Are there Bolt-On Hangers for Trailer Leaf Spring Suspension
Updated 11/02/2015 | Published 11/01/2015
Products Featured in This Question
Question:
I would like to use these springs but having trouble finding the right parts. I have a 1-1/2inch square axle. Id like to use all bolt on parts as I dont know how to weld and would like to save money by not having to pay someone to weld parts on. Ive seen bolt on spring hangers and spring seats that dont require welding on other sites but I dont see these on your site. Do you have all the parts I would need to do this without welding?
asked by: Devlin
Expert Reply:
We do have a couple of bolt-on spring hangers # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # e77SR. Its not likely that professional welder would charge that much. You might be able to find one locally via an iron workers union near you.
For u-bolts for your 1-1/2 inch square axle you can use # SP01-120 for 2 u-bolts and 4 nuts. For a u-bolt plate you can use # 115983. For a hanger kit you could use # APS1.
Now what you could do is use bolt-on hangers # CE14017G and # CE14016G with slipper spring # SP-179275. Then you would just need 2 of shackle bolt # 166079 per spring which includes the nuts. You would still need the u-bolts and u-bolt plates.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 2000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: leaf spring lift blocks
- Search Results: lift block
- Search Results: spring hanger extension kit
- Search Results: malone
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
- Shop: Lippert Trailer Axle Beam with Super Lube Spindles - 85" Long - 2,500 lbs to 3,500 lbs
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Article: Double-Eye Trailer Suspension System Review
- Search Results: trailer lift blocks
- Search Results: bunk
- Search Results: guide
- Video: Clean Up Your Trailer Wiring
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: Malone MicroSport Off-Road Base Trailer - 78" Load Bars
- Shop: Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" White Mod Wheel - 5 on 4-1/2
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Q&A: Leaf Spring Recommendation for 1996 Calkins Boat Trailer
- Shop: Suspension Enhancement
- Q&A: Changing Spring Hangers To Raise Or Lower A Trailer
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Video: Correct Track Trailer Alignment and Lift Kit Review
- Q&A: What Angle Should Shackle Straps be on a Triple Axle Trailer with Double-Eye Leaf Springs
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Effect of Installing Shorter Shackle Straps on Trailer with Axle Over-Under Kit
- Q&A: Is There A Longer Tongue Kit Available for the Malone MicroSport Trailer?
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Video: Curt Mounting Bracket for 4-Pole Flat Trailer Connector Review
- Video: How to Choose a Trailer Brake Controller
on Trailer Leaf Springs
