Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
Updated 05/30/2024 | Published 05/13/2024
Products Featured in This Question
Question:
working on a old trailer axle replacing the spindle grease seal. Outer bearing is 11949 and the inner bearing is 67048. The grease seal looks like a old fashion o ring that fits inside a cap that has ep 2266378 on it. It go on after the inner bearing. the trailer is about 50 year old. can you help?
asked by: Bennie E
Expert Reply:
If you can send me the diameter of the spindle where the grease seal sits and the diameter of the hub where the seal is pressed onto I can verify if we have the correct seal.
Currently I do see we carry 2 hubs which use the Inner Bearing # LM67048 and Outer Bearing # LM11949. First is the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR which uses the Seal # 168233. This seal has an inner diameter of 1.688" and outer diameter of 2.332". The other hub is an Agricultural Hub # AH15450ECOMP which uses the Seal # SL150. This seal has an inner diameter of 1.5" and outer diameter of 2.332"
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.25 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Search Results: 10~36 seal
- Search Results: leaf springs
- Search Results: trailer hubs and drums
- Search Results: trailer leaf springs
- Q&A: Recommended 5 Lug Hub for a Spindle w/ 141125 Inner and 09067 Outer Bearings
- Search Results: trailer bearings races seals caps
- Search Results: studs
- Search Results: 40kadpf
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles
- Shop: 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Shop: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Shop: Trailer Wiring
- Shop: Grease Seals 10-36 (pair)
- Q&A: Is 1.25" ID Bearing Too Large to Replace 1.19" ID Bearing?
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Q&A: Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
- Q&A: Trailer Idler Hub That Has a 5 on 4-1/2 Lug Pattern and Uses LM67048 and LM11949 Bearings
- Q&A: Does Changing From A 4 Leaf To A 6 Leaf Spring Add To Ride Height?
- Q&A: Can I use a different seal than what comes with DX22XR
- Shop: RV Mattress
- Video: Ultimate Overview of the Curt 7-Way Trailer Plug Extension
- Video: An In-Depth Look at the Curt 7-Way Trailer Plug Extension
- Video: Installing the Dexter U-Bolt Kit on a 2018 Grand Design Reflection Fifth Wheel
- Video: Complete Breakdown of the Dexter Trailer Axle with Idler Hubs
- Video: Breaking Down the Timken Replacement Trailer Wheel Bearing-TMK89FR
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-300
Bennie H.
5/15/2024
Diameter of axle where the seal sits is1.735 and of the hub where the is pressed in is2.32