bing tracking image
  1. Roof Rack
  2. Yakima
  3. Aero Bars
  4. 60 Inch Bar
  5. Black
  6. Overhang
THIS ITEM IS NOT A FIT FOR
2006 Mazda 6
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Yakima

Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2

Part Number: Y67KB
In Stock
$694.80
Roof Rack
Not Confirmed to Fit

2006 Mazda 6

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This stylish, aerodynamic Yakima roof rack gives you the space to carry gear on your vehicle. Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs to fixed mounting points on your vehicle's roof. Great Prices for the best roof rack from Yakima. Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2 part number Y67KB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (10600)
  • Q & A (0)
  • Photos

Yakima Roof Rack - Y67KB

Highlights

  • Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
  • Complete Roof Rack System: Includes 2 JetStream crossbars, 4 SkyLine towers, and a custom fit kit for your vehicle.
  • Ready for Cargo and Adventure Gear: Works with cargo, water, snow, and bike carriers that mount in top channels or clamp around the bars.
  • Smooth, Quiet Drives: Aerodynamic design with push-down rubber strips helps reduce wind noise and vibration.
  • Strong Carrying Capacity: Aluminum construction supports up to 165 lbs while staying lightweight and durable.
  • Easy Accessory Mounting: Push-down rubber strips let you press hardware into the tracks—no trimming needed.

Features to know about

Haul Heavy Gear with Confidence: 165-lb Weight Capacity

When you’re loading up for camping, paddling, or cross-country trips, strength matters. The Yakima SkyLine Roof Rack system is built from aluminum and rated for up to 165 lbs, giving you the solid support you need for heavier cargo like roof tents or multiple kayaks. It’s sturdy enough to handle serious outdoor setups without flexing or rattling when the road gets rough.

Keep It Quiet on the Highway: Aerodynamic JetStream Crossbars

Nothing ruins a road trip like constant wind noise. The JetStream crossbars on this setup use an aero-style shape and push-down rubber strips in the top channels to help cut down wind noise and vibration. Even at highway speeds, that smoother airflow keeps things quieter, so you can focus on the drive instead of a constant whistle overhead.

Load Accessories Fast: No-Trim Push-Down Rubber Strips

Mounting your gear shouldn’t require cutting parts to fit. The split rubber strips on these Yakima bars let you press hardware directly into the top channels without trimming anything. Once your mounts are in place, the strips close back around them to keep out wind and weather. It’s a cleaner, faster setup that makes swapping between accessories simple.

Get Set for Any Adventure: Works with Most Cargo, Water, Snow, and Bike Carriers

Whether it’s a cargo box for a family vacation or a kayak cradle for the weekend, these crossbars are ready. The aero-style design works with accessories that mount in the top channels or clamp around the bars, so your existing gear stays compatible. You can easily switch between watercraft, bikes, or luggage as your plans change through the seasons.

Lock It Down When You Stop: SKS Lock Core Option

When you’re parked at a trailhead or campsite overnight, adding Yakima Same Key System (SKS) lock cores (sold separately) helps deter theft of your rack setup. It’s an easy upgrade that keeps your system secure without complicating installation or daily use.

Specs

Dimensions

  • Crossbar dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
  • Top channel dimensions: 7/8" wide x 7/16" tall x 7/16" opening

Weight and Capacity

  • Weight capacity: 165 lbs

Color

  • Color: black

Construction

  • Construction: aluminum

Warranty

  • Limited lifetime warranty

8000426 Yakima JetStream Crossbars - Aluminum - 60" Long - Black - Qty 2

8000163 Yakima SkyLine Roof Rack Towers for CoreBar, JetStream, and RoundBar Crossbars - Qty 4

8000224 Yakima Landing Pad 4

Installation Details Y67KB Installation instructionsAlternate Instructions Y67KB Installation instructions



Ratings & Reviews

4.8

12210 reviews
5 Stars
(11106)
4 Stars
(712)
3 Stars
(211)
2 Stars
(12)
1 Star
(169)
Review sort icon
This stylish, aerodynamic Yakima roof rack gives you the space to carry gear on your vehicle. Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs to fixed mounting points on your vehicle's roof.

by:

Holds up great! One year later and still working like day one. Goes in conjunction with my other review. Very happy with this purchase.



by: lambda05/31/2025

Poor protection of the cross bars resulted in gouging of the aluminum during shipment. The retail level packaging is inadequate for putting on a shipping label and hoping for a gentle ride. Given Yakima’s premium price, you hope for better protection. Nothing that a file and black marker can’t fix, but disappointed. The cross bars themselves will be functional, have two sets already on different vehicles.



by:

Great product and etrailer was super helpful with ordering process etc



by:

Quiet crossbars that look good and do not howl at highway speeds.



by:

Received order promptly thanks to help from Korren! Love Yakima products, well made, components all fit well. Instruction were easy to follow and the products have been well thought out in terms of markings, measuring distances to my specific car model and ease of assembly.



by:

Fast delivery. Yakima roof system for my 2017 Tahoe was perfect.



by:

These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.



by:

Very sturdy hold with a matte look and fine textured feel. Very light making for easy install.



by:

Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.



by:

Nice solid crossbars and perfect fit for a Thule Hullivator kayak rack.



by:

I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!



by:

Ordering was a breeze. Fast shipping. Excellent communication. Product arrived well-packaged. Product easy to install; completely as described. Yakima products are superior-performers. etrailer is an excellent source for truck & trailer products.



by:

All aspects of the purchase and installation were great. Based on the information provided on the etrailer.com website, I had a high level of confidence that I was purchasing the correct product(s) for my vehicle. The installation was relatively simple and straightforward and the rack is rock solid on my roof. It appears that I did a great job of following the directions :)



by:

High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.



by:

Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.



by:

The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.

etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.



by:

These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.



by:

Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.



by:

Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.

As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down.



by:

1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.



by: John02/27/2025

The product itself was excellent. However, it came with no installation instructions showing how to remove and replace the shorter cross-bars. Fortunately, my son-in-law who is an engineer and very knowledgeable figured it out and did the installation.



by:

Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!



by:

The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.



by:

Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.



by: Chris10/24/2024

Yakima racks are outstanding!


25
25

See what our Experts say about this Yakima Roof Rack

  • Can I Use the Thule Hullavator # TH898 with the Yakima JetStream Crossbars and Lock Cores?
    I just went ahead and looked up your orders and confirmed that you recently ordered the Yakima Same Key System (SKS) Lock Cores (QTY 4) # Y07204, the Yakima TimberLine Towers # Y33TR, and the 50" JetStream Crossbars # Y00425. The lock cores that you purchased install into the TimberLine towers and not into the end caps of the JetStream crossbars themselves. With that being said, the Thule Hullavator # Y00425 is compatible with the JetStream crossbars. It is important to note, though,...
    view full answer...
    Image 1 for
  • Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
    Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
    view full answer...
    Image 1 for
  • Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
    Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
    view full answer...
  • Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
    Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
    view full answer...
  • Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
    Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
    view full answer...
  • Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top
    Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
    view full answer...
  • How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
    According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
    view full answer...
  • Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
    Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
    view full answer...
  • Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
    The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
    view full answer...
    Image 1 for
  • Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
    There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
    view full answer...
  • What Does The Yakima TimberLine Roof Rack for Raised Rails Y39YD Come With?
    Hello Alexander, thanks for reaching out. The Yakima TimberLine Roof Rack for Raised Rails part # Y39YD is a full roof rack system, and this is the correct fit for the 2025 Kia Sorento. It comes with four TimberLine Towers and two 50" JetStream crossbars. If you want to do a larger crossbar, it is possible, we just wouldn't offer it as a kit. The next size up for the Yakima Aero bars is a 60". So all you would need is the four pack of TimberLine Towers part # Y33TR, and a set of 60" crossbars...
    view full answer...
  • Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
    The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
    view full answer...
  • How To Carry Skis and Snowboards on a 2017 Lexus NX 200t With Flush Side Rails
    So long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis. For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories. For a roof rack mounted ski carrier, I recommend the Yakima FatCat...
    view full answer...
  • Roof Rack for 2004 Toyota 4Runner to Carry Yakima Showdown Kayak Carrier
    The Yakima Jetstream roof rack part numbers # Y00426 and # Y00147 that fits your 2004 Toyota 4Runner would do a great job carrying the Yakima Showdown part # Y04081. The Jetstream is very aerodynamic which helps with wind noise, is easy to install, and is one of the highest quality roof racks out there so you'll be very happy with it.
    view full answer...
  • What Parts Do I Need to Add a Set of Crossbars to the Yakima 60" HD Tracks for Roof Racks?
    Hey Troy. The Yakima 60" HD Tracks for Roof Racks item # Y74MR require the following parts to add a crossbar setup: SkyLine Towers for Yakima Crossbars item # Y53TR Landing Pad 26 for Yakima SkyLine Towers item # Y75ZR. You'll need two sets. One for each crossbar. 60" Long Yakima JetStream Crossbars item # Y00426 What do you plan on using your new roof rack for?
    view full answer...
  • Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback Wagon
    I went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
    view full answer...
  • Are Thule and Yakima Roof Boxes Compatible with RockyMounts Ouray Crossbar for a Ford Flex
    The RockyMounts Ouray Crossbars will be compatible with a Thule or Yakima roof box like the Motion XT # TH629706 or the SkyBox 16 # Y95AV. If you can let me know what year Ford Flex you have I can help you find the correct roof rack fit for your application.
    view full answer...
  • Roof Rack Recommendation for 2021 Jeep Grand Cherokee with Flush Black Rails
    To add a roof rack to your 2021 Jeep Grand Cherokee with the flush black rails you'll need the crossbars, leg kit, and a fit kit. I really like the Yakima JetStream because it's a high quality system with adjustments in the legs to give you the best fit possible. Here are the parts you'll need: 60" JetStream Crossbars - # Y00426 BaseLine Towers - # Y28TR Fit Kit - # Y06121 Lock Core Kit - # Y07204 (optional) If you let me know what you plan on using the roof rack for I'd be more than...
    view full answer...
  • Recommended BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers on a 2011 Honda Civic
    Hey Hollie. The BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers item # Y06148 and item # Y06150 are indeed genuine Yakima parts. They are not made by another company. They're going to allow you to mount a set of crossbars to your 2011 Honda Civic. These are custom fit and secure to the roof inside the door jams. The BaseClip Fit Kit item # Y06148 and item # Y06150 work with the BaseLine Towers for Yakima Crossbars item # Y28TR. The 60" Long Yakima JetStream Crossbars item # Y00426...
    view full answer...
  • Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
    To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
    view full answer...
    Image 1 for
  • Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
    Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
    view full answer...
  • Which Yakima Roof Rack Fits 2022 Ford Maverick
    Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
    view full answer...
  • Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
    Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
    view full answer...
  • Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
    While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
    view full answer...
  • Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
    To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
    The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
    view full answer...
  • Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
    I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
    view full answer...
  • Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
    The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
    view full answer...
    Image 1 for
  • How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
    The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
    view full answer...
  • Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
    For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
    view full answer...
  • Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
    Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
    view full answer...
  • Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point Roof
    The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
    view full answer...
  • Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
    Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
    view full answer...
  • What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
    I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
    view full answer...
  • Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
    Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
    view full answer...
  • Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
    Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
    view full answer...
  • Roof Rack System for 2026 Chrysler Pacifica
    Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
    view full answer...
  • Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
    Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
    view full answer...
  • Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
    For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
    view full answer...
  • Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
    Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
    view full answer...
  • Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
    The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
    view full answer...
  • Best Roof Rack for 2020 Kia Soul with Fixed Mounting Points
    The best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
    view full answer...
  • What Parts Do I Need to Add a Set of Crossbars to the Yakima 60" HD Tracks for Roof Racks?
    Hey Troy. The Yakima 60" HD Tracks for Roof Racks item # Y74MR require the following parts to add a crossbar setup: SkyLine Towers for Yakima Crossbars item # Y53TR Landing Pad 26 for Yakima SkyLine Towers item # Y75ZR. You'll need two sets. One for each crossbar. 60" Long Yakima JetStream Crossbars item # Y00426 What do you plan on using your new roof rack for?
    view full answer...
  • Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback Wagon
    I went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
    view full answer...
  • Yakima Roof Rack Parts for 2018 Subaru WRX
    Yes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
    view full answer...
  • How Much Does Complete Yakima LockNLoad Platform For 2019 Chevy Suburban Weigh?
    Hello Jake, thanks for reaching out. I will go ahead and list the weight of each product you mentioned below: - Yakima Skyline Towers 4 Pack # Y53TR - 6 lbs - Yakima Landing Pad 17 4 Pack # Y00243 - 2 lbs - LockNLoad SL Adapter 4 Pack # Y05042-2 - 1.5 lbs - Yakima LockNLoad Platform 60" Long x 54" Wide # Y05045 - 57 lbs Let me know if there is anything else I can do to help
    view full answer...
  • Parts Needed to Use Yakima SkyLine Tower Setup from ARE Truck Camper on 1998 Jeep Wrangler
    To use your Yakima SkyLine setup on your 1998 Jeep Wrangler you just need the 42" Tracks # Y01126 and 2 sets of the Landing Pad 1 # Y00221. This will then allow you to easily transfer the SkyLine Towers # Y53TR and whatever crossbars you are currently using, like the 50" JetStream # Y00425. Just be sure that the crossbars from your ARE camper shell don't stick out further than the side mirrors on your Jeep. I have attached installation instructions for you to check out.
    view full answer...
  • Can The Towers And Fit Kit For The Yakima SkyLine Roof Rack Y93FB Be Purchased Separately?
    Hi Joel! You can indeed purchase the towers and fit kit without the bars from the Yakima SkyLine Roof Rack for Fixed Mounting Points - RoundBar Crossbars - Steel - Black - Qty 2 # Y93FB for your 2020 Subaru WRX. I have those two parts listed below: SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 # Y00248 RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
    view full answer...
  • What is the Difference Between Yakima Landing Pads 1 and 4
    The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
    view full answer...
  • How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
    Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Yakima Landing Pad For Roof Rack Tower
    The landing pad you have is either going to be in the kit Landing Pad 1 # Y00221 or Landing Pad 4 # Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut.
    view full answer...
  • Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track System
    The Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
    view full answer...
  • Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra Groove
    I believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
    view full answer...
  • Roof Rack Recommendation for a 2008 Hummer H3 with Factory Tracks
    For a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
    view full answer...
  • Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory Rails
    For your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
    view full answer...
  • Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack Tracks
    Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
    view full answer...
  • Roof Rack Recommendation for 2005 Chrysler Town and Country Van
    Your 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
    view full answer...
  • How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2
    To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
    view full answer...
  • Roof Rack Fits for 2003 Chevrolet Suburban
    The current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
    view full answer...
  • Roof Rack for 2007 Hummer H3 with Roof Rack Channels
    For your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
    view full answer...
  • Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control Towers
    If the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
    view full answer...
  • Roof Rack Recommendation for 2009 Hummer H2
    For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
    view full answer...
  • Recommended Roof Rack and Mud Flaps for 2007 Hummer H3
    For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
    view full answer...
  • Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding Doors
    When installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
    view full answer...
  • Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge Caravan
    To carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
    view full answer...
  • Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3
    If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
    view full answer...
  • Recommended Bike Carrier for Hummer H3
    The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
    view full answer...
  • Recommended Roof Rack for a 2012 Land Rover Range Rover Sport
    The roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
    view full answer...
  • What is the Difference Between Yakima Landing Pads 1 and 4
    The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
    view full answer...
  • How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
    Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Yakima Landing Pad For Roof Rack Tower
    The landing pad you have is either going to be in the kit Landing Pad 1 # Y00221 or Landing Pad 4 # Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut.
    view full answer...
  • Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track System
    The Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
    view full answer...
  • Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra Groove
    I believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
    view full answer...
  • Roof Rack Recommendation for a 2008 Hummer H3 with Factory Tracks
    For a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
    view full answer...
  • Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory Rails
    For your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
    view full answer...
  • Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack Tracks
    Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
    view full answer...
  • Roof Rack Recommendation for 2005 Chrysler Town and Country Van
    Your 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
    view full answer...
  • How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2
    To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
    view full answer...
  • Roof Rack Fits for 2003 Chevrolet Suburban
    The current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
    view full answer...
  • Roof Rack for 2007 Hummer H3 with Roof Rack Channels
    For your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
    view full answer...
  • Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control Towers
    If the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
    view full answer...
  • Roof Rack Recommendation for 2009 Hummer H2
    For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
    view full answer...
  • Recommended Roof Rack and Mud Flaps for 2007 Hummer H3
    For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
    view full answer...
  • Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding Doors
    When installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
    view full answer...
  • Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge Caravan
    To carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
    view full answer...
  • Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3
    If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
    view full answer...
  • Recommended Bike Carrier for Hummer H3
    The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
    view full answer...
  • Recommended Roof Rack for a 2012 Land Rover Range Rover Sport
    The roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
    view full answer...
  • 2003 Hummer H2 Roof Rack Recommendation for Roof Top Tent
    Hey Eduardo, thanks for reaching out! We have exactly what you need with the Yakima SkyLine Roof Rack for Fixed Mounting Points # Y67KB. This installs to the tracks on top of your Hummer and has a high enough weight rating to handle the Roof Nest 10 just fine. I'm not sure what mounting kit you have for your roof tent, but the crossbars on this kit only measure 2-3/4" wide x 1-1/8" tall which is pretty standard and shouldn't be giving you any mounting issues. What kind of camping trips...
    view full answer...

Do you have a question about this Roof Rack?


Info for this part was:

Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Daron K
Edited by:
Daron K
Employee Alex H
Written by:
Alex H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924