See what our Experts say about this Yakima Roof Rack

• Is Weight Capacity of Yakima CoreBar Crossbars Per Bar or for Pair
  The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity. Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle.
  view full answer...
• Highest Capacity Roof Rack for a 2018 Subaru Outback Touring
  The Thule roof racks available for the 2018 Subaru Outback have a capacity of 110 pounds no matter which bar style is being used. There are roof racks that are rated higher though so to maximize the capacity of the vehicle (which according to the owner's manual is 176 pounds on models that have factory side rails that run front to back or 150 pounds for models with crossbars integrated into the rails). All of the Yakima roof rack options are rated for 165 pounds. For a Yakima roof rack...
  view full answer...
• Will the Gutter Mounts # RL150S13-3 Attach to a Rhino-Rack Pioneer Platform?
  I went ahead and reached out to my contact at Rhino-Rack, and she confirmed that the Rhino-Rack Roof Rack Legs - Gutter Mount - 5-15/16" Tall # RL150S13-3 will technically attach to a Rhino-Rack Pioneer platform. However, Pioneer Platforms are customized to fit certain roof dimensions, and I cannot recommend which platform you will need for your vehicle. In order to give you the proper fitment and recommendation, please feel free to respond to this answer with the year/make/model/roof...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Can I Convert a Hullavator 897XT to Work w/ Yakima CoreBar Crossbars?
  I am sorry the older Hullavator 897XT you own can not be converted to mount on Yakima CoreBar Crossbars like item # Y00421 because there is no t-slot. I confirmed this information with Thule. The only solution I have for you is to upgrade to the new Hullavator item # TH898 you were looking at.
  view full answer...
• What is Advantage of Top Channel on Yakima JetStream Bar over Core Bar
  The top channel on the JetStream bars have the advantage of offering an easier/cleaner way to attach roof rack accessories. A lot of roof rack accessories are now being made to attach to a channel on the top of the bar. The CoreBars are a less expensive and still a really great bar but it comes down to what type of attachment you prefer. If you let me know what vehicle you have I can help get all of the parts together to install either style of rack on your vehicle.
  view full answer...
• Roof Rack and Kayak Load Assist Recommendation for 2011 Chevy Equinox with Raised Side Rails
  There is a solution for you, but the issue with the BoatLoader EVO the crossbar spread as well as its 80 lb weight capacity, which is less than your 87 lb fishing kayak. Instead, for your 2011 Chevy Equinox with raised side rails I recommend the Rhino-Rack Roof Rack, which will give your Equinox a very functional, durable rack that will allow you to use a load assist. This roof rack uses aero bars and consists of: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack SX Series...
  view full answer...
  
• Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point Roof
  The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
  view full answer...
• Recommended Yakima Round Bars for a 2025 Toyota RAV4 W/ Factory Flush Rails
  Hey A, for your 2025 Toyota RAV4 with factory flush rails you can use the Yakima SkyLine Roof Rack for Fixed Mounting Points # Y55FB which includes the Yakina round bars, the towers, and the round bar adapter. These towers will attach directly to your flush rails on your RAV4, so you won't need anything else to get it to work. Let me know if there is anything else I can do for you!
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Recommendation on a 1 or 2 Kayak Carrier for a 2010 Subaru Forester
  If you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches. I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the...
  view full answer...
• Does Thule DockGrip Kayak Rack Fit 2018 Subaru Outback Limited Factory Crossbars
  Yes, I checked with Thule and for the factory crossbars of your 2018 Subaru Outback Wagon the DockGrip part # TH895 is a confirmed fit and will work well.
  view full answer...
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• Which Rook Rack Would be the Most Quiet on My 2024 Lexus LX600 F Sport?
  Hello David, Congrats on the new Lexus, I really like the new grill designs I have been seeing on the SUV's. I understand your concern with the noise as some systems can be quite noisy. When it comes the the rail systems you definitely get what you pay for. I am showing that the 2024 Lexus LX 600 comes with the flush mounted rails (please refer to the image that I attached) so you will want the Thule WingBar Evo Roof Rack for Flush Rails - Aluminum - Black - Qty 2 # TH49GA (for silver...
  view full answer...
• Can I Use Yakima CoreBars On A 2024 Hyundai Tucson With Flush Rails?
  Hello Mike. According to Yakima, the SightLine Towers are the only option for the 2024 Hyundai Tucson. You can use the Corebars, and a 50" bar is recommended for the 2024 Tucson. You will also need the SightClip 25 # Y27AR and a set of SightLine Towers # Y64AR. We do have some videos showing installation of the SightLine roof rack. I have provided links to a couple different videos for you below.
  view full answer...
• Bike Rack Recommendation for a 2017 Honda Civic
  Hello Tonya - Thanks so much for letting me know that your 2017 Honda Civic is a 4-door sedan. Once I know if you have a center exhaust on your vehicle, I can go ahead and recommend some great 2-bike racks for you!
  view full answer...
• Is Thule Hullavator Kayak Carrier Compatible with Yakima CoreBar Crossbars
  The Thule Hullavator Pro Kayak Carrier # TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit # TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work correctly and avoid contacting your vehicle. I have attached a photo showing how to make sure your CoreBar is long enough. If you happen to need longer CoreBar crossbars we have them available here: 50" - # Y00421 60" - # Y00422 70" - # Y00423 80" - # Y00424
  view full answer...
  
• Loadstop Compatibility With Yakima CoreBar And Universal Mighty Mounts
  Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
  view full answer...
• Roof Rack for 2017 Chevy Spark
  There is a roof rack option for your 2017 Chevy Spark but the SportRack # SR1002 is not a fit. Instead, I recommend an option from Yakima. This rack consists of the Yakima CoreBar Crossbars # Y00421, BaseLine Towers # Y28TR, and Fit Kit # Y06124; you can lock this roof rack with SKS Lock Cores # Y07204. This will give you an aero roof rack that helps reduce the amount of wind noise you might otherwise encounter.
  view full answer...
  
• Parts Needed to Mount Yakima Space Cadet Cargo Box on Roof of 2008 Honda Odyssey
  In order to mount your Yakima Space Cadet Cargo Box to the roof of your 2008 Honda Odyssey you will indeed need to add crossbars. For your Odyssey that features the factory raised side rails I recommend the Yakima CoreBar System. This roof rack consists of # Y00421 for the two 50 inch CoreBar Crossbars and # Y33TR for the TimberLIne Towers that will attach to the side rails. I have attached a short video demonstration on this roof rack that you can check out. As long as you still have...
  view full answer...
• Difference Between Yakima CoreBar and JetStream Roof Rack Crossbars
  There are a couple of differences between the two. The JetStream bars like # Y00425 are made of extruded aluminum while the CoreBars such as the # Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has a higher capacity. The primary difference is that the JetStream bars feature the T-Slot channel at the top that allows quick and easy accessory installation, while accessories used with the CoreBars would need to clamp around the crossbar. The...
  view full answer...
• Will Thule Hull-A-Port Roof Kayak Carrier Fit Yakima Core Bar Roof Rack
  Yes, the Thule Hull-A-Port J-style kayak carrier # TH834 will fit fine on Yakima Core Bar roof rack crossbars. These bars, such as 50-inch set # Y00421, have an aero profile that is fully compatible with the hardware on the Hull-A-Port.
  view full answer...
• Parts Needed to Swap the Yakima CoreBar Crossbars from an Acura MDX to a 2022 BMW X6
  Assuming you're wanting to use the Yakima CoreBar Crossbars # Y00421 you're looking at, then yes you're just going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06179, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06161 as well as the BaseLine Towers for Yakima Crossbars # Y28TR.
  view full answer...
  
• What Crossbars Do I Need for a Thule Motion XT XL on My 2017 Lexus GX 460?
  In order to mount the Thule Motion XT XL # TH629806 on the factory flush rails of your 2017 Lexus GX 460, I recommend the Yakima CoreBar Crossbars - Steel - Black - 50" # Y00421. One of the great features of the CoreBars is that it combines the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. The Thule Motion XT XL will be able to clamp onto the CoreBars. For a complete roof rack system for your 2017 Lexus GX 460, I recommend these...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
  How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible. If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car. To add this kit to your vehicle,...
  view full answer...
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Components Needed To Mount Yakima CoreBar Crossbars To A 2023 Toyota Tacoma
  Hey Mike, In order to mount your Yakima CoreBar crossbars on your 2023 Toyota Tacoma you'd need the following components depending on the following factors: Access Cab - Naked Roof: BaseLine Towers # Y28TR BaseClip Fit Kit # Y06128 BaseClip Fit Kit # Y06145 Double Cab - Naked Roof: SkyLine Towers # Y53TR Landing Pad 24 # Y74FR Double Cab - Raised Rails: TimberLine Towers # Y33TR
  view full answer...
• Do 2020 Hyundai Palisade And Kia Telluride Use The Same Roof Rack Crossbars?
  Hello Terry, thanks for reaching out. It would be possible to use the same crossbars on a 2020 Hyundai Palisade and a 2020 Kia Telluride. The fit kits would be different, but it would be possible, for example, to use the 60" Yakima JetStream bars # Y00426 and BaseLine Towers # Y28TR on both vehicles. Here are the fit kits you would need for each one: 2020 Hyundai Palisade (without factory flush rails) - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - BaseClip Fit...
  view full answer...
• Carrying 19 Foot Canoe on Yakima Overhaul HD Ladder Rack on 2021 Toyota Tacoma
  It depends on how you're installing it! I installed two versions of the Yakima Overhaul HD on a 2021 Toyota Tacoma with a 5' bed. The OverHaul HD is always my favorite recommendation since it's a super solid ladder rack that looks and works perfectly on the Tacoma. The version that mounts to the utility tracks # Y01151-5868 has a maximum crossbar spread of 40". You can see that measurement around the 3:20 minute mark in the video I attached below. For the version that installs onto tonneau...
  view full answer...
• Correct Yakima SKS Lock Core Kit for Yakima HD Roof and OverHaul HD on a 2016 Toyota Tacoma
  That is an excellent setup and I know you'll be happy with that on your 2016 Toyota Tacoma. I'll list out all of the parts you'll need (just so you have them all in one place) but I did want to say while the OverHaul HD does come with locks, we don't have a way to choose the correct lock cores that come in the packaging so your best bet is to go with the 6-lock core SKS # Y07206 because it gives you matching cores for the 2 needed for the ladder rack and then the 4 needed for the roof rack. With...
  view full answer...
• Recommended Roof Rack for a 2021 Hyundai Palisade
  It does not. I checked with Thule and they list a Thule WingBar Edge Crossbar item # TH29RE and a Edge Flush Rail Feet item # TH89SC as parts fitting a 2021 Hyundai Palisade with side rails. You would need the Thule 186008 to install this system and I can not find that part outside of Thule's website where it is unavailable for purchase. I have listed two comparable Yakima options below. These are similar roof racks for your 2021 Hyundai Palisade. They do not overhand the side of your...
  view full answer...
• Roof Rack and Extended Crossbars to Mount Two Hullavators on a 2020 Hyundai Palisade
  Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item # TH898. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06138 Yakima JetStream Crossbar - Aluminum...
  view full answer...
• Which Yakima Roof Rack System For 2021 Toyota Tacoma and Shell
  To mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers # Y28TR, Round 48" Crossbar # Y8810021, Round Bar Adapter # Y03536, and Base Clip Fit Kit # Y06128 if you are mounting the crossbar on the rear of the vehicle, or Base Clip Fit Kit # Y06145 if you are mounting the crossbar on the front of the vehicle. For your shell you can use your existing Yakima Round Crossbars or Round 48" CrossBars for Yakima Roof Rack System # Y00408. In addition you will...
  view full answer...
• Will Yakima OffGrid Cargo Basket Fit on 2018 Toyota Tacoma Roof?
  Absolutely! The Yakima OffGrid Cargo Basket # Y07138 is 44" long by 40" wide. From my experience with the Tacoma and some research, the roof size is about 60" long and 52" wide on the double cab. The usual aftermarket roof rack crossbars for the 2018 Toyota Tacoma like # Y00425 are 50" long. This means the Yakima OffGrid will definitely fit on your roof. I attached my video review and install of this rack on a 2020 Toyota Tacoma. It's also a double cab which is an extra point for you since...
  view full answer...
• Yakima Roof Rack Recommendation for Cab and Camper Shell on 2022 Toyota Tacoma
  For a Yakima roof rack system on the cab and camper shell of your 2022 Toyota Tacoma I recommend going with the JetStream crossbars. I'll break down what parts you need for each section so it's easier to know what is paired together. Truck Cab 50" JetStream Bars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06145 BaseClip - # Y06128 Camper Shell 50" JetStream Bars - # Y00425 60" Tracks - Y01135 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you'll need 2 of these) I also recommend...
  view full answer...
  
• Roof Rack Recommendation for Carrying Kayak on a 2014 Nissan Juke
  First you'll need a roof rack on your 2014 Nissan Juke. For this I suggest the Yakima system that consists of: 50 inch CoreBars - # Y00421 BaseLine Towers - # Y28TR Fit Kits - # Y06145 and # Y06138 Then to carry the kayak the Thule DockGrip # TH895. The DockGrip holds your kayak using saddles and also includes the bow and stern tie-downs you'll need. To make it easier to connect the tie-downs use the Thule Quick Loops # TH530.
  view full answer...
• Will Yakima Q Towers Fit a 2009 Honda Fit
  I contacted Yakima directly and they informed me that the older Q Towers will not fit the 2009 Honda Fit. You will need to rebuild your tower, though an older Yakima Round Bar will still be useable. To replace the roof rack for your vehicle, you'll need: - Yakima BaseLine Towers, part # Y28TR - RoundBar SL Adapter for Yakima Towers, part # Y03536 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06145 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06153 Note that you'll need both...
  view full answer...
• Yakima Roof Rack Components Fit HD Bar Setup on 2020 Toyota Tacoma with Naked Roof
  Yakima does have an HD roof rack that fits your 2020 Toyota Tacoma with a naked roof but the correct towers for your vehicle are the Baseline towers and not the Skyline. What you would need is the following components # Y01156, # Y28TR, # Y03541, # Y06145, and # Y06128. The fit kit you mentioned does not fit your truck. Since you already have the bars you may not need the part # Y01156 as well.
  view full answer...
• Roof Rack System Similar to the Yakima Whispbar for a 2017 Subaru Legacy
  I do have a similar roof rack system for your 2017 Subaru Legacy but the Yakima Whispbar Roof Rack System has since been discontinued in favor of the Yakima JetStream Roof Rack System. In order to mount the Yakima JetStream Roof Rack System to the roof of your vehicle you will want to use part # Y00426, part # Y28TR, part # Y06145, and part # Y06130. I have added a review video of this system for you as well.
  view full answer...
• Recommended Roof Rack for a 2024 Hyundai Palisade w/out Rails
  We do have a set up that will attach to your 2024 Hyundai Palisade even though you do not have roof rails. This roof rack has a 165 lbs capacity and it does not extend past the mounting legs. It is the roof rack by Yakima and it includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• How do I Install a Set of Yakima Cross Bars onto a 2017 Toyota Tacoma Access Cab?
  In order to mount a set of Yakima Round Bars onto a 2017 Toyota Tacoma, you'll need the following clips and tower pieces: BaseLine Towers for Yakima Crossbars - Naked Roofs, part # Y28TR RoundBar SL Adapter for Yakima BaseLine Towers - part # Y03536 2x Base Clip Fit Kit for Yakima BaseLine Roof Rack Towers Qty 2- Part # Y06145 Note that you will need TWO (2) of the Clip Fit Kit, part # Y06145 in order to complete this installation. I've included a video of this installation so you can...
  view full answer...
• Solution for Transporting Kayak on 2017 Toyota Tacoma with Extang Encore Tonneau Cover Installed
  I have a couple possible solutions for you to transport your kayak with your 2017 Toyota Tacoma, however there is not a standard ladder rack available that is compatible with the Extang Encore Tonneau Cover. This is because the hardware for the Encore Tonneau Cover partially covers the top of the bed rails and any ladder rack will either require access to the inside of the bed rails or complete access to the stake pockets. The first option for your setup is to add a rail system and crossbars...
  view full answer...
• Lowest Profile Roof Rack For 2021 Hyundai Palisade
  It depends on what kind of roof you have on your 2021 Hyundai Palisade. If you have the the raised side rails you can use this kit that uses the Yakima Jetstream Crossbars # Y00425 The Ridgeline Towers # Y00145 and the ridgeclip # Y89FR. This leaves about an inch or so from where your sunroof is when it's open. If you have a naked roof, you can get these crossbars # Y00426, baseline towers # Y28TR and these two baseclip kits # Y06145 and # Y06138. This will be just above your sunroof when...
  view full answer...
• Roof Rack to Fit a 2018 Toyota Tacoma with Fixed Mounting Points
  If you definitely want a Yakima roof rack then the clamp-style attachment is all that is available at this time. For their system I recommend CoreBar system using BaseLine towers # Y28TR, fit kits # Y06145 and # Y06128, and then either the 50 inch, part # Y00421, or 60 inch, part # Y00422, crossbars. Since your 2018 Toyota Tacoma has the fixed mounting points there are Rhino-Rack systems that fit. I recommend the Vortex Aero bars, part # RRVA126B-2, with # RRRLT600 legs, and # RRQMFK08-2...
  view full answer...
• Rack for Rooftop Tent with Tonneau Cover for 2017 Toyota Tacoma
  The best way to mount a roof-top tent to your 2017 Toyota Tacoma with a Truxedo LoPro tonneau cover is using a roof rack like Yakima's CoreBar Crossbars Roof Rack System: # Y00421, # Y28TR, # Y06145, # Y06128. With the way your tonneau cover secures to your bed and the lack of stake-pockets on the Tacoma there isn't a ladder rack available for your Tacoma that works together with your tonneau. I like the CoreBar system because it has a high capacity and it looks good. One thing that...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for Two Kayaks on 2019 Subaru Legacy
  While we do have a roof rack and kayak carrier that will work for both of your Perception Tribe 11.5 kayaks the Malone SaddleUp Pro Truck Bed Kayak Carrier # MPG1001 is only designed for a single kayak and also would not fit a Malone Versa roof rack. For a roof rack I highly recommend the Yakima CoreBar system because it offers a combination of superior functionality, durability and looks. This roof rack is a fit for your 2019 Subaru Legacy so long as it is the Sedan model and is made...
  view full answer...
• Roof Rack Selection for 2017 Nissan Juke for Roof Bike and Kayak Carrier Installation
  The various roof racks we have to fit your 2017 NIssan Juke with a bare roof do indeed have weight ratings and bar spreads that vary from product to product. All racks are shown on the page I linked for your reference. In general, a wider bar spacing provides greater stability for whatever is attached to the rack, whether that's your bike rack or your kayak. Wider bar spacing simply gives you a potentially steadier setup. For kayak transport 24-inch bar spacing is considered the minimum...
  view full answer...
  
• Most Factory Looking Roof Rack for a 2024 Hyundai Palisade w/out Roof Rails
  Yes, there is a roof rack for your 2024 Hyundai Palisade that won't overhang the mounting legs. It is the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06138
  view full answer...
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Do You Have a Roof Rack for a 2017 Nissan Murano S?
  Yes, we do carry a crossbar system that will work with your bare-roof 2017 Nissan Murano S. For a complete system, you need the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06126 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - (optional for extra security) Yakima Same-Key System...
  view full answer...
• Do 2020 Hyundai Palisade And Kia Telluride Use The Same Roof Rack Crossbars?
  Hello Terry, thanks for reaching out. It would be possible to use the same crossbars on a 2020 Hyundai Palisade and a 2020 Kia Telluride. The fit kits would be different, but it would be possible, for example, to use the 60" Yakima JetStream bars # Y00426 and BaseLine Towers # Y28TR on both vehicles. Here are the fit kits you would need for each one: 2020 Hyundai Palisade (without factory flush rails) - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - BaseClip Fit...
  view full answer...
• Kayak Carrier Recommendation for Hobie Mirage Compass Fishing Kayak
  Since your Hobie Mirage Compass fishing kayak weighs 87 lbs you're either going to have to use a post-style carrier like the Yakima BigStack # Y04041 or use 2 sets of a J-Style carrier like the etrailer J-Style Kayak Carrier # e98878. I recommend going with 2 of the J-Styles simply because it will be easier to load an individual kayak on each one, especially with your heavier kayak. If you don't already have a roof rack then I recommend using a Yakima CoreBar roof rack. The correct parts...
  view full answer...
• Recommended Roof Rack for a 2021 Hyundai Palisade
  It does not. I checked with Thule and they list a Thule WingBar Edge Crossbar item # TH29RE and a Edge Flush Rail Feet item # TH89SC as parts fitting a 2021 Hyundai Palisade with side rails. You would need the Thule 186008 to install this system and I can not find that part outside of Thule's website where it is unavailable for purchase. I have listed two comparable Yakima options below. These are similar roof racks for your 2021 Hyundai Palisade. They do not overhand the side of your...
  view full answer...
• Roof Rack and Extended Crossbars to Mount Two Hullavators on a 2020 Hyundai Palisade
  Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item # TH898. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06138 Yakima JetStream Crossbar - Aluminum...
  view full answer...
• 2023 GMC Acadia Roof Rack and Cargo Box Recommendations
  The absolute best roof rack for your 2023 GMC Acadia with the bare roof is the Yakima BaseLine FX because it has a nice factory look but is also more robust so you get a great looking system that's also stronger. Here are the parts you'll need: - BaseLine FX Crossbars # Y59UV - Fit Kits # Y06138 and # Y06132 - Lock Core Kit # Y07204 (optional) If you were planning on using this for a cargo box then I highly recommend the Yakima SkyBox NX 18 # Y45AV. I really like this box because it...
  view full answer...
• Roof Rack Recommendation for Carrying Kayak on a 2014 Nissan Juke
  First you'll need a roof rack on your 2014 Nissan Juke. For this I suggest the Yakima system that consists of: 50 inch CoreBars - # Y00421 BaseLine Towers - # Y28TR Fit Kits - # Y06145 and # Y06138 Then to carry the kayak the Thule DockGrip # TH895. The DockGrip holds your kayak using saddles and also includes the bow and stern tie-downs you'll need. To make it easier to connect the tie-downs use the Thule Quick Loops # TH530.
  view full answer...
• Recommended Roof Rack for a 2024 Hyundai Palisade w/out Rails
  We do have a set up that will attach to your 2024 Hyundai Palisade even though you do not have roof rails. This roof rack has a 165 lbs capacity and it does not extend past the mounting legs. It is the roof rack by Yakima and it includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Lowest Profile Roof Rack For 2021 Hyundai Palisade
  It depends on what kind of roof you have on your 2021 Hyundai Palisade. If you have the the raised side rails you can use this kit that uses the Yakima Jetstream Crossbars # Y00425 The Ridgeline Towers # Y00145 and the ridgeclip # Y89FR. This leaves about an inch or so from where your sunroof is when it's open. If you have a naked roof, you can get these crossbars # Y00426, baseline towers # Y28TR and these two baseclip kits # Y06145 and # Y06138. This will be just above your sunroof when...
  view full answer...
• 2019 GMC Acadia Roof Rack and Kayak Carrier Recommendations for 2 Kayaks
  The Yakima JetStream roof rack system is a great option for the naked roof on your 2019 GMC Acadia: 50" JetStream Crossbars - # Y00425 BaseLine Towers - # Y28TR BaseClip Fit Kit - Kit # Y06138 and Kit # Y06132 Lock Core Kit - # Y07204 (optional) The note about not carrying something side-by-side actually just refers to surf/sail/paddleboards and doesn't apply to kayaks. If you don't already have a kayak carrier I really like the Yakima JayLow # Y04073 which comes with tie-downs for 1...
  view full answer...
• 2018 Mazda CX-9 Roof Rack For A Naked Roof
  If you have what we call a naked roof, meaning no raised rails or flush rails, you cannot choose where to place the rack on the roof of your 2018 Mazda CX-9. Here is a setup for your car on a naked roof. The rack would consist of three separate parts; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06138, BaseClip...
  view full answer...
• Roof Rack Selection for 2017 Nissan Juke for Roof Bike and Kayak Carrier Installation
  The various roof racks we have to fit your 2017 NIssan Juke with a bare roof do indeed have weight ratings and bar spreads that vary from product to product. All racks are shown on the page I linked for your reference. In general, a wider bar spacing provides greater stability for whatever is attached to the rack, whether that's your bike rack or your kayak. Wider bar spacing simply gives you a potentially steadier setup. For kayak transport 24-inch bar spacing is considered the minimum...
  view full answer...
  
• Roof Rack For 2021 Nissan Murano With Naked Roof For Thule Hullavator
  We can get your 2021 Nissan Murano with a naked roof set up with a roof rack so you can use the Thule Hullavator Pro Kayak Carrier # TH898. What you will need is a roof rack from Yakima, and I verified the exact parts that will fit your '21 Murano, which are the following: - Yakima JetStream Crossbars # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06138 - BaseClip Fit Kit # Y06126 This will allow you to carry and use the Hullavator with ease, and gives...
  view full answer...
• Most Factory Looking Roof Rack for a 2024 Hyundai Palisade w/out Roof Rails
  Yes, there is a roof rack for your 2024 Hyundai Palisade that won't overhang the mounting legs. It is the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06138
  view full answer...
• Roof Rack Recommendation for 2020 Hyundai Palisade With No Rails or Crossbars
  Although we don't offer a roof rack option that would provide the side rails, we do offer roof rack options that would work for your 2020 Hyundai Palisade. For a Yakima round bar roof rack, you'd need the following parts: • Yakima 58 inch round crossbars, part # Y00409 • Yakima BaseLine Towers, part # Y28TR • Yakima SL Adapters, part # Y03536 • Yakima Base Clips # Y06145 • Yakima Base Clips # Y06138 You might want to consider going with an aero-style crossbar, however. The round bars...
  view full answer...
• Roof Rack And Canoe Carrier For A 2020 Hyundai Palisade With A Naked Roof
  For your 2020 Hyundai Palisade, we do have a couple of options for a roof rack. The first option you can use is the Yakima JetStream Crossbars # Y00426 with the towers # Y28TR, and the fit kit # Y06145 & # Y06138. These cross bars are rated for 165lbs, and measure 60" long. These cross bars are aerodynamic, have a t-track channel for roof mounted accessories, and will provide a quiet, low-profile option that will work great with your Palisade. The other option you can choose from is...
  view full answer...
• 2023 GMC Acadia Roof Rack Recommendation to Install Thule Hullavator Pro Kayak Carrier
  I'd be more than happy to help you get the Thule Hullavator Pro Kayak Roof Rack # TH898 installed on your 2023 GMC Acadia! It looks like your Acadia comes with either a naked roof or raised rails so here are the parts I recommend using for either roof style: Naked Roof: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - Fit Kits # Y06138 AND # Y06132 - Lock Core Kit # Y07204 (optional) Raised Rails" - 50" JetStream Crossbars # Y00425 - TimberLine Towers # Y33TR - Lock...
  view full answer...
• Fitment of 2 Rhino-Rack Kayak Carriers # S512-S512X to Transport 4 Kayaks on a 2022 Hyundai Palisade
  Yes! You can use 2 sets of the Rhino-Rack Kayak Carrier # S512-S512X to transport 4 kayaks on your crossbars. Since one of these sets takes up roughly 20" of crossbar space, you need to have al least 40" of usable crossbar length on your roof rack to accommodate 2 of the # S512-S512X. You do not need to worry about additional straps because the carriers come with all the straps you need. If you need a compatible crossbar system with the length you need, the parts you need depend on if...
  view full answer...
• Is There a Yakima Roof Rack for a 2021 Nissan Murano with Bare Roof
  I checked with Yakima and was able to confirm they do indeed offer roof rack options for a model with bare roof, the Yakima JetStream Crossbar System part # Y00425, part # Y28TR, part # Y06126, and part # Y06138 is what I recommend. This is their flagship system with aero bars for less wind noise, top channels for accessories, and custom fit clips for a sleek look.
  view full answer...
• What Do I Need to Mount a Cargo Box on a 2020 Hyundai Palisade?
  In order to have a cargo box on your 2020 Hyundai Palisade, you will need a roof rack system with crossbars in order for you to mount the box and cargo. Compatible systems depend on whether your vehicle has a bare roof or flush factory side rails. If your vehicle has a bare roof, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine...
  view full answer...
• Recommended Roof Rack for a 2020 Hyundai Palisade
  The roof rack I recommend for a 2020 Hyundai Palisade is will be dependant on the roof type. If you have flush side rails then I recommend the Thule WingBar Evo Crossbar System part # TH711420, part # TH460R, and part # THKIT4093. If you have a bare roof then I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06145, and part # Y06138. These are both top of the line systems with custom fits and aero shaped crossbars for the least wind resistance.
  view full answer...
• What Roof Rack do You Recommend for a 2020 Hyundai Palisade with a Bare Roof?
  Fortunately, we do carry roof rack systems that are compatible with your bare roof on your 2020 Hyundai Palisade. For this system, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06145 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - (Optional for extra security) Yakima...
  view full answer...

Do you have a question about this Roof Rack?