Best Option For Adding A Bracket To Attach A 4-Flat Wiring Harness
Updated 07/31/2026 | Published 07/25/2026
Products Featured in This Question
Question:
My Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector I need the bracket to hold the connector to the frame. Thanks!
asked by: David A
Expert Reply:
Hi Dave!
The get the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56322 attached to the frame, you are going to want the # C42CR Curt Mounting Bracket. That said, this would need to be drilled into place as it is, so I also recommend one of the following parts to make it a no drill attachment:
Curt No-Drill Bracket for Trailer Connector Mounting Brackets - Short # C83DR
Curt No-Drill Bracket for Trailer Connector Mounting Brackets - Long # C57202
With how far back the hitch crossbar is once installed on a 2018 Pacifica, I think the longer # C57202 will be the better option between the two. Either way you go, it will make attaching everything a lot easier.
Are you going to be using the wiring for lights on a bike rack or for towing a trailer?
(click to enlarge)
Product Page this Question was Asked From
Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- CURT
more information >
Continue Researching
- Q&A: Looking For Brackett For 4-Pin Flat Connector
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Will The Curt Mounting Bracket C42CR Match Up With The Curt No-Drill Bracket C57202?
- Q&A: Will the Tekonsha Wiring Work on My 2025 Santa Cruz? Complete Tow Package for 2025 Santa Cruz
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Hitch And Wiring For A 2024 Subaru Outback
- Q&A: Will The etrailer Hitch for the 2026 Jeep Compass Cause any Dash Lights to Come on
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Which Hitches are Made in the USA
Chuck
7/30/2026
I ended up not installing it and decided to just run the trailer wires out the hatch when I need it. On my vehicle I would've had a drill a hole through the body to get the wires out and I decided not to do that.