bing tracking image
  1. Trailer Leaf Springs
  2. etrailer
  3. Double Eye Springs
  4. 20-3/8 Inch Long
  5. 2000 lbs
  6. 3 Leaf
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long

3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long

Part Number: e84SR
In Stock
Trailer Leaf Springs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter. Great Prices for the best trailer leaf springs from etrailer. 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long part number e84SR can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (119)
  • Q & A (0)
  • Photos

etrailer Trailer Leaf Springs - e84SR

  • Double Eye Springs
  • 20-3/8 Inch Long
  • 2000 lbs
  • 3 Leaf
  • 1-3/4 Inch Wide
  • Painted
  • etrailer

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.


  • Leaf spring acts as part of your trailer's suspension system
    • Provides attachment point for your trailer's axle
  • Multiple leaves allow flexibility to absorb road shock
    • Allows for a smooth ride
    • Reduces wear and tear on trailer
    • Ensures level ride on bumpy and uneven surfaces
  • Sturdy steel construction
  • Nylon bushings included
  • Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation
    • Spring attaches to hanger mounted on trailer frame at one end
    • Other end connects to shackle straps suspended from hanger or equalizer


  • Quantity: 1 leaf spring
  • Spring capacity: 1,000 lbs
  • Axle capacity: 2,000 lbs
  • Length from center of spring eye to center of spring eye (unloaded): 20-3/8"
  • Spring width: 1-3/4"
  • Eye diameter with bushing: 9/16"
    • Eye diameter without bushing: 11/16"
  • Leaf thickness: 1/4"
  • Number of leaves: 3
  • Additional dimensions: see table

Double-Eye Spring Diagram

Part Number A B C D
e84SR 10-3/16" 11" 20-3/8" 3-3/16"

Double-Eye Leaf Spring Basics

Leaf springs, as you probably know, make up an important part of your trailer's suspension. Their main purpose is to absorb road shock as you travel, as well as allow your axle(s) to move independently of the rest of the trailer.

Double-Eye Spring Parts

To mount this leaf spring, you'll need hangers welded onto your trailer frame - which you probably already have in place - as well as shackle straps and a suspension bolt. It's a good idea to replace your existing straps and bolt while you're under there working on things because they tend to wear out quickly. One thing that could help keep them from wearing out too fast would be upgrading to galvanized or zinc-plated hardware. Doing so will boost the corrosion resistance and, therefore, the longevity of your trailer.

We also always recommend replacing both of your springs at the same time because it's not unusual for leaf springs to sag and elongate over time. If you replace just the one, there's a good chance that it won't match your existing spring on the opposite side of your trailer, and that can mess up your alignment.

e84SR etrailer Double Eye Trailer Leaf Spring - 3 Leaf - 1,000-lb Capacity

Compares to SP-169275

California residents: click here

Customer Satisfaction Score:

Customer Reviews

3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long - e84SR

Average Customer Rating:  4.8 out of 5 stars   (119 Customer Reviews)

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.


The exact match to replace a leaf spring that had broken on my raft trailer due to getting weighed down w/an incredible amount of snow 2 seasons ago. Considering the customer service I've received from as well, I won't shop anywhere else for products related to my various trailers, vehicles and boats. Thanks etrailer and thanks George J!


I wasn’t sure that is what my trailer needed until I installed them. It raised my trailer 3/4” so I knew that’s what was needed.


Would have rated higher as shipping was quick and all was right , except the nuts that were sent for the spring bolts were half inch not nine sixteenth, so had to make a trip to the hardware for the proper nuts.


Springs were exactly what I needed. Fit perfect. Had 1 issue with shipping but Customer Service was great!! Quick email to them and they had a new set of spring out for shipping the same day. Had springs 2 days later! Would def do business again.


Right size and delivered on time.



Still working fine


everything worked just as expected. the specs and info on the site were the reason I chose


Correct item, good price, good packaging, fast shipping.



No issues just like brand new


Ordering my springs was super easy on the website and the springs were delivered super fast!



It has been 1 year since installing these springs and EVERYTHING is absolutely just fine. My Pontoon trailer rides super nice now! Thanks etrailer!


Service was outstanding! Cannot rate products until they get some use. Curious to see how they stand up to the salt water here on the coast.


The springs seem fine, beefy and solid. I am disappointed in the bushings. They seem somewhat thin and may wear out soon.


Excellent product, perfect fit for my older trailer. Great customer support via phone to confirm all measurements before buying. Very happy customer!


Using the on line chat we figured out what trailer spring to use. Using measurements from my old saggy broken springs, the Chat tech recommended this spring and Nailed It! RV is back on the road and riding at the correct height. Thanks so much!


These leaf springs were just what I needed to fix my trailer and were at a reasonable price.


They had exactly what I needed at a good price and the hardware to install was presented for me making it easy to decide what I needed. Communication was great and they even improved on the shipping date. Everything lines right up and installed perfectly.


These new springs are sooo much better than the original springs. My trailer finally has the fender clearance it needs!1


Amazing service the paper and accuracy of your company sets it apart from all others. I order parts for my boat and trailer throughout the year and etrailer surpassed them all by a landslide. Y’all have a customer for life.


Your parts were quality and I’m very happy with them after using the trailer for a year! I will definitely buy from you guys again when I need something. Thanks Rick


Great value


Great job and customer service and great price Fit just right


Order took longer than expected to be delivered, but springs fit great. My trailer is back on the road. Price was good. Help on the phone with my order was great.


Finally! Service over the phone with people that know what they’re talking about. Do you know what a gym that is to find these days? I’ll say no more.


Awesome Customer Service and fitment was right on and arrived quick. 2nd time I've ordered from etrailer and will definitely use etrailer again in the future. Great Experience


Springs were as described and fit perfectly. Installing them was straightforward. The company delivered a fine product quickly and efficiently


I was very satisfied with the purchase. I highly recommend


Seems to be solidly built. Will know better after using trailer a bit

Show More Reviews

See what our Experts say about this etrailer Trailer Leaf Springs

  • Availability of 20 Inch Long 3-Leaf Leaf Spring for Small Performance Utility Trailer
    Thank you for providing that information. In addition to the length you will also want to know the capacity of your axle so you can choose the correct leaf spring replacement. Assuming this is an older leaf spring, you will also need to account for it sagging over time which will elongate the spring. For a replacement we have 2 possible options for you. The first is the 3-Leaf Double-Eye Spring # SP-072275. This is designed for 3,300 lb axles and measures 18-5/16" long. A leaf spring...
    view full answer...
  • Replacement Leaf Spring Options for a 2,000 lb Trailer Axle
    Hey Estaban, thanks for reaching out! It sounds like you're needing either the 20-3/8" Long # e84SR or the 26" Long # e77SR which are both double eye springs rated for a 2,000 lb trailer axle. You'll need to measure the center eye to center eye distance of your current leaf spring when it's unloaded (the weight of the trailer lifted off of it as well) to make sure you get the correct length. I'm not seeing an order from you with us here at, but if you can get me your order...
    view full answer...
  • Replacement Leaf Springs, Shackles and Equalizers for 2012 Koala 21CS
    For a replacement leaf spring the part # e84SR would work great as this is a 2,000 lb axle leaf spring with exact dimension you have of 2-3/8 inches. For replacement shackles we have the part # TRSL313 which is the size you need of 3-1/8 inches. For wet bolts you'd want the part # 126B2 and then for cushioned equalizers you could use the part # LC279687.
    view full answer...
  • Replacement Double Eye Leaf Spring For a Trailer with 21-3/4" Eye To Eye Measurement
    I see you were looking at the 3-Leaf Double-Eye Spring # e84SR for 2,000lb trailer axles. This spring has an eye to eye measurement of 20-3/8" when fully relaxed and will extend all the way to 22" when the spring flattens out due to weight. If you are measuring worn out springs that are nearly flat this may be the correct spring for your trailer. Our next largest spring is currently the 23-1/8" Spring # e59SR which is rated for a 3,500lb trailer axle.
    view full answer...
  • Replacement Leaf Springs for Trailer with 2,000 lb Tandem Axles
    Yes, since your trailer is a tandem axle setup the 2,000 lb rated trailer leaf springs part # e84SR would be correct for you as you'd have a total of 4,000 lb total axle capacity.
    view full answer...
  • Leaf Spring Replacement for 21-1/2 Spring on 2001 StarCraft Camper
    Is the 21-1/2" measurement with the trailer still loaded or is that with the frame of the trailer jacked up so the spring is in a natural position? The 3-leaf spring # e84SR might work as it measures 20-3/8" center eye to center eye and it's rated for 2,000 lbs. If the weight rating and length works out for you then this being 3-leaf springs as opposed to 4-leaf springs will still work out since you're supposed to change out leaf springs in pairs (for each side of the axle). Attached is...
    view full answer...
  • Where to Measure to Replace Trailer Leaf Springs if All are Broken
    Can you get me the distance between the hangers of the trailer suspension as well as the capacity of the axle on the trailer? With that we can get you the correct size and capacity spring.
    view full answer...
  • Comparing the Single-Axle Trailer Hanger Kits for Double-Eye Springs APS1, APS2, and APS3
    When choosing between the Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS1, part # APS2, and part # APS3 it will be best to use the one that has measurements that most closely resemble what is already on your trailer. For example, if your rear leaf spring hangers are 7/8" tall or shorter than you would want to use part # APS1 but if they are taller then this you would want to use part # APS2 or part # APS3. The only difference between the two latter kits is that part #...
    view full answer...
  • Replacement Hanger and Leaf Spring Recommendations for 1996 Lowe 170 Boat Trailer
    For a single axle trailer you want the leaf spring to be a little longer than the eye to eye measurement. Since all of our options are either a little below or a bit more than the 21" distance you measured I recommend cutting off the old hangers and having new ones welded on - this isn't uncommon for older trailers since they used parts that weren't part of a standardized setup. Here are the parts I recommend for your 1996 Lowe 170 boat trailer: - Single-Axle Trailer Hanger Kit for Double-Eye...
    view full answer...
  • Hanger Kit Recommendation for Leaf Spring e84SR
    If your trailer is a single axle the hanger kit part # APS4 will work great with the leaf spring part # e84SR. Or if you have a tandem axle trailer you'd want the part # APT5. The picture I attached shows the tandem axle kit installed on a trailer.
    view full answer...
    Image 1 for
  • Leaf Spring For 2,000 lb Trailer Axle That is 20-3/8 Inches Long
    We do have the SP-169275 leaf spring, which is a 20-3/8" long leaf spring for 2,000 lb axles. We have it as a different part number but is exactly the same thing, and what you are looking for is the following: - 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long # e84SR
    view full answer...
  • Weight of Leaf Spring e84SR
    The Leaf Spring # e84SR that you referenced weighs 5 lbs.
    view full answer...
  • 20 3/8 Eye to Eye 3-Leaf Double-Eye Springs
    We have a leaf spring that matches your dimensions it is the 3-Leaf Double-Eye Spring item # e84SR. These springs have a 1,000 lbs capacity each and are for 2,000 lbs axles. This 1-3/4" wide spring has 3 leafs and it has a 9/16" eye diameter with bushing.
    view full answer...
  • Determining Hanger Spacing for Replacement Leaf Springs on Trailer
    The closest leaf spring set we have available to the 22-1/4 inch length you mentioned is the 3-Leaf Double-Eye Spring # SP-113275. This double-eye leaf spring features a length of 23-1/2 inches from the center of the spring eye to the center of the other spring eye. I recommend making sure you are measuring your existing leaf spring from the center of one eye to the center of the other. This particular set is designed for 2,000 pound axles, so you will want to also make sure any new springs...
    view full answer...
  • Replacement Components To Upgrade Harbor Freight Folding Trailer
    The Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs # 20440I-EZ-60 will be a great upgrade from the axle that comes on Harbor Freight trailers. The 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8inch Long # e84SR and hanger kit # APS2 will work well as will the u-bolts # CE23000. The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C # AM30630 is rated for 990 lbs each max capacity, so you will...
    view full answer...
  • How is a Double-Eye Trailer Leaf Spring Length Measured
    When measuring double-eye leaf springs you will need to have the weight off of the springs by either taking the springs off or you could jack up one side of the trailer. Then you would measure from the center of one eye straight across to the center of the other eye. Depending on how old and worn the springs are you may not see an exact match in terms of dimensions out of the new spring options. Spring # e84SR for example measures 20-3/8 inches from eye center to eye center. I have included...
    view full answer...
  • Leaf Spring Replacement and How to Find the Correct Measurements
    I'll be glad to help you find the correct set of leaf springs for your trailer but I am going to need some more information. This is a common problem because springs like to flatten out as they wear. The best way to get an accurate measurement is to jack the trailer up so that the axles hang free. Then measure straight across the springs from the center of one eye to the center of the other eye on each spring. This will give you a close enough measurement, within 1-2 inches, that you will...
    view full answer...
  • Availability of Trailer Leaf Spring With 20-1/2 Eye to Eye Dimension
    If the trailer has a 2000 lb capacity axle, and the eye to eye distance was measured when the trailer was jacked up so that the axle hung freely, the # e53SR or # e84SR would meet the criteria you mentioned.
    view full answer...
  • How To Choose the Correct Replacement Leaf Spring for Old Boat Trailer with No Axle Capacity
    The weight capacity of the leaf spring should be based off the weight capacity of the axle. If you cannot find a sticker on the axle that lists the weight capacity then you can go off of the cargo weight. If the cargo weighs around 1,360 lbs I would go with a 2,000 lb spring capacity which is pretty common for smaller boat trailers. I have attached for you below a list of these options which will vary by the unloaded eye to eye length. The 3-Leaf Double-Eye Spring part # e84SR is our most...
    view full answer...
  • Recommended Leaf Springs for 1200 lb Trailer
    For your 1200 lb trailer capacity, I recommend the 2000 lb leaf springs like # e84SR. These will have a 1000 lb capacity each. These come in different lengths, so I have attached the options for you in a link. If you have slipper springs instead of double eye springs, then the 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long # e29SR are the only option we have that won't give you too rigid a ride on your trailer.
    view full answer...
  • Which Leaf Springs and Hangers Are Needed For 2000lb Trailer Axle e84YR?
    I would be happy to piece a kit together for you, but there are not any leaf spring kits designed for axles such as the Trailer Axle With Idler Hubs # e84YR you were looking at. You will need the Single-Axle Trailer Hanger Kit # APS4 with 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles # e84SR and U-bolt kit # CE23000 to secure the axles to the leaf springs. The hangers will get welded to the trailer frame around 20" apart from center to center of the mounting holes, and you will...
    view full answer...
  • Recommended Suspension Kit and Leaf Springs for Tandem Axle Trailer with 4.80x12 Tires
    For your tandem axle trailer with 12 inch wheels, you will want to use the Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-3/4" Tall Front/Center/Rear # APT5. The spacing of the tires/axles will depend on the load capacity of your axles. With the 4.80-12 tires like # TA98RR, your axles could be rated for 2,000 lbs, 2,200 lbs, or 3,500 lbs. If your axles are 2,000 or 2,200 lbs capacity, then you will space your axles 29-1/2 inches on center and use the 3-Leaf Double-Eye Spring...
    view full answer...
    Image 1 for Image 2 for
  • How To Convert Slipper Springs to Double Eye Springs on a 2007 Carnai TFS Trailer
    The leaf spring hangers you have on 2007 Carnai TFS Trailer are for slipper springs and I am not aware of a way to convert them to double eye leaf springs. In order to install double eye leaf springs on your trailer you would need to remove the hangers you have now and install the Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS4. Once the new hangers are installed you could then add the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles part # e84SR (2) to complete your...
    view full answer...
    Image 1 for
  • Shipping Weight of Dexter Trailer Axle T20BTR-EZ-7258
    Dexter Trailer Axle # T20BTR-EZ-7258 has a shipping weight 22-lbs. Its actual rated weight-carrying capacity is 2200-lbs. It could be used with leaf springs such as # e84SR, a pair of which is rated for 2000-lbs.
    view full answer...

< Previous
123. . .6

Do you have a question about this Trailer Leaf Spring?

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Kevin C
Installed by:
Kevin C
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video by:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Manda E
Updated by:
Manda E
Employee Ryan F
Updated by:
Ryan F
Employee Mike S
Written by:
Mike S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.