundai Santa Cruz
  Yes, we do. To add a hitch to your 2024 Hyundai Santa Cruz, I recommend the Curt Trailer Hitch item # C23WR. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight. I really like this hitch because the crosstube mounts completely behind the rear bumper leaving only the 2" receiver exposed. This not only looks better but it helps with ground clearance. Since you are planning on towing you will also need a wiring harness item...
  view full answer...
• Recommended Hitch and Trailer Wiring for a 2026 Mazda CX-90 Plug-In Hybrid
  It sure does Steve, and congrats on your new SUV. The Curt Hitch item # C74MJ does indeed fit the Plug-In Hybrid model of the 2026 Mazda CX-90. The Curt item # C74MJ is a class III hitch with a 2" receiver that comes with all necessary installation hardware. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like the Curt Hitch item # C74MJ because of how it installs. The entire crosstube is hidden behind your rear bumper leaving only the 2" receiver visible....
  view full answer...
• Recommended 4-Way Wiring Harness and Mounting Bracket for a 2015 Toyota Sienna
  Hey Max. To attach the Curt Wiring Harness item # C56106 to your new Curt Hitch item # C13343, you'll need the No-Drill Mount Bracket item # C83DR and the Mounting Bracket 4-Pole Flat item # C42CR. The No-Drill Mount Bracket item # C83DR uses a band clamp to securely attach to the square crossbar on the Curt item # C13343. The Mounting Bracket 4-Pole Flat item # C42CR has a matching bolt hole pattern and will put your 4-way connector in a convenient location. The Curt Wiring Harness...
  view full answer...
• Towing Setup for 2026 Honda CR-V
  Hey Colt, Thanks for your question. For a Class III trailer hitch on your 2026 Honda CR-V, I'd recommend the Curt Trailer Hitch Receiver # C13397. It provides a 2-inch receiver with a 3,500-lb gross trailer weight rating and a 525-lb tongue weight rating. Keep in mind that while the hitch is rated for those capacities, you should always stay within Honda's towing limits for your specific CR-V, as the vehicle's maximum towing capacity may be lower than the hitch's rating. I've also...
  view full answer...
• Will The Curt Mounting Bracket C42CR Match Up With The Curt No-Drill Bracket C57202?
  Hey Mike, thanks for reaching out. Yes, it will! The Curt Mounting Bracket for 4-Pole Flat Trailer Connector # C42CR will match right up with the Curt No-Drill Bracket # C57202. You won't have to drill any new holes. The picture I included shows the two being used together. The part 18136 you mentioned is an older part number that has been discontinued, but the Curt # C57202 is a direct replacement for that. The two are dimensionally identical. What kind of trailer will you be hauling?
  view full answer...
• Does the Curt Hitch C13409 Block the Liftgate Sensor on a 2025 Subaru Forester?
  Hey Will thanks for the question! The Curt Hitch item # C13409 is compatible with the automatic tailgate switch on your 2025 Subaru Forester. You'll lose some of the sensors range around the 2" receiver but you're not going to want to be kicking in that area anyways once you get it installed. What do you plan on using your hitch for? If you are planning on towing you will also need a wiring harness item # C56040 and a ball mount kit item # C45534. I recommend using the No-Drill Mount...
  view full answer...
• Hitch Receiver and Trailer Wiring for 2017 Lexus RX350
  Thanks for letting us help Rick. The Curt Trailer Hitch Receiver # C73DR is a confirmed fit for your Lexus RX350 as long as you do not have the F Sport model. Once installed, the main cross tube is concealed behind the rear bumper, leaving only the 2-inch receiver visible for a nice, clean appearance. I've included an installation video we completed on a 2017 Lexus RX350 so you can see what the finished installation looks like and what's involved. Since your RX350 has the factory tow...
  view full answer...
• Can A No-Drill Bracket Be Installed On A Hitch With A Square Crosstube?
  Hey Rogelio, thanks for reaching out. It is totally fine to use a no-drill bracket like part 18140 on a hitch with a square crosstube. People do it all the time and it works out fine. It's basically a hose clamp and once you tighten it, it can secure just fine to a round or square tube. I've included a picture that shows what this looks like. That said, both of the part numbers you mentioned are for older parts that have been discontinued, but we do have available alternatives. Take a...
  view full answer...
• What do I Need for My 2021 BMW X3 M40i so I Can Tow a 6x12 Trailer to Move to a Different State?
  Hello Michael, Happy to get the right tow package together for your move to a different state. I would like to mention that just because the hitch is rated for a specific weight does not mean your car can tow that much, you will need to check your owners manual to see what BMW says you can tow, you are only as strong as your weakest link. The highest rated hitch we for your 2021 BMW X3 M40i is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76226. For...
  view full answer...
• Recommended Hitch and Wiring Harness for a 2002 Mitsubishi Montero
  Hey Rene, thanks for the information. To add a hitch to your 2002 Mitsubishi Montero, you'll want the Curt item # C13800. This is a class III, custom fit hitch with a 2" receiver, that includes all necessary hardware to bolt onto your Montero. It will not fit the Sport models and I do not have an option for a hitch that does. For a wiring harness, I recommend the Curt T-Connector item # C55380. This custom-fit T-connector plugs into your Mitsubishi's wiring harness, which is located behind...
  view full answer...
• Aftermarket Tow Package for 2026 Subaru Outback Wilderness
  Hey Don! The Curt Trailer Hitch Receiver # C67JR is a confirmed fit for all models of the 2026 Subaru Outback, including your Wilderness package. This is a great hitch for hauling a cargo carrier or bikes and also for trailer towing. It's rated at 3,500 lbs of towing weight, but you'll want to refer to your owner's manual on what the Outback is actually rated for. As shown in the photos below, this hitch is a installed behind the bumper and it's a very involved installation, so I highly...
  view full answer...
• Recommended Hitch and Trailer Wiring for a 2026 Mazda CX-90 PHEV
  Hey Angus. The correct hitch for your 2026 Mazda CX-90 PHEV is the Curt item # C74MJ. I checked with Curt and this hitch actually fits all models of the 2026 CX-90 including your PHEV. The Curt item # C74MJ is a class III hitch with a 2" receiver that comes with all hardware necessary for installation. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. The PHEV models have a lower 3,500 lbs and 350 lbs towing and tongue weight capacity so you will be limited to that....
  view full answer...
• Recommended Hitch for a 2026 Honda CR-V Trail Sport Hybrid
  It sure does Richard. The Curt Hitch item # C13397 does indeed fit the 2026 Honda CR-V Trail Sport Hybrid. This custom fit class III hitch has a 2" receiver and comes with all the installation hardware you'll need to get it installed. The Curt Hitch item # C13397 has a 3,500 lbs towing capacity and a maximum tongue weight of 525 lbs so it'll work great for towing a small trailer or hauling accessories like a bike rack or cargo carrier. I attached a couple of pictures below, and linked...
  view full answer...
• Can I Still Use the Kick Sensor when I Install the Draw-Tite Hitch on My 25 Toyota Grand Highlander?
  Hello Gene, Yes, your kick sensor will still work after installing the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT95PR. It might block the sensor slightly, so you may need to kick your foot to the right or left of the receiver to find the sweet spot, but it will still function. If you're looking for some wiring to pair with the hitch for light towing or a hitch-mounted accessory, you'll want the Curt Powered Tail Light Converter with 4-Pole Flat Trailer...
  view full answer...
• Recommended Hitch and Wiring Harness for a 2026 Kia Sorento EX Hybrid
  I sure can Jesse. The Curt Hitch item # C37RV and the Curt Wiring Harness item # C34FR73HY are indeed confirmed to fit your 2026 Kia Sorento EX Hybrid. The Curt Hitch item # C37RV is a custom fit class III hitch with a 2" receiver. It comes with all hardware necessary to complete the installation. The Curt Wiring Harness item # C34FR73HY will plug directly into the factory wiring harness behind your Kia's rear tail lights. It will provide you with a 4-way connector capable of operating...
  view full answer...
• Trailer Hitch And Wiring Options On 2021 Chevrolet Traverse
  A hitch and trailer wiring can certainly be installed on a 2021 Chevrolet Traverse. The etrailer Trailer Hitch Receiver # e56YR would be a great choice; this is confirmed to fit all models of the 2021 Traverse. It has a max towing capacity of 5000lbs, and a max tongue weight of 750lbs. Be sure to comply with your vehicle's capacity so that you don't overload. As far as the trailer wiring, I would go with the Curt T-Connector Vehicle Wiring Harness 4-Pole # C56394. This is also confirmed...
  view full answer...
• Best Option For Adding A Bracket To Attach A 4-Flat Wiring Harness
  Hi Dave! The get the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56322 attached to the frame, you are going to want the # C42CR Curt Mounting Bracket. That said, this would need to be drilled into place as it is, so I also recommend one of the following parts to make it a no drill attachment: Curt No-Drill Bracket for Trailer Connector Mounting Brackets - Short # C83DR Curt No-Drill Bracket for Trailer Connector Mounting Brackets - Long # C57202 With...
  view full answer...
• How Can I Attach C42CR Directly to Hitch?
  Hey Mike! To screw the Curt Mounting Bracket for 4-Pole Flat Trailer Connector # C42CR directly into your vehicle's hitch, I recommend using zinc-plated or stainless steel self-tapping screws to ensure they're corrosion resistant. There's no specific self-tapping screw size required for this bracket, but I'd say you need around 3/4" of length to secure it into the hitch tube. I'd avoid anything excessively long since you only need enough engagement to secure the think mounting bracket...
  view full answer...
• 4-Way Mounting Bracket to Use with 2024 Hyundai Tucson with Curt Hitch and Wiring
  Hey Ed, I would go with the part # C42CR for a 4-way bracket to use with the # CU94FR and hitch # C94WR. You'll attach this to the lower bumper edge of your Tucson and it will give it a nice and secure place to mount the 4-way. What are you towing?
  view full answer...
• 4 Flat Bracket That Attaches To The Blue Ox Hitch BLU73UR On A 2022 Subaru Crosstrek
  Hi Trevor! I wasn't sure if you meant a 4-flat wiring harness or the bracket to mount a 4-flat (or both), so I included options for both! : P Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56040 Curt Mounting Bracket for 4-Pole Flat Trailer Connector # C42CR The wiring bracket on the # BLU73UR hitch you ordered for your 2022 Subaru Crosstrek (non Hybrid) measured a smidge over 1.5 inches center to center on the mounting holes (1.58 inches to be exact)....
  view full answer...

Do you have a question about this Accessories and Part?