Recommended Bolt On Hangers For Aluminum Frame Trailer

Updated 05/08/2020 | Published 05/05/2020

Products Featured in This Question

4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long

(2331)

$52.97

Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long

(574)

$15.10

CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1

(53)

$14.67

CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1

(64)

$19.10

CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc

(1073)

$45.00

Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter

(657)

$16.35

Question:

I am looking for a bolt on spring hanger kit for a aluminum trailer. The frame is being made out of aluminum box tube . I am going to use a 3000lb axle kit.

asked by: Jeremy S

Expert Reply:

Since you've got an aluminum frame trailer, I understand why you're looking for a bolt on solution. The only available bolt on hangers we have available would be the # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # e77SR you were looking at. If you went this route you would want to use something like the # SP-040275 as your springs, which have a 3700-lbs capacity.

This would be the best solution available for your new aluminum trailer, but you'll also need some other parts to finish everything up. For an axle mounting kit you can use the # CE23002 and spring seat # TRSS238, which are designed for 2-3/8" diameter axles. If you also need suspension bolts you can use the # 166079.

I've linked some helpful videos on these parts that you may want to have a look at, as well.