bing tracking image
  1. Trailer Leaf Springs
  2. etrailer
  3. Double Eye Springs
  4. 25-1/8 Inch Long
  5. 2500 lbs
  6. 3 Leaf
3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
etrailer

3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long

Part Number: e66SR
In Stock
$34.99
Trailer Leaf Springs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter. Great Prices for the best trailer leaf springs from etrailer. 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long part number e66SR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (36)
  • Q & A (0)
  • Photos

etrailer Trailer Leaf Springs - e66SR

  • Double Eye Springs
  • 25-1/8 Inch Long
  • 2500 lbs
  • 3 Leaf
  • 1-3/4 Inch Wide
  • Painted
  • etrailer

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.


Features:

  • Leaf spring acts as part of your trailer's suspension system
    • Provides attachment point for your trailer's axle
  • Multiple leaves allow flexibility to absorb road shock
    • Allows for a smooth ride
    • Reduces wear and tear on trailer
    • Ensures level ride on bumpy and uneven surfaces
  • Sturdy steel construction
  • Nylon bushings included
  • Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation
    • Spring attaches to hanger mounted on trailer frame at one end
    • Other end connects to shackle straps suspended from hanger or equalizer


Specs:

  • Quantity: 1 leaf spring
  • Spring capacity: 1,250 lbs
  • Axle capacity: 2,500 lbs
  • Length from center of spring eye to center of spring eye (unloaded): 25-1/8"
  • Spring width: 1-3/4"
  • Eye diameter with bushing: 9/16"
    • Eye diameter without bushing: 11/16"
  • Leaf thickness: 5/16"
  • Number of leaves: 3
  • Additional dimensions: see table


Double-Eye Spring Diagram

Part NumberABCD
e66SR12-9/16"13-5/16"25-1/8"3-3/16"


Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.


Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer. Each spring flexes to absorb road shock as you travel, allowing the axle to move somewhat independently of the rest of your trailer. This helps to reduce wear and tear on the trailer and also ensures a smooth ride.


Double-eye leaf springs attach to hangers that are welded onto your trailer. One end of this spring will attach directly to the hanger with a suspension bolt. The other end will attach to shackle straps that are suspended from a hanger. These straps allow the spring to move and pivot so that it can better compensate for uneven pavement. If you have a tandem- or triple-axle trailer, the shackle straps will be attached to the equalizer that connects multiple springs.


To mount this spring, you will need hangers, shackle straps, and suspension bolts. If you are simply replacing a spring, you may still have hangers welded onto your trailer. You should, however, replace your shackle straps because they are usually the first component to wear out. You may choose to replace old suspension bolts as well. It is recommended that you replace the other leaf spring in your setup at the same time. Because springs can sag and elongate as they wear, this new spring may not exactly match the old one, and the alignment of your trailer could be affected.


If you are fabricating a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit that you need, you must know the specific type of leaf spring that you have, as well as your axle capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications. Hangers and other suspension components can also be purchased separately if there isn't a complete kit that works for your setup.



e66SR etrailer Double Eye Trailer Leaf Spring - 3 Leaf - 1,250-lb Capacity

Compares to SP-219275





Customer Satisfaction Score:


Customer Reviews

3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long - e66SR

Average Customer Rating:  4.7 out of 5 stars   (36 Customer Reviews)

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

by:

Replaced the old springs on my boat trailer, the old original were just barely enough for the weight of the boat, I upgraded to these and the boat rides so much better.



by:

Always very communicative customer service. Received/packed/shipped my order on a sunday(unheard of). It was delivered two days later. And that was the free standard shipping. I wish I had a need to do business with etrailer more frequently.

Etrailer Expert

Brooke M.

3/19/2024

We do too! All joking aside, thank you for the review, and we do hope to have you back soon.



by:

Service was fast,appeared to be quality .im not happy with the springs after a year.my boat and trailer weighs 4200 lbs and the rated gvwr on the trailer frame is 5000lbs.i replaced my original single leaf springs with the 3 leaf from etrailer,4 at 1250lb each should have equalled my gvwr and exceeded my boat weight.they appeared fine at first but gradually over the year they started sagging and my shackles started hitting the frame.the springs visibly flattened and lengthened causing the problem.after calling etrailer they informed me there is no warranty and nothing they can do.i think their spring rating is a bit off.im going with slightly heavier springs next time



by:

Outstanding products and staff my go to website before anyone else this particular project I ordered the wrong springs, I call etrailer expecting to eat the cost of my mistake and instead they sent me a return label for the return of my mistake and they immediately sent me the correct springs which I received in a couple days, this is why I continue to support etrailer because they support me.



by:

Good product easy to install



by:

Great product but your shipping department needs to do a better job of packing the items. 2 springs were half way out!!



by:

This set of leaf springs was excellent choice for my 4’x8’ utility trailer, handles great.



by:

Constructed well - beefy / strong



by:

The springs look like good quality and the price was good. Delivery was amazingly fast.



by:

My order shipped quickly. Exact fit.
It
took a while to figure out my exact spring I needed since they have such a huge selection!
But I called and a service representative was able to help me find the part number I needed.



by:

This order took a very long time.



by:

Everything fit and arrived on time couldn’t ask for anything more great service



by:

The customer service and knowledge I get from Shawnee is what will keep me coming back. She’s a true asset to etrailer, and the complete line of products offered (in stock) is second to none! Thank you!



by:

Exactly as described on website, fast shipping will definitely use again



by:

Fast delivery, good price, quality pr oduct



by:

Perfect



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
36
Show More Reviews

See what our Experts say about this etrailer Trailer Leaf Springs

  • Replacement Leaf Springs For An Ice Shanty Trailer
    Hey Adam, 24-5/8" is a standard sizing for 2,000lb leaf springs so the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long # e69SR is what you need. It unfortunately doesn't look like we offer a slipper spring in a higher capacity in a close enough length. You could weld on new hangers # APS4 to switch to double-eye leaf springs like the 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long # e66SR for a bit more capacity to prevent the tires from...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Hanger, Leaf Spring, and U-Bolt Kit Recommendation for Dexter Axle # 20545I-EZ-60-15
    The Dexter axle part # 20545I-EZ-60-15 is a 2,200 lb axle so for springs you'd want the 2,500 lb spring part # e66SR which is the closest we offer to a 2,200 lb axle spring. Then for a u-bolt kit you'd want the part # APUBR-10. The part # APS4 would be a great single axle kit to use as well.
    view full answer...
  • Leaf Spring Recommendation for Boat Trailer with 4,425 lb Capacity and 26 inch Long Springs
    You are on the right track for picking out springs. You would want to split the total trailer capacity in two and then go with that number when picking out springs. Our springs are rated per axle though. The closest to that would be the part # e66SR which is a 2,500 lb axle spring that measures 25-1/8 inches in length. Springs tend to stretch over time so yours being older and 26 inches would match well with this.
    view full answer...
  • Can Unique Leaf Springs be Replaced on a Very Old Trailer
    I believe the hubs are for 2,000 or 2,200 pound agricultural axles which is why the springs look so different. These hubs are designed for very low speed applications (5 to 10 miles per hour according to HADCO) so if you plan on going faster than that you will need to look at replacing the axle and hubs. You could use 2 of spring # e66SR. Each spring has a capacity of 1,250 pounds. If a new hanger kit is needed you can use # APS1. When used with spring e66SR the center to center distance...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • 2,500 lb Axle Trailer Leaf Spring Recommendation
    As long as you stay under the capacity for the springs you are fine. They are designed to be safe and reliable up to their capacity so going with heavier duty springs doesn't really gain anything. It just might give you a harsher ride quality. We have 2,500 lb axle springs as part # e66SR which would work well for you. These are 25-1/8 inches long.
    view full answer...
  • Replacement Leaf Springs For a 2006 Starcraft 2406 Pop Up Camping Trailer
    Looking at the specs for your 2006 Starcraft 2406 pop up camper it looks to have a 2,500lb axle. The only double eye leaf spring we have with that weight rating is the 3-Leaf Double-Eye Spring # e66SR which has an eye to eye measurement of 25-1/8". Since this measurement is for the spring without any weight you are best to measure from the center of the spring eye to the spring center along the radius of the spring since the spring center to spring center will get longer when weight is...
    view full answer...
  • What Should Hanger Spacing Be for Trailer Leaf Springs that Measure 25-1/8 inch
    If you have the leaf spring part # e66SR that you referenced which is 25-1/8 inches long the center to center dimension you'll need to use for the spring hangers would be 25 inches. This would be the same for the leaf spring part # e54SR you mentioned as well.
    view full answer...
  • Recommended Hanger Kit for 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8 Long
    The answer to your question will depend on your current trailer setup. If you have a single axle trailer you could use the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear # APS4. For a tandem axle trailer you could use the Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear # APT5. If you're using the # e66SR as replacement leaf springs and only need shackle bolts then you can use the # 166081. If you are planning to replace...
    view full answer...
  • Picking Out Trailer Leaf Springs for Trailer with 30 inches between Hangers
    To pick out the correct suspension components for a trailer you want to do it by most importantly picking out the springs that closely match the capacity of the axle capacity needed. That is priority one. For example if you were using the springs part # 1020, # e66SR, # e34SR, # e28SR, or # e57SR with the hanger kit part # APT5 that comes with equalizers that are 7-3/4 inches long you would want the hanger spacing to be 29-1/2 inches which is pretty close to what you have. All of these...
    view full answer...
  • Replacement Double-Eye Leaf Springs for 25-1/8 Eye Center Length
    All of our double eye leaf springs are 1-3/4" wide. If you have 1-3/4" wide springs we have the 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles # e66SR. This spring has a 25-1/8" eye center to eye center measurement and is rated for 1,250lbs per side. You will want to verify that this is the correct capacity for your trailer. I recommend using a U-Bolt Kit # APUBR-10 as often the U-bolts are damaged or severely corroded. If your springs are different from what I have recommend...
    view full answer...
  • Options for Replacing Double Eye Springs on 60 Year Old Boat Trailer
    In this case I would choose a new set of double eye springs and then weld new spring hangers accordingly. I have attached a link to our double eye springs for you. For example, you could go with the 3-Leaf Double-Eye Spring, # e66SR, which has a 1,250 lb spring capacity (2,500 lb axle capacity). Since your boat trailer is 60 years old it is very unlikely that you are going to find parts that will work without any modifications and if you were to choose to switch to slipper springs, you...
    view full answer...
  • Replacement Double Eye Leaf Springs For a 2003 Tracker Trailstar TV-18 Boat Trailer
    It sounds like you will most likely need the 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles # e66SR for your 2003 Tracker Trailstar TV-18 trailer. This leaf spring has a eye to eye center length of 25-1/8". Your spring is likely sagging a bit to give you the 25-5/8" measurement. Be sure to check the information sticker on the front of your trailer to verify this spring is the correct weight capacity as well.
    view full answer...
  • Recommended Leaf Springs and U-Bolt Kit for New Trailer Axle
    The Dexter Idler Trailer Axle w/ Hubs # 20545I-EZ-60-10 referenced in your question is a 2,200 pound axle. In order to choose the correct size leaf springs, I recommend measuing the length of your existing/previous set. For example, the 3-Leaf Double-Eye Spring # e66SR has a length of 25-1/8 inches from the center of spring eye to the center of spring eye. You will want to get as close as you can to the length of your previous leaf springs, keeping in mind that they may have stretched...
    view full answer...
  • Replacement Leaf Springs for 2015 Yetti 6x16 Fish House
    Based on measurements alone the etrailer Rust-Resistant 4-Leaf Double Eye Spring # e68SR would work as a replacement. However, the one thing you will need to find is the axle capacity on your trailer. Try checking for an axle tag to see if it is listed or if it has a serial number on it. You could also try contacting Yetti with your VIN to have them identify it. Yetti doesn't list anything about axle capacity or even GVWR for these trailers for me to take a guess. If you have a 3,500...
    view full answer...
  • Replacement Leaf Spring Recommendation for Trailer with 25-1/8 inch Springs and 2k Capacity
    Most likely the measurement is 25-1/8 inch as that is a common size. But in most cases we recommend measuring the spring with it off the trailer and typically there is a bit of stretch to old springs by around 1/2 inch or so. The spring you would want is the part # e66SR as it matches the capacity needed closely and it has a length of 25-1/8 inches like you have. When picking out leaf springs priority one is picking out the correct capacity and then finding a spring that is close to it...
    view full answer...
  • Does 3-Leaf Slipper Spring w/ Radius End Require a Bushing for Rear of Spring
    For the 3-Leaf Slipper Spring w/ Radius End # e99SR you only need the bushing on the one end, the other end will either sit over a bolt or will fit into a hanger like part # 115706S. If you have a double-eye spring on your trailer then you'll need something like the 25-1/8" Long 3-Leaf Double-Eye Spring # e66SR instead. Attached are some videos for you to check out as well.
    view full answer...
  • How To Choose Correct Replacement Leaf Springs for a C.E. Smith Boat Trailer
    In order to find the correct replacement leaf spring for a trailer you first need to start by noting the type whether that be slipper or double eye. Then, you'll need to measure their unloaded length via jacking up the trailer. If the springs are worn they will measure longer than their replacement. Lastly, you will need to note the axle capacity which is found on the tag in the center of the beam. Please note, the number of leaves does not really denote capacity as leaves have different...
    view full answer...
  • How to Determine if a 108 Triple Axle Fender Would Work with the Hanger Kit part # APTT5
    The distance between the axle centers with the # APTT5 when used with a 25-1/4 inch spring like the # e66SR will be 34 inches. You would need to compare that dimension to the dimension of the wheel centers on the fender to see if this kit would fit. Tire size will play into this as well. You will need to consider this also.
    view full answer...
  • Can 2,000 lb Trailer Leaf Springs be Replaced with 2,500 lb Leaf Springs
    You certainly can go with a 2,500 lb rated axle leaf spring on a trailer that currently have 2,000 lb capacities. It would just give you a slightly stiffer suspension setup. You should note that doing this does not give you any additional weight capacity for your trailer. The weight capacity for a trailer is determined by several things like the axle capacity, brake capacity, coupler capacity etc. The part # e66SR that you referenced would be a great 2,500 lb leaf spring. It measure 25-1/8...
    view full answer...
  • Double Eye 26 inch long 3 Leaf, Leaf Spring Availability
    The closest match that we currently have to the leaf spring that you are looking to replace is either part # e77SR which is rated for 2,000 lbs or part # e27SR which is rated for 4,500 lbs. They both are double eye leaf springs that are 26 inches long but they look like they fall outside of your weight range and they both have 4 leaf springs instead of 3. For a 2,500 lb 3-Leaf Double-Eye Spring we have part # e66SR which measures 25-1/8 inches on center. For a 3,500 lb 3-Leaf Double-Eye...
    view full answer...
  • Double-Eye Leaf Spring for a Trailer Rated for 1 Metric Ton 2,200 Pounds
    Since a metric ton is approximately 2,200 pounds you will need to go with leaf springs that are rated for at least 1,100 pounds. I recommend spring # e66SR which is rated for 1,250 pounds. With one of these springs on each side of the trailer the capacity will be 2,500 pounds. I have included a link to a video review of this spring for you and a link to our help article on double-eye suspension.
    view full answer...
  • Can a 4-Leaf Trailer Leaf Spring be Used in Place of a 3-Leaf Spring
    Yes, you can use 4-leaf springs in place of 3 leaf springs. The extra height of an additional leaf is minimal and won't really affect anything on the trailer. Provided that the springs used are replaced in pairs and not just one side of the trailer and they are the right length and capacity for the trailer you will be good to go.
    view full answer...
  • 4-Leaf or 3-Leaf Replacement Leaf Springs For Tandem Axle Boat Trailer
    It sounds like your trailer may have heaver duty axles like 3200lb or 3500lb instead of the 2500lb axles your GAWR rating implies. Based on your measurements and your current springs having 4 leaf's I recommend going with the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axle # e54SR which are still 25 1/8" long an 1 3/4" wide but have are a 4-leaf system where the 2500lb springs are 3-leaf. These springs will work even if you do have a 2500lb axle, but may be stiffer ride on the lighter...
    view full answer...
  • Broken Leaf Spring Replacement Recommendation for 23-1/8 inch 2,500 lb Axle Springs
    If you don't want to move your current hangers we have a 3,500 lb axle leaf spring part # e59SR which would fit and would work well. The ride might be a bit stiffer but it would still work well. The 2,500 lb axle springs we have are longer like the # e66SR which is 25-1/8 inches long and would require moving you hangers. You'll want to replace the springs as a pair for the axle. Since the springs would be different rating you'll want to replace all of them so they all match.
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Leaf Spring?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video by:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Manda E
Updated by:
Manda E
Employee Mike S
Written by:
Mike S
Employee Andy C
Installed by:
Andy C
Employee Kevin C
Installed by:
Kevin C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.