bing tracking image
  1. Trailer Leaf Springs
  2. Universal Group
  3. Double Eye Springs
  4. 23-1/2 Inch Long
  5. 2000 lbs
  6. 3 Leaf
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long
Universal Group

3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long

Part Number: SP-113275
In Stock
$53.76
Trailer Leaf Springs
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter. Great Prices for the best trailer leaf springs from Universal Group. 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long part number SP-113275 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3611)
  • Q & A (0)
  • Photos

Universal Group Trailer Leaf Springs - SP-113275

Highlights

  • Supports 2,000-lb Axles: Handles light-duty trailers while keeping the ride stable and level.
  • 23-1/2" Eye-to-Eye Length: Provides proper fit and axle alignment for smooth suspension travel.
  • 3-Leaf Spring Stack: Flexes to absorb bumps and road shock for a more controlled towing feel.
  • 1-3/4" Wide Steel Leaves: Built from spring steel for strength that resists sag over time.
  • 9/16" ID Nylon Bushings: Ready to mount for quiet, low-friction movement at the spring eyes.
  • Replace in Pairs: Keeps suspension geometry even and prevents uneven tire or axle wear.

Features to know about

Smooth, Controlled Ride on Rough Roads: 3-Leaf Double-Eye Spring Handles the Shock

A harsh ride beats up your trailer and cargo. This 3-Leaf Double-Eye Spring flexes to absorb bumps and vibration so the trailer rides steady over rough roads. Each spring is built for a 1,000-lb capacity, giving a total axle rating of 2,000 lbs. The 23-1/2" length from eye to eye and 1-3/4" width match common light-duty setups. Its spring steel construction resists fatigue and keeps its shape after long miles, helping keep everything level and controlled.

Reliable Axle Support That Stays True: 9/16" Eye Nylon Bushings Keep Movement Smooth

Loose or worn bushings can throw off your alignment and shorten suspension life. This spring includes nylon bushings with 9/16" inner diameter already installed for a snug fit on standard suspension bolts. They allow the spring eyes to pivot smoothly inside their hangers or shackle straps, reducing friction, noise, and wear so the suspension moves freely the way it should.

Solid Foundation for Any Build or Repair: Built from Sturdy Spring Steel

Whether you’re replacing a tired factory setup or fabricating a new trailer, this spring gives you a tough, dependable foundation. It’s made from medium-carbon spring steel designed to flex under load and return to its original shape. The 3/8"-thick leaves share the load evenly for better strength and long-term durability. It’s the kind of part you can install once and count on for consistent support.

Simple Fit with Standard Hardware: Designed for Common Hanger and Shackle Setups

Getting everything lined up right is straightforward. The spring’s 23-1/2" eye-to-eye length works with standard hanger spacing—about 23" on center for a single-axle trailer. Each end connects using common hangers, shackle straps, and suspension bolts (sold separately), so you can drop it into an existing system or pair it with new hardware during a rebuild. Its straightforward fit makes it a dependable choice for smooth, level towing.

Specs

Quantity and Capacity

  • Quantity: 1 leaf spring
  • Spring capacity: 1,000 lbs
  • Axle capacity: 2,000 lbs

Dimensions

  • Length from center of spring eye to center of spring eye (unloaded): 23-1/2"
  • Spring width: 1-3/4"
  • Eye diameter with bushing: 9/16"
  • Eye diameter without bushing: 11/16"
  • Leaf thickness: 3/8"
  • Number of leaves: 3

Additional Dimensions

  • See table below.
Part NumberABCD
SP-11327511-3/4"12-5/8"23-1/2"3-1/2"

Technical diagram of a double-eye trailer leaf spring showing labeled measurements A, B, C, and D with dimensions for 3-leaf spring SP-113275 used on 2,000-lb trailer axles.

  • A: 11-3/4"
  • B: 12-5/8"
  • C: 23-1/2"
  • D: 3-1/2"

Note

  • To ensure proper axle alignment and suspension performance: leaf springs should always be replaced in pairs.

UNA-113 Universal Group Double Eye Trailer Leaf Spring - 3 Leaf - 1,000-lb Capacity





Customer Satisfaction Score:

Ratings & Reviews

4.8

3611 reviews
5 Stars
(3145)
4 Stars
(344)
3 Stars
(74)
2 Stars
(16)
1 Star
(32)
Review sort icon
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

by:

thank you for your quick and excellent service. the springs look great and are exactly what I ordered. thanks again, Bud



by:

Fast delivery. Easy mounting and balanced the trailer well.



by:

Excellent searchability on the website, great customer service, and fast shipping!



by:

Exactly as advertised, impressively fast shipping.



by:

The parts were right on. The informational videos were very helpful in determining the parts needed. This is my second order using e trailer and I'm very happy.



by:

Great website, quick shipping, good customer service thank you



by:

All the products I have purchased are exactly what I ordered and delivered right on time. Always great products and service with eTrailer.com.



by:

Just what I needed. Springs fit perfect for my trailer repair job. Great service from etrailer.



by:

Thank you etrailer for getting these springs quick,fast and in a hurry!
Much appreciated!
Good website with product description that makes it easy to be sure I’ve ordered the correct part.



by:

Leaf spring was exactly as described. Fit trailer perfectly and was easy to install. Shipping was quicker than expected. Satisfied to the point I ordered 2 more for a older trailer I have.



by:

As usual, etrailer came through with the springs Ineeded when no one else had them. Second order from them (fast shipping to).
Will use them for any trailer items.



by:

Excellent delivery time , product came as advertised however I ordered the wrong part number . I needed a heavy spring as our axle is 3500 pd not 2000 but put in another order as soon as I can .
Thank you for providing good products, great delivery time and fair prices.
Be Blessed



by:

springs fit well and are the right rating for my small sailboat. The only downside is that I'm seeing rust beginning already on the spring finish. They need to do more with the protection/weatherproofing coatings.



by:

I ordered a pair of leaf springs for my boat trailer. I received them two days sooner than expected and they are an exact match. I am very happy with the product and service I received from (etrailer.com).



by:

Super fast shipping springs were just what I needed found lots of information on etrailer website on how to measure also great seller will be using them again when needed



by:

Kind of hard to rate at this time. Only time will tell how good they are. I didn't catch it in time but, these springs have only the plastic bushing in the eyes with no rubber bushing for cushion like some Iv'e seen. Made in China but what ain't. They seem to be a good spring and I'm sure they'll work fine. Excellent service.



by:

Bought 4 leaf springs, bolts, bushings, etc... Needed it next day, and the shipping cost more than the parts, which tells me the parts were a great price. All was well, on time, and to order. The only problem was I should have ordered two more shackle bolts... but that's on me. Thanks Guys and Gals. I am a happy 62 year old Marine Vet back on the road!



by:

As you know from my order I changed the entire suspension on my 1996 Terry fifth wheel. I found your website ease to navigate and order what I needed. Your pricing was not overly high and your shipping was fast. Now with my new suspension I should get another 23 years of use out of my trailer. Thank you.



by:

Fast shipping this was my 3rd order and there always ready to help and always great service

Troy profile picture

Troy

3/24/2024

Use it everyday for work. No trouble at all.



by:

Great leafsprings great fit . Very fast shipping. Thanks alot

David profile picture

David

11/5/2017

Still on great shape and working fine



by:

Over the top- always beyond expectation. Buy here!!



by:

I found the site to be informative and detailed to enable me to make the best/correct order. Better than that was the prompt shipping and receipt of the Leaf Spring that will enable use to get back to camping very soon. I received the Spring prior to the estimated delivery date.

David R. profile picture

David R.

7/7/2022

The part was the correct one and works great



by:

I had a trailer spring break this summer on the way home from a 2,700 mile trip. Our small luggage trailer just couldn’t take anymore rough roads. One of the springs broke through the centering bolt. The etrailer.com website and Tammie P. came through with replacement springs and accessories. Thank you Tammie P. And trailer.com!



by:

Just what I needed, my trailer is now much happier and not bouncing around so much!



by:

It was a direct replacement. Its made in china but what isn't. Seem to be better quality than was was originally on my little trailer. Everything fit and lined up perfectly.


25
25

See what our Experts say about this Universal Group Trailer Leaf Springs

  • How to Determine if Slipper Spring SP-177275 Will Fit Trailer
    I can tell you how to determine if the 2-Leaf Slipper Spring for 1,000-lb Trailer Axles # SP-177275 will fit your trailer, though we do not have information regarding fits for individual trailers. The best way to determine if a slipper spring will fit is by measuring the length from the center of the spring eye to the end end of the spring, as you can see in the accompanying diagram. The best way to get an accurate length of a leaf spring is with the trailer up on jacks with the axle...
    view full answer...
    Image 1 for
  • Determining Hanger Spacing for Replacement Leaf Springs on Trailer
    The closest leaf spring set we have available to the 22-1/4 inch length you mentioned is the 3-Leaf Double-Eye Spring # SP-113275. This double-eye leaf spring features a length of 23-1/2 inches from the center of the spring eye to the center of the other spring eye. I recommend making sure you are measuring your existing leaf spring from the center of one eye to the center of the other. This particular set is designed for 2,000 pound axles, so you will want to also make sure any new springs...
    view full answer...
  • Replacement Parts for 1987 Trailer
    Hi Tim; I can get you everything aside from the hangers. All of our standard hangers are designed to weld on but you may be able to find that bolt-on style elsewhere online or at a local shop. Hangers like those do still exist although I'm not sure how easy they are to find. We don't have complete kits but I can piece it together for you. For the rest of your setup we have the following: -Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs # T20BTR-EZ-7258 -Spring...
    view full answer...
  • Replacement For 3,500 lb Leaf Springs That Measure 23-3/4 Inches Eye to Eye
    Hi Tim, Appreciate the photo as those leaf springs definitely look worn so you're smart to replace them. And we do have an option to replace yours, because leaf springs also flatten a bit over time, so you should go with ones that measure a bit shorter than what you currently have. So for your 3,500 lb springs that now measure 23-3/4" eye-to-eye, what I recommend going with is the 23-1/8" 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles # e59SR.
    view full answer...
  • Replacement Marine Axle with 46 1/2" Spring Seat Center for PWC Trailer
    Hi John, I wouldn't go with a 60" axle because it will move your tires further out away from the trailer and would require different length leaf springs as well. Based off your measurements, the CE Smith Trailer Axle w/Idler Hubs part # CE33201GA-HUB would be the perfect solution for you. It has a 57 1/2" hub face measurement and comes with 5 on 4 1/2 galvanized idler hubs with all the bearings and seals you'll need to install it. The spring seat measurement is 46 1/2" which is exactly...
    view full answer...
  • Hanger Kit to Install Leaf Spring on Trailer that Has Slipper Springs
    You could pretty easily install the springs you have but you will need to use a single axle trailer hanger kit like part # APS4 as the bushing sizes and hangers you have now won't work with the spring you have part # SP-113275.
    view full answer...
    Image 1 for
  • Can 3-Leaf Double-Eye Spring Replace 5-Leaf Spring
    Hi Jim; a 3-leaf spring like the # SP-113275 can replace your current 5-leaf springs. The only possible benefit may be a little more structural integrity with the extra material but if they're rated the same it doesn't matter enough to worry about finding a 5-leaf. As long as you are not exceeding the 2,000 lb capacity of the leaf springs you're fine.
    view full answer...
  • Determining the Correct Leaf Spring Length for Trailer
    There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking at an approximation. Those leaf springs appear to be in good shape, so assuming they are factory leaf springs I would continue to use them. When installed, the shackles in the rear should be in a position that will allow the suspension to move....
    view full answer...
    Image 1 for
  • Trailer Leaf Spring Recommendations for a Boat Trailer with 1,900 Pound Boat
    The leaf springs should be rated to match the axle on the trailer. Spring # e27SR is rated for 2,250 pounds per spring so it fits 4,500 pound axles. These springs would be overkill for a boat weighing up to 1,900 pounds and it would be a very stiff and jarring ride for your boat. Your trailer axle may have a capacity listed on it somewhere and if not then there should be some capacity information on a placard or sticker near the front of the trailer somewhere. Whatever the gross capacity...
    view full answer...
  • Should Equalizer and Shackles Be Replaced After Being Shoved Out of Position
    Thank you for providing the picture. However you hit that wood it managed to shove the one side up so far it pushed the other side into that position which prevented your wheel from coming back down. I wouldn't say something was necessarily "wrong" other than the fact that the suspension was pushed in an abnormal way from the wood. Go ahead and inspect the shackles, bolts, and equalizer to see if there are any stress marks or anything indicating damage. If there wasn't a lot of lateral...
    view full answer...
    Image 1 for Image 2 for
  • How To Determine Hanger Spacing for Single Axle Trailer Suspension Based on Leaf Spring Length
    The trick for hanger spacing is to subtract around 3/8 of an inch from the spring length (eye to eye) and then use that dimension for the hanger spacing on a single axle trailer. So for a 23-1/8 inch long leaf spring a spacing of 22-3/4 inches would be the correct dimension to use.
    view full answer...
  • Can Center Bolt Be Ran from the Bottom Up on Trailer Leaf Spring # SP-113275
    Yes, if you look closely at some of the pictures you can see the center bolt for leaf spring # SP-113275 goes through the stack and into a nut on the bottom. So in other words it can be reversed. Please note it would be a good idea to secure the spring using vises or clamps in order to keep the spring stack in position and so no residual tension can cause a leaf to possibly cause an injury. Do not work on springs when they are under load (still on the trailer).
    view full answer...
  • What Happens if Trailer Leaf Spring Shackle is Almost Flat
    Hey Tom, thanks for the picture. So the problem will be that when you hit a bump the spring will run out of room to flatten out so the suspension will essentially get very hard at that point and the trailer will bounce pretty hard. I would recommend going with a shorter length spring or moving your hangers out further.
    view full answer...
  • Replacement Double Eye Leaf Spring That Measures Out To be 24 Inches Eye To Eye
    Over time leaf springs flatten out after a constant use. With your spring measuring out to be 24 inches eye to eye The 3-Leaf Double-Eye Spring # e66SR will not work for you. You would need The 3-Leaf Double-Eye Spring # SP-113275. This spring has a sturdy steel construction that has the nylon bushings included. It has a spring capacity of 1,000 pounds and has an axle capacity up to 2,000 pounds. From eye to eye on the spring is 23-1/2 inches, and has a spring width of 1-3/4 inches. You...
    view full answer...
  • Recommended Jet Ski Trailer Leaf Spring U-Bolt Mounting Kit for 1-1/2 Inch Square Axle
    Recommended U-bolt Kit for square 1-1/2 inch axle and # SP-113275 springs is the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc # CE23102. This will work much better than the u-bolt that is simply used diagonally in your current photos. These are plates are galvanized and the hardware is zinc plated so they are ideal for your Jet-Ski trailer as they resist rust and corrosion.
    view full answer...
    Image 1 for Image 2 for
  • What Causes a Trailer to Bounce
    A trailer can bounce if there is not enough weight on it. You see this particularly with utility trailers that are empty. The tire and wheel size would not automatically cause a trailer to bounce though usually you see smaller tires on smaller trailers and smaller trailers tend to be light weight. So again it really comes back to weight. It is also possible that there is too much tongue weight and/or the trailer is being towed nose down. This would limit the weight that is over the axle(s)...
    view full answer...
  • How to Choose the Best Tires, Wheels and Axle for a Homemade Jet Ski Trailer
    Finding the ideal tires, wheels and axles for your trailer will depend heavily on the overall weight of the trailer. For example, a jet-ski can weigh as little as 400-500 lbs on the light end and around 1,000 lbs on the heavy end. You must also consider the weight of the trailer itself sitting on the axles. Also, keep in mind that if the axle is positioned properly, the tongue of the trailer should hold about 10 percent of the total weight. For example, let's assume that your jet-skis...
    view full answer...
    Image 1 for
  • Available 23-1/2 Inch Replacement Double Eye Spring
    We carry one 23-1/2" double eye spring, # SP-113275. This spring is for a 2,000 lb axle, has three leaves, a spring width of 1-3/4", an eye diameter with bushing of 9/16" and an eye diameter without the bushing of 11/16". I've added a link to a video review of this spring for you to take a look at.
    view full answer...
  • Correct Replacement 23-3/4" Long 3-Leaf Spring for Trailer
    It's common for trailer leaf springs to stretch a bit as they age so the correct replacement for your trailer is the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles part # SP-113275. This leaf spring has three leaves that each measure 1-3/4" wide, just like your old so it will be a direct replacement for your trailer. Please note, it's recommended to replace the leaf springs in pairs.
    view full answer...
  • Recommended Double-Eye Suspension System for 2,000 lb Single Axle Boat Trailer
    For your single axle boat trailer, I recommend the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear # APS2 along with the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long # SP-113275. I've attached a photo with spring measurements to assist as well as an article on suspension.
    view full answer...
    Image 1 for
  • Troubleshooting Front Wheels Lifting on Dual Axle Trailer
    It sounds like your shackle straps are binding or flipping and this should not be, so you will want to determine the cause of your suspension issue. It could be shackle strap length, equalizer length, or leaf spring length causing the issue. I recommend having it looked at because an axle off the ground and slamming down will cause damage over time. I've attached an article on suspension to assist.
    view full answer...
  • Recommended Suspension Components for 2014 Flagstaff MAC 206 LTD Camper
    To help you with the replacement parts you need, you will need to measure your springs from eye to eye. We have the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long # e84SR, the 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long # e77SR, or the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long # SP-113275. If you are replacing one hanger, then you will need to know the dimensions. I have attached the link to your options. If you are replacing...
    view full answer...
    Image 1 for
  • Recommended Leaf Springs and Hardware for 2001 EZ Loader Boat Trailer With 1560 lb Axle
    There are different leaf spring lengths available for your axle capacity, so you will need to measure from the center of spring eye to spring eye. We have these 3 options: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long # e84SR 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long # e77SR 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long # SP-113275 For your connection to your hangers, you will want the Shackle Bolt with Locknut for Double-Eye...
    view full answer...
  • What Kind of Steel are Trailer Leaf Springs Made of
    The steel of the trailer leaf springs like part # SP-113275 is spring steel which is designed to flex and go back to it's original shape. Spring steel is typically low-alloy manganese, medium carbon steel.
    view full answer...


< Previous
12




Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Kevin C
Installed by:
Kevin C
Employee Jacob T
Video Edited:
Jacob T
Employee Alexander C
Written by:
Alexander C
Employee Thomas T
Video by:
Thomas T
Employee Manda E
Updated by:
Manda E

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924