Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hanger bracket secures the eye end of a slipper spring on your aluminum or steel trailer's suspension. It is constructed of corrosion-resistant galvanized steel and accepts a 9/16" shackle bolt.
Features:
Specs:
Install a new suspension without the hassle of welding a hanger to the bottom of your trailer. Bolt-on design attaches to the bottom of your trailer frame and provides a mounting hole for the 3" long shackle bolt that goes through the eye of your slipper spring.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
California residents: click here
Looks great. Hope it lines up properly
Product was exactly what I ordered.
Perfect fit. The metal was thicker than I expected. I am very satisfied. We installed them the next day. Shipped and arrived as promised.
Product looked good. Shipping was delayed a couple of times.
I used these 'front' brackets for both front and rear ends of my leaf springs, because I couldn't find a bolt-on rear bracket. I had to bend 1/4" offsets into each of my rear shackles to make the rear brackets work. I added a spacer between my shackles to keep them perpendicular. The original rear clip was 1-3/4" wide on the outside and the shackles were outside the clips. I used 3/8" bolts to attach the brackets to my 3"x1-1/2" steel tube trailer frame. The bracket mounting tabs are drilled for 7/16" bolts, and I would have preferred to use 7/16" bolts, but I couldn't find that size at my local hardware stores. I moved my axle forward to rebalance my boat trailer, because I put a smaller engine on which made tongue weight way too heavy. I went with bolt-on brackets because I could do it myself (I don't have welding equipment). Overall, I'm satsified.
Awesome product. great delivery service... Product will be used to hang thr leafsprings on my boat trailer.
I' M VERY HAPPY WITH ALL THE PARTS I RECIEVED , AND THE PROMPT SHIPPING AND FOLLOW UP IS APPRECIATED.
THIS LITTLE PROJECT IS FOR A SMALL TRAILER I HAD PRETTY MUCH LET RUN DOWN AND AFRAID TO GET OUT ON THE INTERSTATE WITH.
THE NEED FOR ME TO BECOME SANTA AND TAKE A LOAD OF GRANDKID PRESENTS TO NASH TN PUT ME IN A BIND TO GET THE TRL FIXED ASAP.
YOU GOT ME FIXED UP AND I WILL ORDERING FROM YOU.
I HAVE TWO CAR HAULERS AND A FLAT BED SO I NEED STUFF REGULARLY.
THANKS AGAIN , MERRY CHRISTMAS
DO YOU GUYS SELL TRAILERS ? I'M GOING TO WANT A 12FT X6FT TANDEM CARGO, ODD SIZE, BUT IT WILL BE A PARTS TRAILER . NO WHEEL WELLS INSIDE . WE MOVE OLD CAR PARTS AS WELL AS MESS WITH VINTAGE CARS.
bracket worked well although it seems like the 9/16 hole is slightly larger on one side than the other making a tight fit with the bolt I purchased causing it to only go in the bracket from one side... not a problem but if you want to have both sides of the trailer with bolt and nut on same side of the bracket you might want to dry install before securing the bracket onto the frame to know which way to install the bracket
Bolt-On spring hangers can't be bought for love or money in any "Brick & Mortar" store in Atlanta. I tried. Etrailer had just the thing with the CE14016G and it's slip-spring sister the CE14017G. I appreciated the feature that I had choice of bolting through the single 1/2 in bolt hole in the center, or the smaller two on the the tabs. It sure beat looking for a welder or bumming an industrial drill press to put holes in the regular hangers. Etrailer did a timely job of shipping on time. The new springs are hung, and I'm looking forward to pulling my boat out of the water.
I rebuilt a small utility trailer. The axle was a little too far forward for me. I used these in case I didn’t like the position. I left the original hangers in place in case I wanted to change the axle back. I haven’t moved it back because the new position balances the trailer just right.
The brackets I ordered from etrailer are high quality and will work perfectly for my application. I received my order quickly and am very pleased.
Thanks etrailer!!!
Work as spected
All Parts for trailer suspension fit perfectly. Shipping was lightening fast. Excellent products and service.
Easy to find product, order and get it delivered.
Replaced the entire suspension system for my small boat trailer.
Great price AND fast customer service!
I will shop here again!!!
I love your quick shipping and follow-up. You have always shipped my purchases on the same day I ordered and promptly gave me tracking info.
Thanks!
really great fitting to accommodate and repair older trailer
Still hanging there after a year! No problem.
Seriously, these brackets worked perfectly.
This is my second order, perfect! Rebecca was a tremendous help with the details and the order was shipped the same day even after placing the order late in the day. All the item ordered were excellent quality wise as well! Thanks
This is my 3rd order from etrailer - Excellent service
Thank you,
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
12/12/2017
Ron, The largest utility trailer we sell at this time is the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. The bed dimensions are 88 inches long x 52 inches wide x 24 inches tall and has a 1.640 lb payload capacity. I hope this helps. I have attached a link for your reference. Thank you.
Helpful Links
Trailers/Detail-K2/K2MMT5X7.html