Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2-1/2" Hitch

See what our Experts say about this CURT Accessories and Parts

• Will the Curt Trailer Hitch C15810 Fit a 2005 Ford F-350 With 18 Inch Spare Wheel/Tire
  The tech tip that you are referring to on the Curt Trailer Hitch Receiver part # C15810 for your 2005 Ford F-350 is in reference to the diameter of the wheel. Since you have an 18" diameter spare wheel under your truck then you will not have any issues installing this trailer hitch. In order to mount your 4 and 7-way trailer connector to the above trailer hitch you will need to use the Curt Easy Mount Bracket for Trailer Connectors part # C58003 or the Curt No-Drill Bracket for Trailer...
  view full answer...
• Mounting Bracket That Works With ETBC7
  The Curt Easy Mount Bracket # C58003 would not work for you because it is for a 2-1/2" hitch. Instead, you would want to use Easy Mount Bracket # C58000. Another simple option would be the Curt No-Drill Bracket # C57202. I've added links to video reviews of each option for you to take a look at.
  view full answer...
  
• Curt Easy Mount Trailer Wiring Connector Recommendation for Class III 2 inch Hitch
  For a 2 inch hitch Class III hitch you'd want the Curt Easy Mount part # C58000 as the part # C58003 is for 2-1/2 inch hitches. This measures 10 inches long and 3-1/4 inches tall.
  view full answer...
• How To Mount 7-Way Connector To Curt Trailer Hitch Receiver C15810
  I have another option for you, but there is not a no drill mounting bracket that has a longer clamp than the # C57202 you purchased. Instead I recommend the Curt Easy Mount Bracket # C58003 which will mount to the receiver tube of the Curt Trailer Hitch Receiver # C15810 you purchased and installed. I included a video of the 2" version of the # C58003 being installed for you to take a look at.
  view full answer...
• Recommended Vehicle Wiring For Towing a Trailer With a 2022 Hyundai Palisade
  As you will be installing the etrailer Trailer Hitch Receiver # e95ZR on your 2022 Hyundai Palisade I recommend the Curt T-Connector Vehicle Wiring Harness # CU94FR. This will give you a 4-way flat connector that is needed for pulling most small trailers or using Auxiliary Lights # C53201 with any hitch mounted accessory that impairs the view of the tail lights on your Palisade. If all your trailer requires is a 4-way flat connector then you are done and only need the Curt Easy Mount Bracket...
  view full answer...
• Wiring Mounting Bracket Needed for Trailer Hitch on a 2017 Ram ProMaster 2500 with 2-1/2" OD
  Although it would seem that you would want to measure the OD of your trailer hitch when looking at the Curt Easy Mount Brackets like part # C58003, you really want to measure the ID of the hitch receiver itself. Since trailer hitches are identified by the ID of the receiver, accessories are labeled to fit the common ID measurement as opposed to the OD of the receiver. From what you described you probably have a 2" trailer hitch which means you would want part # C58000 instead. This is...
  view full answer...
  
• How to Secure 7-Way Socket to Draw-Tite Hitch on a 2017 Volvo XC90
  Hi Emily! The hitches with hidden crosstubes, like the Draw-Tite # 76194 for your 2017 Volvo XC90, look nicer than a standard hitch style but they do present a challenge when it comes to establishing an anchor point for a wiring kit. Some people will simply bolt the mounting bracket that comes with the Universal Wiring Kit # ETBC7 directly to the bumper but I recommend either using the No-Drill Mount Bracket # 18136 by bending this bracket some to clear your fascia, or the Curt Easy Mount...
  view full answer...
• Where Would Hopkins 4- and 7-Way Trailer Connector Install on a 2010 Jeep Liberty
  None of the reviews for 4- and 7-Way trailer connector # HM40975 mention installation on a 2010 Jeep Liberty. But there isn't a specific place that it has to go. You could attach it to the bottom of the fascia but most people do not like to put holes in the vehicle body. What you could do is use # HM40950 which requires the same round connector on the vehicle to plug into the back, like # HM40975 also does, and then use Curt Easy Mount bracket # C58003 which clamps around the receiver...
  view full answer...
• Will The Hands Free Lift Gate Work On a 2022 Honda Pilot With a Trailer Hitch Receiver Installed?
  With the etrailer Trailer Hitch Receiver # e98840 installed on your 2022 Honda Pilot you will need the relocation bracket that you can get from your local Honda dealer to ensure that you do not lose the ability to use your hands free liftgate. This bracket simply moves the sensor from directly centered on the bumper to a few inches to the side which allows for your foot to be detected by the sensor. The same will be true for the Curt # C13146 Receiver. I do recommend installing your...
  view full answer...
• No Drill Mounting Bracket For Attaching 7-Way To Curt Trailer Hitch Receiver On a 2022 Toyota Sienna
  With the Curt Trailer Hitch Receiver # C22UR for your 2022 Toyota Sienna having a round crosstube I recommend using the Curt Easy Mount Bracket # C58003 which will attach to the end of the receiver tube. Using a No-Drill Mount Bracket # 18136 there is a chance it can slide on the round tube due to the weight of the 7-Way # ETBC7.
  view full answer...
• Recommended Trailer Hitch Receiver, Wiring and Brake Controller For a 2022 Toyota Highlander Hybrid
  I recommend the etrailer Trailer Hitch Receiver # e75ZR for your 2022 Toyota Highlander Hybrid. This will bolt into the existing holes already on the frame of your Highlander. It is rated for towing up to 500lbs of tongue weight and a trailer up to 5,000lbs. Be sure to not exceed any ratings given from Toyota on your specific Highlander. The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK57VR will give you all the wiring needed to install a 7-way connector...
  view full answer...
• Are Relays Required When Installing T-One Wiring Harness on 2019 Nissan Pathfinder
  I know it seems like there are extra steps to take for installing the T-One # 118273 on your 2019 Nissan Pathfinder but it all just boils down to this; without those relays installed the T-One won't receive any power. Basically these act as fuses so without a fuse the circuit is dead. I'm not sure why Nissan decided to locate the plug in the rear hatch area but that's where it sits on your Pathfinder. If you had the factory tow package you'd be able to go to that same location and see a...
  view full answer...

Do you have a question about this Accessories and Part?