Is There a Bolt On Hanger Kit for Double Eye Leaf Springs  

Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…

Hey Ryan, You're right that leaf springs can flatten a bit over time, but I wouldn't go with a full 1/2 inch less. Something slightly shorter (1/4 inch or so) would be better, but otherwise, I'd stick with the 26 inch springs. Just a…

Yes, you can replace your slipper springs with double eye springs. The Double-Eye Spring #e27SR measure 26 inches from center of spring eye to center of spring eye and would work for you; these have a 2,250 lb capacity each though you will need to…

Trailer axles will often have some kind of labeling on them to indicate their weight capacity, sometimes a sticker but sometimes a metal plate too. If very old that axle sticker or plate could be long gone. The 1-1/2-inch square axle we offer, CE…

You can replace your lower rated leaf springs with a higher capacity spring with the same dimensions, but your trailer will ride much stiffer. Adding higher capacity springs will not add more to your trailer's capacity so you'll want to still…

It's pretty easy to determine the correct replacement leaf springs for your trailers, and there's different ways for double-eye springs and slipper springs. You do have to account for the sag, so go with ones that measure shorter than what…

If what you really need is a new axle you can go to a local trailer shop to you and have them custom order you the exact specs you need for a trailer axle. But to attach springs to your 1-1/2 inch square axle you would want the mount plate part…

The closest leaf spring set we have available to the 22-1/4 inch length you mentioned is the 3-Leaf Double-Eye Spring #SP-113275. This double-eye leaf spring features a length of 23-1/2 inches from the center of the spring eye to the center of the…

The longest leaf springs we offer are the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles, part #SP-210275. These springs measure 27 inches eye-to-eye and are designed for axles up to 3,500 lbs. I have attached a photo of this spring that has the…

Yes, you can change from 1-3/4 inch slipper springs to double eye springs on your trailer. You will need to have the slipper end hanger removed and have a new hanger welded on which allows the leaf spring to sit at the same height. Or you could…

Your trailer sounds like it will work just fine based on the dimensions and weight you gave. I simply recommend putting the bunks up as high as possible for your initial loading onto the trailer because the underside of your boat from my research has…

They do not have leaf springs that are specifically designed for boat trailers that are used in salt water. Since the leaf springs will flex there is no kind of plating or coating that will stay attached to the spring. Also, the process that is used…