bing tracking image
  1. Trailer Suspension Parts
  2. Redline
  3. Hangers
  4. Boat Trailer
  5. Camper
  6. Car Hauler
  7. Snowmobile Trailer
  8. Utility Trailer
Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
Redline

Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole

Part Number: E4139
In Stock
$32.26
Trailer Suspension Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Hanger can be configured to work in the front, rear or center position to suspend your double-eye leaf spring or equalizer. Great Prices for the best trailer suspension parts from Redline. Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole part number E4139 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (135)
  • Q & A (0)
  • Videos (1)
  • Photos

Redline Trailer Suspension Parts - E4139

  • Hangers
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Double Eye Springs
  • 4-1/4 Inch Tall
  • Single Axle
  • Tandem Axle
  • Triple Axle
  • 9/16 Inch Diameter
  • Redline

Hanger can be configured to work in the front, rear or center position to suspend your double-eye leaf spring or equalizer.


Features:

  • Configured for use as front, center or rear hanger
    • Used as a rear hanger only in tandem and triple axle setups
  • Provides attachment point for leaf springs
    • Hanger suspends spring or equalizer from trailer frame
  • Fits 1-3/4" wide double-eye springs with 9/16" diameter eyes
  • Outside width of hanger is 2-5/16"
  • Works with 9/16" diameter bolt (sold separately)
  • Thickness of metal: 3/16"


Hanger Diagram



E4139 Front, Center or Rear Hanger for Double Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole





Video of Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Redline Trailer Suspension - Leaf Spring Suspension - E4139 Review

Today, we're going to be taking a look at the front, center, or rear hanger, for double-eye springs. This hanger can be used as a front hanger on single axle applications, and it can be used as a front, center, or rear hanger, on tandem or triple axle applications. It's going to fit 1 3/4" wide double-eye springs with 9/16" diameter eyes. It does work with a 9/16" diameter bolt, hardware sold separately. The unit's made from a sturdy steel construction. It measures around 3/16" thick.

It is a weld-on application, so this will weld directly to the trailer frame. The height measurement for a hanger is taken from the center of the mount hold to the top of the hanger. The height for this particular one is going to give us a measurement of about 4 1/4". The overall length, looking at about 3". External width is about 2 5/6" to 2 3/8".

Internal width, it's going to measure about 1 7/8 to 1 15/16", and then the overall height of the unit, that's going to measure about 4 7/8" tall. Then the holes on the unit, again, have that diameter of 9/16". That's going to do it for today's look at the front, center, or rear hanger, for double-eye springs.

Customer Satisfaction Score:


Customer Reviews

Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole - E4139

Average Customer Rating:  4.9 out of 5 stars   (135 Customer Reviews)

Hanger can be configured to work in the front, rear or center position to suspend your double-eye leaf spring or equalizer.

by:

My order was supposed to arrive on Saturday by Monday evening I had not received it I called the lady was very apologetic and said she would research it. She took care of everything and it was here. They were very helpful .!! the part was exactly what I needed Would definitely recommend them for their personnel and their follow up



by:

These were purchased to assist with raising a dual-axle travel trailer. They arrived well packaged, and looked to be well made.They took readily to welding, so there was no issue with inferior material. The attached images show them being welded side-by-side to the frame rail extensions, then the entire assembly attached to the main frame.

Nathan

4/26/2021

After a year and more than six thousand miles under our 30 foot fifth-wheel, these show no sign of degradation. At this point, Ive quit worrying about them, and just keep rolling. Thanks, etrailer!



by:

Exactly what i needed. Same dimensions as the original. Might have even been a little thicker gage metal than my originals. I added angle gussets to all my hangers to hopefully keep them from breaking again.



by:

Exactly what I needed and arrived sooner than expected.



by:

Perfect fit, exactly what you have advertised. Very pleased, thank you Ralph



by:

I think these guys know their trailers



by:

Trailer Doesn't Have broken springs anymore. Fun stuff! Good product, fit properly, no complaints.



by:

The were very helpful in helping me order the correct hanger. Shipment was very fast.



by:

Just what I needed



by:

Great place to deal with, fast shipping, extensive emails, and they have the product. need this extra long spring hanger and they were the only ones I could find that had it. Rebuilding a tow behind dump trailer.



by:

Product quality was as expected but the customer service was the part that brings me back! Great job and thank you!



by:

When I disassembled my springs and shackles to replace the worn items I discovered my hangers were not worn at all. I completed my rebuild of the suspension and had some welding done on the frame that Terry did not complete back in 1996. I ended up using the hangers as barter for a portion of the frame rework.
The suspension parts I used from you folks fit and worked as expected and we took our 1996Tterry 5W to Texas this spring and had a good time.
Thank You,
Jim Ferry
Thornville, Ohio



by:

Parked in the middle of the Mojave desert I noticed that the wheels and tires
on one side of my old Crusader travel trailer were quite close together, within
about two inches of touching each other. On further inspection the welds on the
rear axle spring hanger had failed, leaving 2, 5" pieces of strap steel hanging on
the leaf spring. Was trying to figure out a fix without calling a mobile welding
outfit, when I entered "travel trailer spring shackle" on my Verizon tablet, and
There you and the exact piece of steel I needed were. Had no idea that it was
Such a common part. Cleaned up the frame with a grinder and drilled two
Holes. Two grade 8 nuts, bolts and lock washers. Saved about 15 times the
Cost of the part and shipping. Bravo!!



by:

Perfect match, and the info on the website helped me get the spacing right (factory hangers weren't welded on right so the springs were always cocked)

Jeffrey

4/3/2014

Hi Patrick, still happy as a clam with my order. I took an old camper trailer frame and cut it down to make a canoe kayak trailer. Your info on the web site and parts helped A LOT. We have used the trailer several times. Good stuff. I have 5 trailers, yall are my go to place for parts.



by:

Thank you for all the help on the phone to get the right bracket hanger.

Darron M.

10/25/2020

Product has preformed well no issues



by:

Perfect fit, we’ll made!



by:

It was just what I needed. Installation was typical. This part replaced a broken one on a fifth wheel trailer. Shipping was great!



by:

Everything arrived in a timely manner and was well-packaged.
My only disappointment was not being able to purchase 4-1/4" front hanger brackets in a kit. I was forced to purchase the kit with 3-1/4" brackets and order the 4-1/4" brackets separately.



by:

The hanger on my trailer was separating from frame. After torching off the old hanger, welding in a support plate- this was a simple replacement. Still holding up well 1 year later.



by:

The products I ordered came extremely well packed in one large box. The spring hangers look to be in good condition and ready for welding, and the wet bolt kit for Morryde came with excellent instructions. Shipping was quick arriving at my house sooner than expected.



by:

Good quality



by:

Got exactly what I needed at a good price and fast. Will shop here again!



by:

I purchased two of these to replace the hangers that broke on my 5th wheel. The are exact replacements for the originals.



by:

The product itself is excellent, unfortunately somewhere the incorrect label was placed on 2 inch wide spring hangers and the correct appllicationfor the part number is 1-3/4". E-trailer is correcting and providing a shipping label to return the others. Slight delay but sometimes that stuff happens. No worries. The free shipping on $150 orders make up for a lot on heavy parts.



by:

Perfect fit and no one else had this specific size needed to match my trailer. I would purchase again if the other side breaks an ear off (let's hope not)


25
135
Show More Reviews

See what our Experts say about this Redline Trailer Suspension Parts

  • 4-1/4 Inch Tall Hanger Needed for 1-3/4 Inch Wide Double Eye Leaf Springs
    We sure do! What you're looking for is the Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall # E4139 which is designed for 1-3/4" wide springs and the standard 9/16" diameter bolt. Attached is a review video for you to check out.
    view full answer...
  • Outside Width Dimension of the Redline Trailer Hanger # E4139
    I went out into our warehouse and pulled a Front/Center/Rear Hanger for Double-Eye Springs, part # E4139, and measured the outside width of it. It measures 2-5/16 inches from the outside of one side of the # E4139 to the other side. Check out the picture to the right to see this measurement.
    view full answer...
    Image 1 for
  • Can Equa-Flex Equalizers Add Height
    Possibly a bit; it just depends on the height of your current equalizers. The Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K # LC279688 measure 4 inches tall from bottom to top bolt hole, so if you use the same shackle straps and that is quite a bit taller than your equalizer you will add some height. It won't be much though, so if you don't want to add an over/under kit then the next best thing to do is to replace your hangers with taller ones, which can...
    view full answer...
  • How To Fix Tires Hitting Fenders After Installing New Dexter E-Z Flex Equalizers
    To get your Dexter E-Z Flex Equalizer lower so the tires on your 2-17 Nitro Z19 boat trailer are not hitting the fenders I recommend having taller center hangers installed. Base on the pictures you provided it looks like your current hangers are pretty short. You will want to measure from the frame to the center of the hole in the hanger, and then use one of the options mentioned below as a replacement to get the clearance back. The available options are the 3-1/4" tall # 28-5, 3-5/8"...
    view full answer...
    Image 1 for Image 2 for
  • Can the Center Spring Hanger Be Taller Than Front and Rear Spring Hangers On Magic Tilt Trailer
    It is possible to have a center spring hanger that will be longer than the front and rear hangers. For an example I would have the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs, part # APT3HD. This kit has 2-1/2 inch tall front and rear hangers and a 5-7/16 inch tall center hanger. A longer center spring hanger is normally used in conjunction with an equalizer. The equalizers are designed to transfer the load from one axle to another when the trailer goes over a bump. I am including...
    view full answer...
  • Axle Weight Capacity of Front/Center/Rear Hanger for Double-Eye Springs E4319
    I reached out to our contact at Redline and he informed me that the Front/Center/Rear Hanger # E4139 is rated for axles ratings up to 7,000lbs. So you will be able to use these on your 2019 Grand Design Reflection 5th wheel.
    view full answer...
  • Will Increasing The Air Presure In Air Springs On Lippert Center Point Increase Suspension Lift?
    The 2" gained in trailer height comes from the height of the Lippert Center Point # LC1565391 itself. Increasing the air pressure will not gain any significant height as the air spring uses a lever type design which only moves the lower mount a small amount. Also as the spring was designed for a 5" width between the plates when installed the springs themselves will not extend much beyond that point. If you wish for more height you might consider installing some taller Hangers # E4139....
    view full answer...
  • What is Bolt Hole Diameter for Suspension Hanger # E4139
    The standard diameter for trailer leaf spring bolts is 9/16 inch which is why the part # E4139 and all similar options have this hole size. We don't have anything with a smaller diameter but my guess is what you have is actually 9/16 inch.
    view full answer...
  • What is the Inside Width of Trailer Leaf Spring Hanger E4139
    If the outside width of hanger # E4139 is 2-5/16 inches and the metal thickness is 3/16 of an inch then you would take 2-5/16 and subtract 3/16, and then subtract another 3/16, to get 1-15/16 inches. It is meant to be used with leaf springs that are 1-3/4 inches wide. I made a picture showing these measurements for you.
    view full answer...
    Image 1 for
  • Recommend Hangers, Shackle Straps, and Bolts for Equa-Flex Cushioned Equalizers # LC279688
    For a center hanger you will want something that isn't too tall because equalizers # LC279688 are quite tall compared to regular equalizers. Hanger # 115918 is what I would go with. The front and rear hangers would need to be taller than the center so I recommend # E4139. Then for shackle straps I recommend # TRSL313. This should get you right about level. So you will need: 2 of hanger # 115918 4 of hanger # E4139 8 of shackle strap # TRSL313 14 of wet bolt and nut # 126B2 The Equa-Flex...
    view full answer...
  • Recommendations for Raising Trailer to Add Clearance for Larger Wheels
    I do have a few possible options for giving your 2004 Toy Hauler some extra clearance for your larger 29-1/4 inch tires. Replacing the Double-Eye Springs and upgrading to a 5 leaf or 6 leaf spring system will provide very minimal rise on your trailer and may not even be noticeable, especially when the trailer is loaded. Additionally, installing overrated springs will create a rough ride as you mentioned but also put extra stress on different components of your trailer when traveling on...
    view full answer...
    Image 1 for
  • Spring Hanger Kit Availability
    There is no one way to set up your spring hangars. It depends on the manufacturer on how they set them up. If your are shorter on the end of the spring eye and longer on the equalizer connection then you can measure them and order exact replacements. We sell these as kits like theTandem-Axle Trailer Hanger Kit for Double-Eye Springs part # APT3 which I think matches yours from your description and also individually like the Front/Center/Rear Hanger for Double-Eye Springs part # E4139 allowing...
    view full answer...
  • Ways To Increase Ground Clearance On a Fun Finder 189FB Travel Trailer
    As you have already done an Over-Under Conversion Kit # K71-384-00 on your Fun Finder 189FB there is a couple more ways that you can get some more height from your suspension. First you can look at using taller spring hangers. I was unable to get any dimensions for your current hangers but we do have the Front/Center/Rear Hanger for Double-Eye Springs # E4139 that is 4-1/4" from the top of the hanger to the center of the spring bolt hole. You can also look at the Lippert Center Point...
    view full answer...
  • Picking Out the Correct Leaf Spring and Spring Hanger Replacements for a Homemade 6x8 Flat Trailer
    For a 1,750-lbs leaf spring the closest we carry to what you're needing is the 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles # e59SR. This spring measures 23-1/8" unloaded, is 1-3/4" wide, and has 3/8" thick leaves. Also, to pick out the correct replacement spring hanger # E4139 you're just going to need to measure the inside width and length from top to center of mounting hole on your current hangers. Most of the time, double-eye leaf spring hangers will measure 1-3/4" wide so...
    view full answer...
    Image 1 for
  • Redline Hangers for Raising the Height of 5th Wheel Camper
    The tallest spring hangers we have in a 9/16 eye diameter are the Redline item # E4139 you were looking at. If you want to go to the 5 7/16 inch hanger you were referencing you will need to upgrade to 3/4 eye diameter leaf springs. If you decide to upgrade your leaf springs to use the taller hanger please email me and I would be happy to make a recommendation.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Can I Change Out Longer Hangars and Short Equalizers for Longer Ones to Gain Fender Clearance
    Since you have only moved things ever so slightly using a longer hanger like the Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall part # E4139 will give you the desired effect and give you the clearance you need. You will want to use one at each connection point so at the end of each spring and above the equalizer.
    view full answer...
  • Recommended Ways To Lift 2008 StarCraft Centennial Trailer
    Since you have a torsion axle you can use spacer blocks to get more ground clearance. There are lift kits available if you have Dexter axles. Normally, people use 2 inch by 3 inch, or 2 inch by 4 inch steel tubing with 3/16 or 1/4 inch wall thickness. Raising the trailer will change the geometry of your trailer making it more top heavy and you may have more trailer sway. If you have leaf springs on your trailer you can add longer hangers. You would need to cut off the old ones and have...
    view full answer...
  • Can 2" Square Axle on Cattle Trailer Be Flipped
    We don't have a full kit, but you can use the CE Smith U-Bolt Kit # CE23103. You will also need to cut off your spring seats and weld on the old ones or new ones to the top assuming your axle uses them. Spring seats for a 2" square axle are not something that we carry. Alternatively, you may need to drill a hole if that is what you have now instead of spring seats. It all depends on your current setup since it varies on square axles. Adding taller hangers like the # E4139 you looked at...
    view full answer...
  • Lift Kit Adding 2" For 1-3/4" Square Axle 5x8 Trailer.
    With square axles, neither of our over/under kits will be a fit to raise the height of the trailer so another option is to use longer hangers for the leaf springs. You will just want to confirm the hangar height. You may be able to use a hanger like part # E4139. This hanger is designed for double-eye springs and is 4-1/4 inches tall. The old hangers will need to be cut off and the replacement hangers welded on by a professional.
    view full answer...
    Image 1 for
  • How To Lift Trailer with 3-1/2 Diameter 8k Axle With Center Point Suspension Already Installed
    You can lift your 2009 Mobile Suites 5th Wheel trailer, but since you have 8000-lbs Dexter Axles that are 3-1/2" diameter, the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00 will not work since they are only designed for 3" diameter axles. It's also worth noting that the Lippert Components Center Point Suspension Upgrade # LC1565391 already raises your trailer approximately 2". You could add the Tandem Axle Lift Kit # RR23QX which will add approximately 2-1/4" of lift to...
    view full answer...
  • How Thick is the MORryde Rubber Equalizers # MR87ZR Where it Fits Into The Center Hanger?
    The top of the MORryde Rubber Equalizers # MR87ZR is 1-3/4" thick to fit inside a standard Center Hanger # E4139 which is used on double eye leaf springs.
    view full answer...
  • Can Taller Trailer Suspension Equalizer Increase Trailer's Ride Height
    You could do that, but in order to get the height increase, you'll also need to go with taller front and rear spring hangers. For instance, if your current equalizers are 2 inches high, and you switch to the # TREQ310 equalizer which would add two inches, you'd also need a 2 inch taller spring hanger, such as # E4139. If you don't raise the height all the way across the board, the trailer could handle poorly and be more susceptible to sway. If the trailer has a 2-3/8 or a 3 inch diameter...
    view full answer...
  • Tallest Front and Rear Double Eye Leaf Spring Hanger For Trailer
    The tallest front and rear hanger we currently offer is the Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole # E4139 which is only 4-1/4" tall from the center of the bolt hole to the top of the hanger as shown in the included diagram. This will still work with your current suspension, though it may very slightly lower the trailer. It is always recommend to have a professional welder weld the hangers to the frame to make sure they are secure. I included...
    view full answer...
    Image 1 for Image 2 for
  • Will Taller Hangers Lift My Keystone Travel Trailer
    The Hanger part # 115918 is going to lift your trailer, how much depends on the hangers that you currently have on the trailer. The difference between the height of your current hangers and these will be how much lift you get on the Keystone. We do carry taller hangers like part # E4139 that measures 4-1/4" tall. Another option for a lift is an over-under kit like part # K71-384-00 for a 2-3/8" axle or part # K71-385-00 for a 3" axle. You are basically moving the springs to on top of the...
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.