Replacing Hangers with 3 Mounting Holes on a 1990 Escort Boat Trailer  

The mounting holes of the part #CE14017G and #CE140116G that you referenced are 7/16 inches in diameter. You would need to get bolts that would fit those hole sizes. Since applications can vary there isn't a set bolt size you would need. Your…

The Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole #E4139 is a weld on application. It hasn't been tested for bolt on installations, so I can't confirm it will hold up if you drilled it and bolted it…

I recommend using the 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long Item #SP-040275, for your trailer leaf springs that are 28.5 from center of bolt to center of bolt with 3,000 lbs trailer. You will need a slipper…

The top holes you see in trailer suspension hangers such as Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear Item #APS3 are for button welds and not bolts so these hangers should not be bolts on. The problem…

The only difference between the Flat and Radius end slipper springs is the shape of the end of the spring with the radius having an arch and the flat being flat as you can see in the included pictures of the Radius End #SP-179275 and Flat End #e29SR.…

We unfortunately do not have exactly the spring you are looking for. What I recommend is getting the 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long #SP-178275 and moving your rear hanger forward because you will be…

The difference is found in the application. The Slipper Spring styles, like part #SP-179275, are intended for use with more heavy duty applications, while the Double Eye styles, like part #e77SR are used to provide a more comfortable ride. The part…

There really is not any type of quality difference between the two slipper springs: - 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long #e99SR & #SP-178275 They both have the same measurements, steel construction,…

You could pretty easily install the springs you have but you will need to use a single axle trailer hanger kit like part #APS4 as the bushing sizes and hangers you have now won't work with the spring you have part #SP-113275.

The 3-Leaf Slipper Spring w/ Radius End #e99SR comes with one single spring. You will have to purchase two to complete the axle. This spring has a measurement of 24-5/8 inches from center of spring eye to center of spring eye. The spring is for a…

The size of bolts for the CE Smith Front Hanger Bracket, part #CE14016G, are as follows: The 2 top holes on the ends take 7/16" diameter bolts. The center top hole takes 1/2" in diameter bolts. The lower spring eye holes take 9/16"…

The top mounting holes on the CE Smith Front Hanger Bracket #CE14016G are as follows: The 2 top holes on the ends are 7/16 inches in diameter The center top hole is 1/2 inch in diameter The lower spring eye holes are 9/16 inch diameter I have…