Could Shackle Bolt # 166081 be Used with CE Smith Suspension Hanger # CE14016G
Updated 02/05/2024 | Published 02/04/2024
Products Featured in This Question
Question:
For ce14016G e29sr I think it needs 166081, not 166079 like your description suggests. 3 or 3.5? Other?
asked by: George
0
Expert Reply:
The 3 inch shackle bolt part # 166081 would be a great option to use with the CE Smith suspension hanger part # CE14016G. This would be a better fitting size than going with the longer 3.5 inch bolt you mentioned.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Snowmobile Trailer
- Slipper Springs - 1-3/4 Inch
- 9/16 Inch Diameter
- 2-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- CE Smith
more information >
Continue Researching
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Q&A: Should Trailer Leaf Springs Have Shackles on Front and Back
- Q&A: Gooseneck Pin Box for 2023 Keystone Montana 3231CK
- Q&A: Troubleshooting Slanted Equalizer on Unloaded 7K Cargo Trailer
- Q&A: What Size Axles Are Used With the Timken Bearing Kit TMK96ZR
- Q&A: Cross Reference a Replacement for a TCM 21334 TB Grease Seal
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Can MORryde X-Factor and Roadmaster Comfort Ride Systems be Installed Together?
- Q&A: MORryde X-Factor Crossmember Fit for Standard Frame Hangers with Correct Track
- Article: Double-Eye Trailer Suspension System Review
- Article: Slipper Spring Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing