Hanger Compatibility For Bolt-On Application On 2016 Tracker Trailer
Updated 04/05/2017 | Published 04/04/2017
Products Featured in This Question
Question:
Can this be bolted on or do I need to weld it? I would prefer to bolt them on if possible I bent a shackle on my 2016 Tracker trailer for my Fishing Barge DLX 20. Thanks
asked by: Mike D
0
Expert Reply:
The Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole # E4139 is a weld on application. It hasn't been tested for bolt on installations, so I can't confirm it will hold up if you drilled it and bolted it in place.
We have only 2 bolt-on hangers and they are for slipper springs, # CE14016G and # CE14017G.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 4-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Lighting Requirements
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Q&A: Are Shackles Necessary For A Single Axle Utility Trailer?
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Search Results: shackles
- Search Results: trailer leaf springs
- Video: Front Hanger for 2" Wide Slipper Springs Feature Review
- Video: What to Know About the CE Smith Rear Hanger Bracket for Trailer Slipper Springs
- Video: An In-Depth Look at the Rear Hanger for 1-3/4" Slipper Spring
- Shop: Front Hanger for 1-7/8" Wide Slipper Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Video: Single-Axle Trailer Hanger Kit for Double-Eye Springs: The Breakdown
- Q&A: Can Front and Rear Trailer Suspension Hangers be the Same Height with Off-Level Leaf Springs
- Q&A: Why Do Trailer Hanger/Equalizer Kits all Use Different Height Suspension Hangers
- Q&A: Will Taller Hangers Lift My Keystone Travel Trailer
- Q&A: Recommended Ways To Raise Height Of Small 4 X 8 utility Trailer
- Q&A: 4-1/4 Inch Tall Hanger Needed for 1-3/4 Inch Wide Double Eye Leaf Springs
- Q&A: Can I Change Out Longer Hangars and Short Equalizers for Longer Ones to Gain Fender Clearance
- Shop: Rear Hanger for 1-3/4" Slipper Spring
- Shop: CE Smith Front Hanger for 1-3/4" Wide Slipper Springs - 1-1/4" Tall - 9/16" Bolt Hole
- Shop: Front Hanger for 2" Wide Slipper Springs - 5" Tall - 9/16" Bolt Hole
- Shop: CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1