What Kind of Steel are Trailer Leaf Springs Made of
Updated 08/06/2018 | Published 08/04/2018
Question:
Was wondering if you know what kind of steel these are made of
asked by: Steve L
0
Expert Reply:
The steel of the trailer leaf springs like part # SP-113275 is spring steel which is designed to flex and go back to it's original shape. Spring steel is typically low-alloy manganese, medium carbon steel.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 2000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 23-1/2 Inch Long
- Standard Grade
- Universal Group
more information >
Continue Researching
- Q&A: Width of Roadmaster Bushing RM47GR
- Q&A: Replacement Parts for 1987 Trailer
- Q&A: How to Flip a 1-3/4" Diameter Axle So the Springs are Above the Axle
- Q&A: What Fenders will Work on My Nitro Boat Trailer with 14" Wheels that are 66" Long?
- Q&A: Moving Trailer Axle from Below Leaf Springs to Above the Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Bearings and Grease Seal for Terran Axle Idler Hub
- Q&A: Can Double Eye Trailer Leaf Springs Install Without Shackles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight
- Article: Where to Position the Trailer Axle?