Eclipse Magnetic Mounting Bracket for 4-Way Flat Trailer Connectors
(9 reviews)
Price: $43.99
In Stock
Eclipse Magnetic Mounting Bracket for 4-Way Flat Trailer Connectors
Item # 306-X6019
Our Price: $43.99
In Stock
- All Info
- Reviews (9)
- Q & A (0)
- Videos (2)
- Photos
EcoHitch Accessories and Parts - 306-X6019
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- EcoHitch
Magnetic mounting bracket holds up your 4-pole flat trailer connector to prevent your plug from dragging on the ground. Strong magnet keeps bracket tightly attached to your hitch. Powder coated aluminum is durable and lightweight.
Features:
- Mounting bracket lets you secure your 4-pole flat trailer connector (sold separately) to your vehicle's hitch
- Lifts plug up off the ground to prevent it from dragging while you're not towing
- Rare earth magnet keeps bracket firmly attached to your hitch
- Install bracket in seconds - no drilling required
- Remove or reconnect to your hitch without hassle
- Low-profile design - no unsightly mounting tabs hanging off your hitch
- High-impact aerospace aluminum construction resists damage
- Powder coat finish is durable and corrosion resistant
- Made in the USA
- Limited lifetime warranty
X6019 Tork Lift Central Eclipse Trailer Wiring Mounting Bracket - Magnetic - 4-Pole Plug
Video of Eclipse Magnetic Mounting Bracket for 4-Way Flat Trailer Connectors
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for EcoHitch Eclipse 4-Way Flat Trailer Connector Magnetic Mounting Bracket Review
Rob: Rob here at etrailer.com. Today, you're going to be taking a look at the Eclipse magnetic mounting bracket for four-pole flat trailer connectors. Now it's always a good idea to have your trailer wiring permanently mounted rather than just hanging on by the hitch because it could potentially get caught on something, start dragging the road and cause a lot of damage. But with cars becoming nicer and nicer, the hitch manufacturers are trying to hide them as much as possible. So whenever we're not towing, either we have a panel that covers all of this up, or you may just have the receiver tube sticking out and the cross tube is completely hidden behind the bumper; which is nice because it gives our cars really nice clean appearance to them, or really not distracting with the hitch. But the problem arises as where do we mount our four-pole wiringA typical four-pole mounting bracket is going to look like this.
You'll have a couple holes in it so you can screw it into something. Well, I don't want to drill into the painted material on my car. And at the same time, I really don't want to mount it directly to the hitch. Now there are no-drill brackets that you can mount on there, but those typically will bring them out. In a lot of situations, it's still not going to help, because the cross tube isn't going to be visible.
Well, the Eclipse magnet mounting bracket is going to solve all of those issues. It's going to have a rare earth magnet on it, so it would be extremely strong; and basically anywhere that we can fit this and make sure we still have access to our four-pole and we have a metal service it can stick to.So our four-pole wiring. I'm going to go ahead and take the dust cover off. I'm going to slide my bracket in place. Just want to make sure those little notches are on the front side so it won't get pushed through.
And then I'll just stick it to my hitch right here, and my dust cover can go back in place. It's that easy. And if we want to move it in case our cover can't go back in place, or if we just want to kind of hide everything away, you can actually even just move it right on top so it's completely out of the way. And whenever we want to use it, grab our magnet, slide it down into place, and we can hook up our trailer.So if you're looking for a way to solve that problem of not having a good spot to mount your wiring, and also you don't want to drill into your brand new vehicle, this is going to be a great way to solve that. But again, I'm Rob here at etrailer.com; and that'll finish up your look at the Eclipse magnetic mounting bracket for four-pole trailer connectors..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Manufacturer issue
- Wrong item was ordered
Customer Reviews
Eclipse Magnetic Mounting Bracket for 4-Way Flat Trailer Connectors - 306-X6019
Average Customer Rating: 4.9 out of 5 stars (9 Customer Reviews)
Magnetic mounting bracket holds up your 4-pole flat trailer connector to prevent your plug from dragging on the ground. Strong magnet keeps bracket tightly attached to your hitch. Powder coated aluminum is durable and lightweight.by: Jeffery 09/16/2021
Worked exactly as advertised! The perfect solution for a no drill 4-flat harness. Money well spent!
by: John04/27/2021
Great service and product. Thank you
by: John04/27/2021
by: Steve 07/19/2021
by: Russell 02/11/2021
by: Leland 04/12/2023
Nice product. It has a very strong magnet which holds the connector firmly in place. However, it also allows me to move the connector to hide it behind the bumper cover when not in use, which is nice.
by: Mgoodst12/15/2019
Excellent product for flexibility of electric connection. Love it.
by: Christopher 07/22/2022
Product exactly as advertised.
by: Paul E.09/04/2019
Not sure if I will use this but the quality is great !!!!!
9
9
See what our Experts say about this EcoHitch Accessories and Parts
- Opening of Eclipse Magnetic Mounting Bracket 306-X6019I checked with EcoHitch and the opening of the Eclipse Magnetic Mounting Bracket # 306-X6019 is 5/16 inch.
view full answer...
- Will The Eclipse Magnetic Mounting Bracket Work With The T-One Vehicle Wiring Harness W/ 4 Pole FlatYes, the Eclipse Magnetic Mounting Bracket for 4-Way Flat Trailer Connectors # 306-X6019 will work with your T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # 118786. The Eclipse Magnetic Mounting Bracket is meant to fit all 4 way flat trailer connectors.
view full answer... - How To Mount a Trailer Connector To A EcoHitch Trailer Hitch ReceiverIn order to mount a trailer connector onto the EcoHitch Stealth Trailer Hitch Receiver part # 306-X7265 you can use the Eclipse Magnetic Mounting Bracket part # 306-X6019 if you have a 4-way trailer connector or the Eclipse Magnetic Mounting Bracket part # 306-X6020 if you have a 7-way trailer connector. This will provide you with a secure option to mount your trailer connector and you will not have to do any drilling into the hitch or vehicle for this because the mounts are magnetic.
view full answer... - Trailer Hitch and Wiring Needed for a 2019 Nissan LeafWe actually do have a trailer hitch for your 2019 Nissan Leaf with the EcoHitch Hidden Trailer Hitch Receiver # 306-X7221! This trailer hitch comes with a 2" receiver and features a hidden crosstube (so only the receiver is visible) so that it looks really clean installed. I have attached a photo one of our customers sent in after they installed it on their 2019 Leaf for you to check out. Then for wiring we have the Curt T-Connector # C56227 which gives you a 4-Way connector for basic...
view full answer...
- How To Mount a Trailer Connector To The Draw-Tite Hitch 76138 On a 2018 Mazda CX-5I would try to install the No-Drill Mount for Electrical Mounting Bracket part # 18140 on the underside of your Draw-Tite Max-Frame Trailer Hitch Receiver part # 76138, similar to what you see in the attached photo. The bracket may also need to be bent down some towards the ground. This is a universal bracket so there may need to be some slight modifications in order to make this work for you. That said, you could drill the Mounting Bracket 4-Pole Flat part # 18144 directly to the underside...
view full answer...
- Trailer Wiring Recommendations for 2020 Subaru CrosstrekFor your 2020 Subaru Crosstrek I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467. It gives you all the required lights you need to tow a trailer safely down the road, tail lights, turn signals and brake lights. I think the best part of the wiring is that there's no cutting or splicing at all, it simply plugs into a port in the rear hatch area of your Crosstrek. The floor coverings and a few panels will need to be removed and you can use a trim panel...
view full answer... - Correct EcoHitch Trailer Hitch and Wiring Harness for 2020 Kia Sorento EX Without Tow PackageI can definitely confirm for you the correct EcoHitch trailer hitch, wiring harness, and mounting bracket for your 2020 Kia Sorento. The first thing is the EcoHitch, which you correctly noted for your '20 Sorento was the EcoHitch Hidden Trailer Hitch Receiver # 306-X7320. In regards to the wiring harness for your Sorento sans towing package, the Curt T-Connector Vehicle Wiring Harness # C56256 will work, but they are not the most reliable harnesses. For the most reliable trailer wiring...
view full answer... - Hidden Trailer Hitch and Easy Wiring Recommendation for 2019 Kia Sorento LXThe EcoHitch Hidden Trailer Hitch Receiver # 306-X7320 is the only hitch available for your 2019 Kia Sorento LX that features a hidden crossctube design. It has a towing capacity of 3,500 lbs and a tongue weight rating of 525 lbs which should work well to tow your R-Pod travel trailer. The installation is also pretty straight forward; if you're mechanically inclined, it should only take about 40 minutes to complete. Check out the installation video I've linked for you at the bottom of the...
view full answer...
- Options for Mounting a 4 Flat to a 2019 Honda OdysseyWith the Draw-Tite # 76170 being as hidden as it is once installed on a 2019 Honda Odyssey, it will not have the bracket to attach a wiring plug. The first option to get wiring like the Curt # C56382 installed will to actually just store it in the back of you Odyssey. I included an install video showing this, but if you prefer to have it mounted outside the vehicle, you may still be able to. We do not have any videos showing how this will be done, unfortunately, but that does not mean...
view full answer... - Will 2015 Mini Cooper Center Exhaust Damage Trailer While TowingYour trailer will be completely safe from your 2015 Mini Cooper exhaust with the EcoHitch Hidden Trailer Hitch Receiver # EH67FR installed. To complete your trailer towing setup you need the Curt Powered Tail Light Converter # C59236, the Eclipse Magnetic Mounting Bracket # 306-X6019, and a ball mount to match the height of your trailer. Be sure to mount the wiring bracket out to the side of the hitch because the exhaust will definitely melt the wiring if you have it close to the exhaust....
view full answer... - Is 2023 Tesla Model 3 TorkLift Wiring The Same as ZCI Wiring KitFrom what I'm seeing it does look like the TorkLift TY2020 wiring kit is the same as our ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT. The ZCI kit is excellent for your 2023 Tesla Model 3 because you aren't getting into the vehicle wiring and cutting it up - just putting clamps over it. If you're planning on installing the EcoHitch Stealth Trailer Hitch Receiver # EH84GR then I also recommend picking up the following so you have a clean-looking setup: - Undercover Access...
view full answer... - Recommended Wiring and Brake Controller for 2017 Audi Q5 with Draw-Tite Trailer HitchThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75940 is a great choice for your 2017 Audi Q5. We don't have any specific places that we recommend for installation so we tend to recommend looking for a place that you trust or that has a good reputation to perform the installation. Then for wiring I recommend the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT because it not only protects your OEM wiring but it also is a "Zero Contact Installation" which means you don't...
view full answer... - Are Any Other Fuses or Relays Needed to Install Curt Wiring on 2022 GMC TerrainNope! The 2 relays that come with and install on the Curt T-Connector Vehicle Wiring Harness # C94FR are all that you should need for adding a 4-Way connector on your 2022 GMC Terrain with the factory tow package. I also recommend checking out the Eclipse Magnetic Mounting Bracket # 306-X6019 so that you will have easy access to the 4-Way wiring right next to your hitch receiver. If you don't already have a trailer hitch then I recommend the Curt # C77FR because it has a hidden crosstube...
view full answer... - How to Tell if My 2019 Audi Q5 Has Factory Trailer WiringBasically if you look at the rear of your 2019 Audi Q5 and you don't see a trailer connector then you don't have one from the factory. Worst case scenario you can call your local dealer with your VIN and they will be able to confirm either way. Since you're looking into installing a hitch I would be very surprised if you already have wiring but no hitch - those are usually installed together if they are from the factory. So in addition to the Draw-Tite Trailer Hitch # 76183 that you're...
view full answer... - Installation Times for Trailer Hitch and Wiring on a 2022 Toyota Corolla CrossFor the Curt Trailer Hitch Receiver # C64DR you're looking at about 2 hours while the Curt Powered Tail Light Converter # C59236 is going to be at least an hour. These are the approximate installation times the manufacturers have given but it can vary depending on the skill level and tools available for the installer. If you plan on doing this yourself I would plan on it taking a good chunk of a Saturday (or whatever day is your day off work) to get it all installed on your 2022 Toyota...
view full answer... - Trailer Wiring Harness Recommendation for a 2023 Hyundai PalisadeTo install trailer wiring on your 2023 Hyundai Palisade you'll need the T-Connector Wiring Harness # C43FV which tees in behind your tail lights and pulls power directly from your vehicle battery via the included lead wire. I also recommend picking up the Eclipse Magnetic Mounting Bracket # 306-X6019 so you can secure the 4-Way connector near your hitch receiver like the etrailer Trailer Hitch # e95ZR.
view full answer... - Does EcoHitch Trailer Hitch Match Towing Weight Rating of 2022 Subaru Outback WagonThe EcoHitch Hidden Trailer Hitch Receiver # EH34FR has a max towing weight of 3,500 lbs which from what I could find online is the max towing capacity of your 2022 Subaru Outback Wagon - you'll want to confirm this in your copy of the owner's manual though. To complete your towing setup you also need wiring and a ball mount setup. I recommend the Curt T-Connector # C56040 wiring kit because of the higher amp rating, and then the TowSmart Towing Starter Kit # TS94FR because it comes with...
view full answer...
- How to Mount 4-Way Wiring to Curt Trailer Hitch on a 2018 Honda CR-VI'm guessing you have a 4-Way connector on your 2018 Honda CR-V, and I do have a couple of options for you to secure a 4-Way flat connector to the Curt Trailer Hitch # C13397! The first is a combination of the brackets # C57202 and # 18144. These are our go-to brackets for mounting wiring here at etrailer but the only issue I see here is bending that longer bracket to fit around the rear fascia since the crosstube is tucked up nice and neat behind the fascia. The second option is the...
view full answer... - Does 2021 Subaru Outback Wagon Exhaust Need to be Dropped to Install Bolt Into FrameThanks for reaching out! To properly torque the 7/16 bolts that come with the Curt Trailer Hitch Receiver # C67JR for your 2021 Subaru Outback Wagon I do recommend dropping the exhaust if you aren't able to get a standard socket around corresponding nut. You can use a swivel-type socket like what you saw in the video to torque down the bolt, sure, but then you'll be losing an unknown amount of torque so the reading will likely be incorrect and the bolt won't be installed properly which...
view full answer... - Recommended Hidden Hitch for a 2020 Subaru ForesterThanks for reaching out! The closest hitch design we have to something that sits in the bumper on your 2020 Subaru Forester is the Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT24YR. The crossbeam is installed behind the bumper and then there is a removable receiver so you can retain that OEM look when you aren't towing or utilizing a bike rack. If you'll be towing with this hitch then you'll also need the T-One Wiring # 118467 and I recommend the Eclipse Magnetic Mounting Bracket...
view full answer... - Wiring Recommendations for 2020 Hyundai Palisade LimitedFor your 2020 Hyundai Palisade Limited edition you will need a wiring kit to transfer the light signals to your trailer, the pre-wiring provides a plug for the trailer wiring to hook up. I recommend Curt T-Connector Vehicle Wiring Harness # CU94FR. It provides a 4 way flat trailer connector and hooks directly into the tow package plug on the underside of your Palisade. It is a 1 piece, or 1 end connector, however there are adapters that will allow you to have both a 7 and 4 way like your...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Chris R
Written by:
Alexander C
Video by:
Jonathan Y
Test Fit:
Robert C
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.