See what our Experts say about this Redline Trailer Bearings Races Seals Caps

• Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
  If you can send me the diameter of the spindle where the grease seal sits and the diameter of the hub where the seal is pressed onto I can verify if we have the correct seal. Currently I do see we carry 2 hubs which use the Inner Bearing # LM67048 and Outer Bearing # LM11949. First is the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR which uses the Seal # 168233. This seal has an inner diameter of 1.688" and outer diameter of 2.332". The other hub is an Agricultural Hub...
  view full answer...
• Replacement Bearings and Seals Based On Printed Number On Face Of Bearing
  For your bearings, I recommend the etrailer.com Replacement Trailer Hub Bearing # LM67048. For your seals, I can't find the part number or dimensions anywhere, so if you send me dimensions of inside and outside diameters, I'll do what I can to help.
  view full answer...
  
• Replacement Hub Needed with LM67048 Inner Bearing and LM11949 Outer Bearing
  Terry, you are a rare specimen, and a welcomed question-asker. Thanks for providing all of those fine details! To replace your current hub, you need the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR. This comes with the correct bearings and races, but you'll need to also order the Grease Seal # SL150 and swap it out with the on that comes with the kit because this one will have the correct inner diameter. Let me know if you have any other questions about this, or if there's...
  view full answer...
• Recommended Grease Seal w/ a 2.33 OD and a 1.5 ID
  Yes, we do and thanks for the measurements Randy. It's the Grease Seal SL150 item # SL150. These are sold individually. What kind of trailer do you have?
  view full answer...
• Looking For Spindle With LM67048 Inner And LM11949 Outer Bearing
  Hello Brandon. Well, this isn't reddit, but we do offer one spindle that used the LM67048 (1.25" inner diameter) inner bearing and the LM11949 (0.75" inner diameter) outer bearing. Take a look at the Agricultural Spindle for 3,000-lb Trailer Axles # TRU54FR. The # DX22XR does use a different seal though, so in order to use the # TRU54FR spindle you will need the # SL150 seal as well. I have included detailed dimensions of the # TRU54FR spindle below for your reference.
  view full answer...
• Can I use a different seal than what comes with DX22XR
  That's a great question, Steven! Yes, you can totally swap hub # AH15450ECOMP for hub # DX22XR. To make it work, just be sure to use seal # SL150, it has a 1.5" inner diameter and a 2.331" outer diameter, which will fit perfectly with the Dexter hub. Just a quick note: when swapping hubs, it’s best to replace all of them with the same model to keep things consistent. Out of curiosity, what kind of trailer are you working on?
  view full answer...
• Replacement Trailer Hubs For Spindle That Uses 1-1/4" Inner Bearing and 3/4" Outer Bearing
  The Agricultural Trailer Hub Assembly # AH15450ECOMP is what you are looking for. It uses a Inner Bearing # LM67048 which has an inner diameter of 1.250" and an Outer Bearing # LM11949 with an inner diameter of .750". You can verify that the Grease Seal # SL150 with the inner diameter of 1.500" matches your spindle. I did notice that there is a lot of scratches on your spindle. If these are deep grooves that your fingernail will catch on you should replace your Spindles # TRU54FR so that...
  view full answer...
  
• Replacement Bearings For Shorelander Trailer Hub SS733
  I think that the 1-1/2" measurement that you pulled from your spindle is the landing for the grease seal. Your Inner Bearing # LM67048 (1.250 inner diameter) and Outer Bearing # LM11949 (0.750" inner diameter) do match what the SS733 hub shows as a 1-1/4 x 3/4" hub. We do have the bearings, races and grease seals options that you will need to replace those components of your axle but currently we do not have a hub or hub assembly that will fit your current spindle. Inner Bearing # LM67048 Inner...
  view full answer...
  
• Replacement Grease Seal for Trailer With Bearings LM67048 and LM11949
  I would recommend you verify the measurements but I am fairly certain with your bearing combo the correct replacement seal would be the # SL150 which has an inner diameter of 1.5 inch and an outer diameter of 2.332. Use a caliper to verify this by measuring outer diameter of current seal and outer diameter of spindle where seal rides.
  view full answer...
• Replacement Seal for Trailer Hub with 1.5 ID and 2.328 OD
  Sounds like you're needing the Redline Grease Seal # SL150. This has an ID of 1.5" and an OD of 2.332" like what you're needing. If your bearings are toast, then you'll want to replace those too. If you can get me part numbers or measure the spindle and hub where they ride, I can see what we have, or you can filter through the linked selection. Be sure to use a digital caliper and measure to the 4th decimal (1.234 for example) to ensure proper fitment.
  view full answer...
• Grease Seal Recommendation for a Trailer Spindle with 1.5 in Inner Diameter
  If your customers are blowing out their grease seals most likely that is due to too much grease being pushed into the hub. Using a Bearing Buddy Seal like the part # BB60005 would give you a grease seal that is more reinforced than a standard one, but a regular seal would also work just fine. The # BB60005 has an inner diameter of 1.375 inches and an outer diameter of 1.980. Since you are looking for a seal that has an inner diameter of 1.5 in you would want the part # 10-9 if the outer...
  view full answer...
• Seal in L44649 Bearing Kit is Too Small to Fit Trailer Hub
  It sounds like you are talking about the grease seal. Once installed the grease seal should fit flush like your old one. The fact that it is not and that grease is leaking out means that the seal is not the correct size for the hub. What is the diameter of the hub bore where the grease seal fits into the hub? This measurement has to be as accurate as possible so I recommend using calipers such as # PTW80157. If the measurement ends up being at or close to 2.332 inches then you likely need...
  view full answer...
• Grease Seal SL150 Fits Bearing LM11949
  I am showing that you can use the Grease Seal SL150Grease Seal, item # SL150, and the Bearing, item # LM11949, together.
  view full answer...
• Grease Seals To Fit Trailer with 1.5" Inner and 2.332" Outer Diameter measurements.
  The Grease Seal # SL150 which has an inner diameter of 1.500, and an outer diameter of 2.332", is going to be the closest we have for that size grease seal. I recommend the Spindle Grease Seal Set # BB60007. This kit is designed to fit a 1-1/4" spindle landing and the outer seal has a 2.33" outer diameter. The kit adds a stainless steel ring that the neoprene grease seal rides on for an extended life span.
  view full answer...
• Grease Seals for Replacement of Chicago Rawhide # 14974 Grease seals are the # SL150 Seals
  The Chicago Rawhide #14974 grease seal has an Outside diameter of 2.332 inches and is a single lip seal. The inside diameter of the seal where it contacts the spindle is 1-1/2 inches and the thickness of the seal or width is 1/2 inches. The correct replacement for this seal is the Grease Seal, item # SL150. The item # RG06-050 seals have an inside diameter of 1.719 inches and an outside diameter of 2.565 inches so they would not be the correct replacement parts.
  view full answer...
• Replacement Bearings and Grease Seals for Karavan Ultra 2 Place Snowmobile Trailer
  Knowing that the trailer uses a # BB1781 Bearing Buddy helps me to identify the correct replacement bearings. We carry two hubs with that bolt pattern, one with a 5 lug on 4-1/2 inch bolt circle, the other much less likely possibility is a 4 lug hub that's typically used for agricultural applications. Your outer bearing is a # LM11949, outer race is # LM11910, and the inner bearing is likely # LM67048, which would be used with the # LM67010 race. You can confirm this by using a digital...
  view full answer...
• Availability of Replacement Dust Covers That Fit Over Hub Bore
  We do have grease seals that have 1.5" ID but you'll also want to measure where the grease seal makes contact with your hub so that it is a snug fit. If that measures 1.987" then you need part # 10-9 (part # RG06-020 for a 2 pack) and if it measures 2.332" then you'll need part # SL150 instead. It's best to take grease seal and bearing measurements with a digital caliper to ensure that what you get is an exact fit. For the washer that goes on the end of the spindle we do have a variety...
  view full answer...
• Replacement for Grease Seal with 2.335 Outside Diameter and 1.5 Inside Diameter
  The closest option we have to your measurements is the Grease Seal # SL150 that features an outside diameter of 2.332 inches and an inside diameter of 1.500 inches. This is awfully close to the numbers you provided so you may want to measure your existing seal once more to see if it matches. Also keep in mind that grease seals tend to get a bit distorted from the physical act of removing them from the hub so this is likely the correct seal. If you can find a number stamped inside the seal...
  view full answer...
• Replacement Hub Assembly That Uses Inner Bearing LM67048 and Outer Bearing LM11949
  Currently the only hub we carry that uses the Inner Bearing # LM67048 and Outer Bearing # LM11949 is the Trailer Hub Assembly # AH15450ECOMP. This is a idler hub that is to be used on 3,000lb axles. It has a 4 on 5" bolt pattern and uses threaded bolts rather than lug nuts to hold on the wheel. The bearing races are preinstalled so you will only need the bearings listed above, Grease Seal # SL150 and Grease Cap # TRAG-DC-196.
  view full answer...
• Replacement Bearings Races And Seals For Agricultural Trailer
  I was unable to find Timken bearings with the LM11949 part number. The part # LM11949 we carry is a replacement outer bearing for AH15450E agricultural hub. These have an inner diameter of .750 inches. The matching outer race for this bearing is part # LM11910. The outer seal that works with this bearing and race is part # SL150. We do not currently offer a kit that includes the # LM11949 bearings. I highly recommend replacing the inner bearings, races, and seals at the same time....
  view full answer...
• Can the Agricultural Style 4 on 5 Inch Hubs Be Replaced with a More Common Bolt Pattern
  It is possible to replace just the trailer hub instead of the whole axle but I would need to know what bearings your current hub has in order to see if that is possible. For example, the only trailer hub we offer with a 4 on 5" bolt pattern is the Trailer Hub Assembly part # AH15450ECOMP and this uses an LM67048 inner and LM11949 outer bearing therefore can be replaced with the Trailer Hub Assembly part # DX22XR because this also uses those same bearings. The Grease Seal SL150 part # SL150...
  view full answer...
  
• How Thick is Grease Seal SL150
  Grease seal # SL150 has an overall thickness of 1/2 of an inch. There isn't much more to say about it so I have linked a video review of the seal for you!
  view full answer...
• Locating the Correct Grease Seal Size for a Boat Trailer
  After doing some research I was not able to locate a grease seal with a 1.500 inch inner diameter and a 2.500 inch outer diameter. I spoke with my grease seal supplier and they do not carry a grease seal with those dimensions either. If you are measuring the grease seal itself, I would recommend measuring the hub and spindle. Sometimes the rubber of the grease seal and the outer ring can become deformed or damaged. I also recommend using a precise measuring tool such as a dial caliper....
  view full answer...
  
• Recommended Replacement Trailer Hub Components
  I was unable to find the Chicago Rawhide Seal 550081 you said you have on your trailer. With the inner bearing part # LM67048 and Inner Race part # LM67010, and the outer bearing part # LM11949 and Outer Race part # LM11910, the seal we offer is part # SL150 as you mentioned. This seal has an inner diameter of 1.5 inches and an outer diameter of 2.332 inches. To make sure you choose a seal that has the right dimensions for your spindle and hub. You can use a digital caliper like part...
  view full answer...
  

Do you have a question about this Trailer Bearings Races Seals Cap?