See what our Experts say about this Yakima Roof Rack

• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Recommended Crossbars to Mount a Thule Hullavator to a 2024 Subaru Outback Touring XT
  Bruce, to mount the Thule Hullavator # TH898 on your 2024 Subaru Outback Touring, you're just going to need to add a set of crossbars. I recommend going with an Aero style, personally, like the Thule WingBar Evo Crossbars # TH711120 with the feet # TH710601 and the fit kit # TH37CE. These aren't any more or less special than the others, but I think the shape of these bars are much nicer and it will work with about every accessory that requires bars to mount.
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Should Yakima HD Crossbars Have Downward Bow in Middle
  Hey Bo, it is not normal for the Yakima 60 inch HD crossbars like the part # Y01156 to have a downward bow in the middle of them. They should be basically totally flat. I attached a picture of what they should look like for you to check out.
  view full answer...
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Roof Rack System For 2023 Lexus GX 460
  Hello Mike. I am happy to find the right roof rack system for you but first I need a little more information about your Lexus GX 460. The rails that run from front to back, are the flush mounted or raised?
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Installing The Thule Hullavator On Yakima HD Crossbars On A 2021 Toyota Highlander
  The Yakima HD Crossbars # Y01156 will work with the Thule Hullavator # TH898. Based on the pictures you sent in it looks like you have the crossbars installed upside down. The end caps have an opening on the other side that lets you easily slide in t-slot accessories. You'll just need to unmount the crossbars from the towers, flip them over, and remount them to the towers. The screw seen in your pictures is what holds the endcaps in place. Removing those will allow you to remove the endcaps....
  view full answer...
  
• Recommended Roof Rack for a 2023 Kia Sorento w/ Raised Side Rails
  I would be happy to help you find a set of crossbars that will fit the factory raised rails of your 2023 Kia Sorento. This kit mounts directly to the side rails. You will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR HD Bar SL Adapter for Yakima TimberLine Towers - Qty 4 item # Y03541 This aero bar roof rack...
  view full answer...
  
• Can Two Thule Hullavators Be Used On A 2021 Toyota RAV4?
  I have a different kayak carrier option for you, but the Thule Hullavator # TH898 you mentioned are 36" long each and while a bit of them will hang over the end of the crossbars the longest crossbars available for your 2021 Toyota RAV4 are 55" so you will not have enough room. Instead I recommend going with the Hullavator on one side of the vehicle, and a standard carrier such as the Malone SeaWing W/Load Assist # MPG113MD one the other side as it is much lighter and quite a bit narrower. The...
  view full answer...
• Compatibility of Mounting Bracket for Yakima Skyrise Tent with Yakima HD Crossbars
  This Replacement Mounting Bracket # 8880735 is for the Yakima SkyRise Rooftop Tent like # Y07437. These tents and their clamps are compatible with most aftermarket round, square, aero, and elliptical crossbars including Yakima HD crossbars like # Y01156. I recommend getting replacement lock cores # Y07204 as well so that you can use the same key with both your new bracket and your old brackets. If you know the key numbers of your other mounting brackets, you can order a single separate...
  view full answer...
• What is the Dynamic Weight Capacity for the Yakima HD Crossbar System on a 2022 Subaru Outback?
  The maximum static weight capacity for the Yakima HD Crossbars # Y01156 along with the Timberline Towers # Y33TR on your 2022 Subaru Outback Wagon is rated at 500 pounds. This weight limit is the maximum weight limit for each of the components. To have a complete crossbar system, you will also need the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine # Y03541. You also have the option to add Yakima Same-Key Lock cores # Y07204 to deter the theft of your crossbars.
  view full answer...
• Does Thule Hullavator Fit Yakima HD Crossbars Using T-Slots
  Yes, you can absolutely mount your Thule Hullavator Pro Kayak Carrier # TH898 into the T-slot channels of the Yakima HD crossbars. The HD crossbars are available in the following sizes: - 55" Long: Yakima HD Crossbars # Y01156 - 60" Long: Yakima HD Crossbars # Y01157 - 68" Long: Yakima HD Crossbars # Y01158 - 78" Long: Yakima HD Crossbars # Y01159
  view full answer...
• Thule Hullavator Kayak Carrier Mounting Requirements
  To install Thule's load-assist Hullavator kayak carrier # TH898 on a vehicle's roof rack the ends of the bars must extend out past the roof rack feet by at least 4-inches. You can see this requirement illustrated in the linked diagram. The comparable Yakima ShowDown carrier # Y04081 also has a similar bar space requirement. If your roof rack is a Subaru factory type whose bars do not extend past the rack feet/rails then you can still use the Hullavator but you'll need to add a different...
  view full answer...
  
• Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak Carrier
  In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
  view full answer...
• 2016 Lexus GX 460 Flush Mounted Rails Fit Kit
  For your 2016 Lexus GX 460, you will need the Landing Pad 30 for Yakima SkyLine And Control Towers - Qty 6, part # Y25ZR, and not a RidgeClip. This kit works for Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 part # Y01156. You will also need the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03541. The last thing you will need is the Yakima RidgeLine Towers For Yakima Crossbars part # Y00145. This rack will have a weight limit...
  view full answer...
• What Crossbars Allow Me to Use the Hullavator # TH711420 on My 2022 RAV4 with Flush Rails?
  I recommend looking at the Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156, which also requires Towers # Y53TR, Adapter # Y03541, and Landing Pads # Y98FR. This will fit your 2022 Rav4 with flush factory rails and should give you 4" of crossbar overhang on each side to use the Hullavator. One way you can tell for sure is by measuring from mounting point to mounting point on your roof. If that measurement does not exceed 47 inches, the Hullavator will have enough length.
  view full answer...
• Correct Yakima SKS Lock Core Kit for Yakima HD Roof and OverHaul HD on a 2016 Toyota Tacoma
  That is an excellent setup and I know you'll be happy with that on your 2016 Toyota Tacoma. I'll list out all of the parts you'll need (just so you have them all in one place) but I did want to say while the OverHaul HD does come with locks, we don't have a way to choose the correct lock cores that come in the packaging so your best bet is to go with the 6-lock core SKS # Y07206 because it gives you matching cores for the 2 needed for the ladder rack and then the 4 needed for the roof rack. With...
  view full answer...
• Do the Yakima HD Bars Fit A 2015 Lexus ES 350 With A Glass Sunroof?
  I went ahead and spoke with Yakima and they said that you actually can use the Yakima HD Crossbars # Y01156 with the BaseLine Towers for Yakima Crossbars # Y28TR, the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541 and the fit kits # Y06175 & # Y06160 with your 2015 Lexus ES 350 that has a glass roof. We list this as a "non-fit" due to the fact that you could potentially damage your sunroof while this system is installed, but it'll physically fit...
  view full answer...
  
• Is Yakima MegaWarrior Cargo Basket Compatible With Yakima HD Crossbars
  You can absolutely use Yakima HD crossbars with the Yakima MegaWarrior Large Roof Rack Cargo Basket # Y07080. The two are compatible, but you will need to use the clamps to install the MegaWarrior as there is not a way to mount this basket in the bars' channel. The only thing I do recommend adding to this basket, in order to protect your investment, is the Locking Brackets with SKS Cores # Y07064. As for the Yakima HD crossbars, they are available in a number of different sizes: 55 inches...
  view full answer...
• Heavy Duty Roof Rack Recommendation for 2021 Subaru Outback Wagon
  For your 2021 Subaru Outback Wagon the Yakima HD roof rack kit part # Y01156, # Y00148, # Y46VR, and Y03541 is a confirmed fit and would work great. This is a higher capacity roof rack that has crossbars that are rated for 220 lbs. This does not require removing the roof rails either. I attached install instructions link for this for you to check out as well.
  view full answer...
• Square Bar Roof Rack Options For a 2015 GMC Terrain With Factory Rails Removed
  For your 2015 GMC Terrain, we only have Thule square bars if you have factory rails. 2015 GMC Terrain Roof Rack by Thule - Thule SquareBar Evo Crossbars # TH712200 - Evo Raised Rail Feet for Thule Crossbars # TH710401 If you do not have rails, we have a Yakima roof rack that'll fit. 2015 GMC Terrain Roof Rack by Yakima - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter for Yakima # Y03541 - BaseClip Fit Kit for Yakima BaseLine Roof Rack...
  view full answer...
  
• Lowest Profile Roof Rack that Fits 2022 Outback Wilderness
  The lowest profile roof rack that fits your 2022 Subaru Outback Wagon is the Rhino Rack Stealthbar roof rack part # JA7970 which will only add right at 1-3/8 inches.
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Recommended Way to Carry a Kayak for a Ford F-150
  As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• What do I need to setup a Thule Hullavator on Yakima JetStream Crossbars on a 26 Toyota Highlander?
  Great choice Peter, that combo works very well together! Since you already have 60" Yakima JetStream crossbars # Y00428 and a Thule Hullavator # TH898 , you’re most of the way there. The key now is just getting the correct tower and fit kit for your 2026 Highlander roof type. If the Highlander has "Flush Rails" this is the correct fit kit # Y53TR Yakima SkyLine Roof Rack Towers for JetStream Crossbars - Qty 4 # Y66VR Yakima Landing Pad 28 If the Highlander has "No Rails" this is the...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Do You Have a Roof Rack for a 2017 Nissan Murano S?
  Yes, we do carry a crossbar system that will work with your bare-roof 2017 Nissan Murano S. For a complete system, you need the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06126 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - (optional for extra security) Yakima Same-Key System...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Parts Needed To Mount Yakima HD Bars To RSI Smartcap Evo Sport
  Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar.
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Recommended Ladder Rack And Roof Rack Combo For A 2024 Ford Maverick Hauling Ladders And Canoes
  Hey Rueben, Thule doesn't have a ladder rack fit for the 2024 Ford Maverick so you'll need to go with a different rack. The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 would be the best option since its tower height can be adjusted from 19" up to 30" tall from the top of the bedrails. To add on an additional crossbar to the roof of your Maverick you would need the following components: BaseClip Fit Kit # Y06180 BaseLine Towers # Y62TR HD Bar SL Adapter # Y03541 Yakima...
  view full answer...
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Availability of Roof Rack That Fits 2 Old Town Sportsman Autopilot 120 Fishing Kayaks
  Hey Philip! It looks like the kayaks are 37" wide so 74" for both. The Yakima HD Crossbars # Y01159 are 78" long and can be installed using the # TimberLine Towers # Y33TR and HD Bar Adapter # Y03541. However, the specs show these weigh 152 lbs each, is that correct? The weight limit of the feet/towers is 220 lbs so if they are that heavy a roof rack won't be an option. Your vehicle roof capacity may not be high enough to hold them either. If the total weight of your kayaks is 304 lbs...
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• Will HD Bar SL Adapter Kit Fit the Yakima SightLine Towers
  Hey Dan, thanks for reaching out! Yes, the HD Bar SL Adapter Kit # Y03541 will fit the newer gen SightLine Towers # Y64AR. Do you already have the Yakima HD Bars? If not, what is the year/make/model of your vehicle so I can make sure you get the right length?
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot Rails
  For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super Duty
  We can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
  How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible. If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car. To add this kit to your vehicle,...
  view full answer...
• Components Needed To Mount Yakima RoundBars On A 2024 Kia Seltos With A Naked Roof
  Hey Jason, Yes, you can get the Yakima BaseLine Roof Rack for Naked Roofs # Y64PJ without the crossbars, you'll just need to order each component separately: BaseLine Towers for Yakima Crossbars # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06130 (front clips) BaseClip Fit Kit # Y06132 (rear clips) If you need anything else or if you have factory rails let me know.
  view full answer...
• Yakima Jetstream Roof Rack for Use with Thule Hullavator TH898 on 2018 Toyota Highlander
  The Thule Hullavator load-assisted kayak carrier # TH898 will directly mount onto just about any roof rack bar shapes, including round, square, aero, elliptical, most factory crossbars, and most crossbars with top "T-slot" channels. Yakima Jetstream bars will work fine so long as they are long enough. The most important compatibility requirements for mounting the Hullavator are that the cross bars extend out past the rack legs and by no less than 4 -inches and that they be at least 24-inches...
  view full answer...
  
• Recommended Kayak Carrier for 2020 Mazda CX-5
  The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
  view full answer...
  
• Recommended Roof Rack For A 2021 Kia Seltos With A Naked Roof
  Yes there is, so for your 2021 Kia Seltos I recommend taking a look at the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 & # Y06132. The great part about this rack, apart from the 165-lbs weight capacity, is that it will also work great with naked roofs like what's on your 2021 Kia Seltos by using the DropHook clip holder. I have also included an installation video on...
  view full answer...
• Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak Carrier
  In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
  view full answer...
• Comparing Yakima Baseline and Skyline Towers on 2015 Mazda CX-5
  When comparing the height of each option, the lowest Yakima Roof Rack for your vehicle consists of the Yakima RoundBar SL Adapter # Y03536 to utilize your previous Yakima round bars, the BaseLine Towers # Y28TR, the BaseClip Fit Kit # Y06130 and # Y06132. Overall this system will be about an inch shorter than the Skyline tower and base option.
  view full answer...
• Will the Yakima SteelHead Roof Mounted Bike Carrier Fit Aero Crossbars on a 2017 Toyota Highlander
  In order to use the Yakima SteelHead Roof Mounted Bike Carrier on your 2017 Toyota Highlander you would need to install a round bar system like the Yakima Roof Rack System part # Y00408, part # Y53TR, part # Y03536, and part # Y00242 if you have flush side rails or the Yakima Roof Rack System part # Y00409, part # Y28TR, part # Y03536, and part # Y06130 if you have a bare roof. If you want to keep the roof rack you have now then I recommend selling the SteelHead and buying the Yakima...
  view full answer...
• Base Clips For Yakima Roof Rack Towers On A 2018 Toyota Corolla
  It looks like all of the Yakima roof racks that are confirmed to fit your 2018 Toyota Corolla use BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06170. To confirm, you can give me more information about your roof rack that you have and I will make sure this is the correct clip set. I have attached a demonstration video to show you how these clips install.
  view full answer...
• Will the Malone DownLoader Fit on Yakima Roof Rack Crossbars
  Yes, the Malone DownLoader # MPG114MD-351XL is designed to fit on virtually all available aftermarket crossbar shapes and most factory bars, so this would work well with a Yakima roof rack like the one for a 2016 Avalon that uses parts # Y00425, # Y28TR, # Y06130, # Y06131. The DownLoader is an awesome solution to help make loading and unloading your kayak a breeze, and the system comes with cam buckle load straps to help you secure the boat. I've linked some review videos of these parts...
  view full answer...
• Roof Rack Recommendation to Carry Thule Pulse Box on 2018 Toyota Highlander
  In order to carry the Thule Pulse Large Rooftop Cargo Box # TH615 on your 2018 Toyota Highlander you will need crossbars that are perpendicular to your vehicle body so that the box can be parallel with the vehicle body. I really like the Yakima JetStream roof rack system because the crossbars are higher quality with that aero-style design and the legs have adjustments so you get the best fit possible. I'm guessing you have a naked roof but in the event that you do have the flush mount rails...
  view full answer...
• Yakima Roof Rack Components Recommendation to Fit 2019 Mazda CX 5
  The Yakima Landing Pad 19 # Y00245 that you referenced has been confirmed by Yakima to fit the Skyline and Control Towers like you mentioned. Glad it worked for you as well! For the 2019 Mazda CX-5 Yakima recommends the BaseClip part # Y06130 and part # Y06154 when used with JetStream bars # Y00425 and BaseLine Towers part # Y28TR.
  view full answer...
• Yakima Roof Rack Landing Pad 16 Wont Line Up On 2019 Toyota Highlander
  There are two roof configurations on a 2019 Toyota Highlander, bare roof and flush side rails. The Landing Pad 16 part # Y00242 is designed for models with flush side rails. If you have a bare roof you need to use the BaseClip Fit Kit part # Y06130. I think you might be looking at the pre-drilled holes in the roof used to attach the flush side rails from the factory and if so these can't be used and you would have to use the rack for bare roof models. I have attached a video below of the...
  view full answer...
• Best Roof Rack and Kayak Carrier for a 2019 Hyundai Tuscon w/ Bare Roof
  I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier...
  view full answer...
  
• Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top Tent
  I would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Recommended Roof Rack to Use the Yakima SideWinder on a 2018 Toyota Highlander LTD
  I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071. If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130. For flush mount rails you would instead need the 50" JetStream Bars # Y00425,...
  view full answer...
• Recommended Roof Crossbars and J-Style Kayak Carrier for a 2018 Toyota Corolla
  We have just what you need for your 2018 Toyota Corolla! I recommend checking out the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, & the BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06130 & # Y06170. These crossbars will easily attach to your Corolla's naked roof, has a 165-lbs weight capacity, and will allow you to use a set of J-Style kayak carriers like the Thule Compass Kayak Roof Rack w/ Tie-Downs # TH890000. Since you're interested...
  view full answer...
• Rear Yakima Roof Rack Bar Sits Higher than Front Bar on a 2016 Toyota Avalon
  You will want the Yakima roof rack on your 2016 Toyota Avalon as level as possible, but due to the different strength points on a roof and the differing heights of the towers it isn't uncommon for crossbars to be a little out of level with each other. They shouldn't be so far out of level that is causes issues with accessories fitting though, which is the main concern. With all of that being said, it is always a good idea to double check your installation just to make sure you have everything...
  view full answer...
• Can Yakima SkyRise Tent be Used with 2018 Mazda CX-5 AWD
  The Yakima SkyRise Tent # Y07436 will work great on your 2018 Mazda CX-5 but you will need a roof rack with at least a 165 lb capacity. If the roof of your 2018 Mazda CX-5 has flush rails that run front to back you'd want the Yakima Jet Stream rack part numbers # Y00425, and # Y64AR, # Y39AR If you have a naked roof you'd want the part numbers # Y00425, # Y28TR, # Y06130, and # Y06154. If you have rails that run front to back that are raised up you'd want the Malone rack part # MPG215....
  view full answer...
• Roof Rack System Similar to the Yakima Whispbar for a 2017 Subaru Legacy
  I do have a similar roof rack system for your 2017 Subaru Legacy but the Yakima Whispbar Roof Rack System has since been discontinued in favor of the Yakima JetStream Roof Rack System. In order to mount the Yakima JetStream Roof Rack System to the roof of your vehicle you will want to use part # Y00426, part # Y28TR, part # Y06145, and part # Y06130. I have added a review video of this system for you as well.
  view full answer...
• Recommended Roof Rack For A 2019 Toyota Highlander To Carry A Thule Hullavator 898
  In order to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading, part # TH898, on the roof rack of your 2019 Toyota Highlander, the crossbars need to extend between 4" and 8" past the the towers/feet. My recommendation would be to go with a 60" crossbar for your roof rack. I have two roof rack recommendations for you. The first rack is for a Highlander with flush rails. It will consist of the following items: Yakima CoreBar Crossbars - Steel - Black...
  view full answer...
  
• Recommended Rack For 2016 Toyota Highlander For A Thule Hullavator And Rear Loading Kayak Carrier
  In order for you to carry two kayaks, one on a Thule Hullavator, part # TH898, and the other a rear loading kayak carrier, you will need longer crossbars. Your crossbars will also need to extend between 4" - 8" beyond the tower, foot, leg of your roof rack. You will not be able to use a factory roof rack with a Thule Hullavator. If your 2016 Toyota Highlander has flush rails, your recommended roof rack will consist of the following: Thule WingBar Evo Crossbars - Aluminum - Black -53"...
  view full answer...
• Paddleboard Carrier and Roof Rack Recommendation for 2017 Mazda CX-5
  The Yakima Paddleboard Carrier SUPDawg part # Y04075 that you referenced will be a great option, but let's get you set up with a roof rack on your 2017 Mazda CX-5 first. For that the Yakima aero bar roof rack that consists of part numbers # Y00425, # Y28TR, # Y06130, and # Y06154 is a confirmed fit and would work well. The bars of this give the least amount of wind resistance which means minimal wind noise.
  view full answer...
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Roof Rack that Fits 2019 Hyundai Santa Fe SEL with Naked Roof
  Yakima has their BaseLine roof rack part numbers # Y06151, # Y06154, # Y00409, # Y28TR, and # Y03536 as a confirmed fit for your 2019 Hyundai Santa Fe with a totally naked roof. This will give you a round crossbar roof rack that will be compatible with most roof rack accessories.
  view full answer...
• Roof Rack Kit For Carrying A Thule Hullavator On A 2024 Toyota Corolla Cross
  Hi Jennifer! You want 4" to 8" of crossbar after the tower in order for a Thule Hullavator # TH898 to not make contact with the vehicle when in the lowered position. Since you mentioned the roof on your 2024 Toyota Corolla Cross being narrow compared to the body, I would recommend going as wide as you can, just to be sure. With that said, I have 70" crossbar options listed below. You didn't mention if your Corolla Cross had flush mounted rails running from the front to the back or if you...
  view full answer...
• BaseClips for Yakima CoreBar Roof Rack for 2023 Toyota Corolla Cross
  Hey Siobhan, the complete Yakima Corebar roof rack for your 2023 Toyota Corolla is the part # Y58MB which does come with the bars you have and Baseline towers that you have. So the correct baseclips you need are the part # Y06135 and # Y06154 according to Yakima.
  view full answer...
• Recommended Kayak Carrier for 2020 Mazda CX-5
  The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
  view full answer...
  
• Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak Carrier
  In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
  view full answer...
• Best Roof Rack For 2025 Toyota Corolla Cross WIth Bare Roof
  The best roof rack for your 2024 Toyota Corolla Cross with a bare roof is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06153 - BaseClip Fit Kit # Y06154 I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the...
  view full answer...
• Recommended Roof Rack for a 2023 Hyundai Santa Fe w/ No Roof Rails
  To add a roof rack to your 2023 Hyundai Santa Fe with no rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06151 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06154 This roof rack has a 165 lbs capacity. I have attached...
  view full answer...
  
• Recommended Roof Rack for a 2019 Hyundai Santa Fe w/ a Naked Roof
  Yes, there is a roof rack that will fit your son-in-law's 2019 Hyundai Santa Fe, that doesn't have side rails. This mounts directly to the side of your roof without drilling and has more than enough capacity for a ski rack. You will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof...
  view full answer...
  
• Recommended Roof Rack for 2019 Hyundai Santa Fe with Naked Roof
  If your 2019 Hyundai Santa Fe features a completely naked roof without flush mounted rails that run front to back then I recommend the Yakima JetStream Roof Rack because of its extremely aerodynamic design that allows for both a quiet ride and a really sleek appearance on your brand new vehicle. I also really like the Yakima systems in particular because of their fitting process which consists of them actually installing and testing their roof racks on the vehicle before confirming a...
  view full answer...
• Replacement Claws for Yakima Roof Systems
  The claws in your picture look similar to the Replacement Large Claw Assembly for Yakima Railgrab item # Y80144. I have attached a graph showing what type of Yakima claws fit what kind of roof rack to assist you in matching up your rails to the correct claws. I have linked our selection of replacement claws. Yakima also makes a roof rack system for your 2019 Hyundai Sante Fe the roof rack Includes: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 Item # Y00425 BaseLine...
  view full answer...
  
• Roof Rack for 2020 Hyundai Santa Fe With Naked Roof
  Yes, since you have a naked roof on your 2020 Hyundai Santa Fe that is the information needed to get the right roof rack. That said, there is just one brand that makes a roof rack for your '20 Santa Fe that has a naked roof, which is Yakima. The parts for your Santa Fe will essentially be the same with the exception of the crossbar type, as you can choose from either round crossbars or aero crossbars. I definitely recommend going with the aero-shaped bars as they are going to be much quieter...
  view full answer...
• Yakima Roof Rack Components Recommendation to Fit 2019 Mazda CX 5
  The Yakima Landing Pad 19 # Y00245 that you referenced has been confirmed by Yakima to fit the Skyline and Control Towers like you mentioned. Glad it worked for you as well! For the 2019 Mazda CX-5 Yakima recommends the BaseClip part # Y06130 and part # Y06154 when used with JetStream bars # Y00425 and BaseLine Towers part # Y28TR.
  view full answer...
• Will Two Thule Hullavator Pro Carriers Fit on a 2020 Hyundai Santa Fe?
  The Hullavator is a very popular kayak carrier due to its awesome load-assist function. Many have asked if they can load two on their vehicle, but it's a rare few that can do so as it would require at least 57" crossbar length and a strong roof weight capacity to carry the heavy carriers and the kayaks. One would have to consider the roof rack weight plus the almost 80 lbs of the two carriers plus the kayak weight. For your 2020 Hyundai Santa Fe, you have a roof weight capacity of 220...
  view full answer...
• Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof
  Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
  view full answer...
• Parts Needed To Install Roof Rack On a 2023 Toyota Corolla Cross
  Here is a list of the parts needed to install a Yakima JetStream roof rack on your 2023 Toyota Corolla Cross. Yakima JetStream Crossbars - Aluminum - Silver - 50" Long # Y00428 BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06154 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06153 You can add the Yakima Same Key System # Y07208 to lock your roof rack to your Toyota. This kit included 8 lock cores, four of...
  view full answer...
• Roof Rack Recommendation for Bike Rack and Cargo Box on 2022 Toyota Corolla Cross with Naked Roof
  Thanks for reaching out! For your application we'll need to stick with the Yakima JetStream system since Thule doesn't have a fit for your 2022 Toyota Corolla Cross naked roof at this time (January 2023). The 50" JetStream crossbars will be a great size for fitting both the Thule FastRide Roof Bike Rack # TH95JV and Thule Force XT Sport Rooftop Cargo Box # TH6356B. Here are the parts you'll need for the complete roof rack system: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 BaseLine...
  view full answer...
• Can Yakima SkyRise Tent be Used with 2018 Mazda CX-5 AWD
  The Yakima SkyRise Tent # Y07436 will work great on your 2018 Mazda CX-5 but you will need a roof rack with at least a 165 lb capacity. If the roof of your 2018 Mazda CX-5 has flush rails that run front to back you'd want the Yakima Jet Stream rack part numbers # Y00425, and # Y64AR, # Y39AR If you have a naked roof you'd want the part numbers # Y00425, # Y28TR, # Y06130, and # Y06154. If you have rails that run front to back that are raised up you'd want the Malone rack part # MPG215....
  view full answer...
• What is the Best Way to Add a Roof Rack to a 2023 Toyota Corolla Cross w/out Rails?
  The best way to add a roof rack to your 2023 Toyota Corolla Cross without roof rails is with the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06154 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06153
  view full answer...
• Will the Thule Motion XT Cargo Box Fit on a 2021 Hyundai Santa Fe?
  Yes, the Thule Motion XT Rooftop Cargo Box # TH629706 will fit your 2021 Hyundai Sante Fe with a crossbar system. The Motion X will fit on top of your vehicle and allow you to access the rear hatch. If you need a roof rack, the parts you need depend on if you have factory flush rails or a naked roof on your vehicle. If you do not already have a roof rack, you will need to purchase one. If your vehicle has flush factory rails, I recommend the following parts: - Rhino-Rack Vortex Aero...
  view full answer...
• Bike Rack Recommendations for a 2005 Honda Pilot Without a Trailer Hitch
  There are three different ways to carry bikes on a vehicle and those are with a trailer hitch mounted bike rack, a rooftop mounted bike rack or a trunk mounted bike rack. Only hitch mounted and rooftop mounted bike racks are recommended for your 2005 Honda Pilot since bike rack manufacturers have determined it is not safe to attach a trunk mounted bike rack on your rear hatch. If you have a roof rack on your vehicle, then you could look into rooftop mounted bike racks like the Swagman...
  view full answer...
• Recommend Roof Rack for Mounting Two Hullavators on a 2023 Hyundai Santa Fe
  I have two options to mount a couple of Hullavators item # TH898 on your 2023 Hyundai Santa Fe. Which one you need completely depends on what is currently on your roof. There are two options one for a bare roof model and one with side rails. I have listed both options below: Naked Roof No Rails - Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine...
  view full answer...
• Do Yakima Roof Racks Fit 2023 Acura RDX
  So we were able to determine that the 2023 Acura RDX wasn't changed from the 2022 model and we then carried over the fits from the previous year. Sometimes one of the rack manufacturers does this first and since we know they did the correct research we know that other brands will also carry over even if they haven't had a chance to test it like with the Yakima Corebar roof rack part numbers # Y00421 # Y64AR, and # Y49AR that we have listed for your 23' RDX.
  view full answer...
• Paddleboard Carrier and Roof Rack Recommendation for 2017 Mazda CX-5
  The Yakima Paddleboard Carrier SUPDawg part # Y04075 that you referenced will be a great option, but let's get you set up with a roof rack on your 2017 Mazda CX-5 first. For that the Yakima aero bar roof rack that consists of part numbers # Y00425, # Y28TR, # Y06130, and # Y06154 is a confirmed fit and would work well. The bars of this give the least amount of wind resistance which means minimal wind noise.
  view full answer...

Do you have a question about this Roof Rack?