Replacement Claws for Yakima Roof Systems

Question

Question:

Will any of these claws in the picture work for Hyundai 2019 Santa Fe with naked roof?

asked by: Ellie

0

Expert Reply:

The claws in your picture look similar to the Replacement Large Claw Assembly for Yakima Railgrab item # Y80144. I have attached a graph showing what type of Yakima claws fit what kind of roof rack to assist you in matching up your rails to the correct claws. I have linked our selection of replacement claws.

Yakima also makes a roof rack system for your 2019 Hyundai Sante Fe the roof rack Includes:

Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 Item # Y00425

BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR

BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06151

BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06154

expert reply by: Jerred H

0

yakima claws chart for rail fitment
(click to enlarge)

customer pic of claws for yakima
(click to enlarge)

Answer 1

We do carry replacement parts for the Yakima Railgrab foot. For the claw base and nut you would want the part #Y8880279. The medium claws are no longer available. For the claws with pin adapters you would want the part #Y8880201. For replacement…

view full answer...

Answer 2

The Yakima Railgrab will Medium Claws for Yakima RailGrab Roof Rack Towers - Qty 2 #Y8880205 are what I believe are the correct fit for your 2018 VW Tiguan. I've attached a photo that shows the first three styles being the smaller fit, the next…

view full answer...

Answer 3

I checked with Yakima and found a chart that will help you determine which size claw you'll need to use with your Yakima Railgrabs. The top three use the small claw #Y80145, the middle two use the medium claw #Y8880205, and the bottom two use the…

view full answer...

Answer 4

Based on the picture and dimensions of your raised rails the correct claw from the RailGrab system you would need to use the medium claw which unfortunately a size that was discontinued. Maybe you could find it elsewhere and it was part number…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Rick, I went through the install instructions of the Roadmaster Direct Connect base plate kit part #RM97RR and you actually trim out a whole in the shutters and reinstall them. They are not totally removed. Do you have a tow bar already?

view full answer...

Answer 10

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Replacement Claws for Yakima Roof Systems

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching