See what our Experts say about this Yakima Roof Rack

• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top
  Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
  view full answer...
• What Does The Yakima TimberLine Roof Rack for Raised Rails Y39YD Come With?
  Hello Alexander, thanks for reaching out. The Yakima TimberLine Roof Rack for Raised Rails part # Y39YD is a full roof rack system, and this is the correct fit for the 2025 Kia Sorento. It comes with four TimberLine Towers and two 50" JetStream crossbars. If you want to do a larger crossbar, it is possible, we just wouldn't offer it as a kit. The next size up for the Yakima Aero bars is a 60". So all you would need is the four pack of TimberLine Towers part # Y33TR, and a set of 60" crossbars...
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• How To Carry Skis and Snowboards on a 2017 Lexus NX 200t With Flush Side Rails
  So long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis. For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories. For a roof rack mounted ski carrier, I recommend the Yakima FatCat...
  view full answer...
• Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
  Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
  view full answer...
• Will Malone SteelTop Roof Rack Fit 2025 Subaru Outback
  Hi John; is your 2025 Outback the Wilderness model? The Malone SteelTop Roof Rack # MPG203 only fits the rails on the Wilderness. This will not fit the factory rails on the regular Outback models. If that is what you have, let me know in the comments below and I can see what else is available. Are you looking for a specific crossbar length?
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Roof Rack for 2018 Jeep Wrangler JL Unlimited Hard Top to Carry Thule Hullavator Pro Kayak Carrier
  There are a couple options for a roof rack on your 2018 Jeep Wrangler JL Unlimited with a hard top, from Yakima and Thule, with both allowing you to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The parts you need for the Yakima roof rack consist of: - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 6 # Y00226 The parts you need for the Thule roof rack consist of: - Thule WingBar Evo Crossbars...
  view full answer...
• Parts Needed to Carry 3 Bikes or 3 Longboard Surfboards with a 2018 Honda Civic
  To transport the 3 longboards on the roof of your 2018 Honda Civic I recommend going with the Yakima JetStream crossbars system but with longer bars to accommodate all of your boards. Since the max amount of boards you can stack on a carrier is 2 we have to make sure there is enough room to place the longboards side by side. For a roof rack use the following: 60" JetStream Crossbars # Y00426 BaseLine Towers - # Y28TR Fit Kit - # Y06182 Fit Kit - # Y06183 Then for carriers I recommend...
  view full answer...
• Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
  While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
  view full answer...
• Can I Use the Thule Hullavator # TH898 with the Yakima JetStream Crossbars and Lock Cores?
  I just went ahead and looked up your orders and confirmed that you recently ordered the Yakima Same Key System (SKS) Lock Cores (QTY 4) # Y07204, the Yakima TimberLine Towers # Y33TR, and the 50" JetStream Crossbars # Y00425. The lock cores that you purchased install into the TimberLine towers and not into the end caps of the JetStream crossbars themselves. With that being said, the Thule Hullavator # Y00425 is compatible with the JetStream crossbars. It is important to note, though,...
  view full answer...
  
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• What Length/Type Of Crossbar For Mounting Two Hullavators On 2025 Subaru Outback Wilderness?
  Hey Carol, I can definitely help with that! You will need to go with an extra long crossbar to accommodate two of the Thule Hullavators # TH898 on your 2025 Subaru Outback Wilderness, but it can be done. The best roof rack for this will be a Yakima JetStream rack since the design of their crossbars allows longer bars to work. Each Hullavator requires 28-1/2" of bar space so a 60" crossbar will do great. Here are the parts you need: - TimberLine Towers for Yakima Crossbars - Raised, Factory...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• How to Carry Two Canoes on Roof of 2019 Honda Passport with Factory Crossbars
  Your best option is to use the Thule Compass Watersport Carrier # TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport. It can easily accommodate your two canoes, as long as their combined weight is not over 130 lbs, and they are not more than 36 inches wide (at their widest point). The Compass will allow you to carry your two canoes in a vertical (post-style) position so you have one on each...
  view full answer...
  
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Does Malone Square Bar Roof Rack # MPG203 Fit 2019 Toyota 4Runner
  Yes the Malone SteelTop roof rack part number # MPG203 would fit and work great on the roof of your 2019 Toyota 4Runner with raised rails.
  view full answer...
• Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top
  Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
  view full answer...
• Recommended Thule Aeroblade Roof Rack Recommendation for 2018 Toyota Tacoma
  47 inch long Thule aero bars would be too short to be used on your 2018 Toyota Tacoma. Thule recommends a 53 inch bar like the part # TH711400 with the feet part # TH710501 and the fit kit # TH145107.
  view full answer...
• What Does The Yakima TimberLine Roof Rack for Raised Rails Y39YD Come With?
  Hello Alexander, thanks for reaching out. The Yakima TimberLine Roof Rack for Raised Rails part # Y39YD is a full roof rack system, and this is the correct fit for the 2025 Kia Sorento. It comes with four TimberLine Towers and two 50" JetStream crossbars. If you want to do a larger crossbar, it is possible, we just wouldn't offer it as a kit. The next size up for the Yakima Aero bars is a 60". So all you would need is the four pack of TimberLine Towers part # Y33TR, and a set of 60" crossbars...
  view full answer...
• Recommended Roof Rack For A 2018 Chevy Equinox Hauling A Kayak And Bike
  Hey William, If your 2018 Chevy Equinox has rails that run from front to back then I recommend the Yakima JetStream Crossbars # Y00425 and TimberLine Towers # Y33TR. If you have a naked roof then you'll need the following roof rack components: Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK488 To haul the kayak you can can clamp on a carrier like the Rhino-Rack...
  view full answer...
• What Comes with the Annex for 2 Person Yakima SkyRise Tents # Y07421
  The Annex for 2 Person Yakima SkyRise Tents # Y07421 is just the enclosure that you see pictured beneath the Yakima SkyRise tent in the attached review video. This is a fit for the (discontinued) SkyRise Y07407 (Red) or SkyRise HD # Y07436 (Tan and Red). The SkyRise tents are compatible with your Crosstrek but you will need to use a different roof rack if the one you currently are using is the OEM roof rack according to Yakima. Roof rack systems where the crossbars end inside the legs...
  view full answer...
• Recommendation on a 1 or 2 Kayak Carrier for a 2010 Subaru Forester
  If you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches. I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the...
  view full answer...
• Option For Using 80" Yakima CoreBars On 2015 Toyota Sienna
  Good morning, and thanks for reaching out. Yes, we do have an option for using the 80" Yakima CoreBars on a 2015 Toyota Sienna with the factory raised rails. First, I would like to note that the 80" crossbars are super long for a Sienna. Yakima recommends a 50" CoreBar for the 2015 Sienna. We have a 2013 Sienna XLE with 41" OEM crossbars that are flush with the raised rails on the roof. The 80" bars are almost twice that length, so they are going to stick out like 20" past the raised...
  view full answer...
• Yakima Round Bar Roof Rack Components to Install Round Bars 2015 Toyota Sienna
  Hey Jim, the best alternative to the mounting hardware you have now would be the current Yakima roof rack components that they list for installing the round bars on your 2015 Toyota Sienna which is their Timberline kit that consists of part numbers # Y33TR and # Y03536. How do you like the longer crossbars?
  view full answer...
• Can I Use the Thule Hullavator # TH898 with the Yakima JetStream Crossbars and Lock Cores?
  I just went ahead and looked up your orders and confirmed that you recently ordered the Yakima Same Key System (SKS) Lock Cores (QTY 4) # Y07204, the Yakima TimberLine Towers # Y33TR, and the 50" JetStream Crossbars # Y00425. The lock cores that you purchased install into the TimberLine towers and not into the end caps of the JetStream crossbars themselves. With that being said, the Thule Hullavator # Y00425 is compatible with the JetStream crossbars. It is important to note, though,...
  view full answer...
  
• Roof Rack for 2024 Subaru Forester Wilderness With Roof Top Tent
  I'm assuming you're wanting a roof rack to hold your tent since you looked at the Malone AirFlow2 # MAL74AR. I would double check the requirements of your roof tent to be sure, but this roof rack should be able to handle it. For example, a tent like the Yakima SkyRise # Y07436 requires a roof and roof rack with a minimum capacity of 165 lbs. The Malone rack would meet those requirements. If you only plan to use the roof rack when you use the tent the Malone is a good option. If you want...
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• Recommended Roof Rack for 2024 Toyota Sienna
  For an extremely quiet roof rack that fits your 2024 Toyota Sienna I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 -TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise, and wind vibration. This means they will definitely be quiet compared to the factory crossbars. You can also add...
  view full answer...
• Replacement long T-Bolt Kit for the Yakima Timberline Towers
  Brandon, it looks like the long Allen bolt you're looking for for the TimberLine Towers for Yakima Crossbars # Y33TR is only offered as part of the Replacement Rubber Strap Kit for Yakima TimberLine Towers # 8880820.
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side Rails
  For your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
  view full answer...
  
• How to Fit Yakima Show Down Kayak Carrier on 2014 Subaru Outback with Factory Roof Rack
  The Yakima ShowDown kayak carrier part # Y04081 can fit your 2014 Subaru Outback Wagon but would require an aftermarket roof rack as it won't fit the factory bars. So for that Yakima recommends the Jetstream bar roof rack # Y00425 and # Y33TR which is a high quality and aerodynamic roof rack confirmed as a fit for your vehicle.
  view full answer...
• How to Carry Bikes on a 2018 Volkswagen Golf Alltrack with a Sunroof
  Using the JetStream Crossbars # Y00425 along with the TimberLine Towers # Y33TR will be taller than using the Yakima RailBar Crossbars # Y00432-0433 for your 2018 Volkswagen Golf Alltrack but you do need to note that every roof rack manufacturer states that a sun or moon roof should not be used with a roof rack installed. Roof racks do have some wind noise which the aero style bars, although cause less noise, are not immune from. There is also the issue of clearance as well as possible...
  view full answer...
• Which Yakima Feet for 2017 Jeep Cherokee for Roof Rack for Yakima SkyBox Cargo Box
  For your 2019 Jeep Cherokee with the raised rails the correct Yakima feet for attaching crossbars is the Timberline like the Yakima Jetstream roof rack part numbers # Y00425 and # Y33TR. These would work really well with the Yakima SkyBox NX 16 part # Y95AV you also mentioned. There would be no clearance issues as I checked with Yakima to confirm this for you.
  view full answer...
• Large Roof Box and Roof Rack for 2021 Ford Expedition Max
  Hey Lance! The largest carrying capacity for a roof box is 21 cu ft. Out of the available options in this size I recommend the Yakima SkyBox NX XXL Rooftop Cargo Box # Y43QD. I have used the SkyBox myself and I love it. Incredibly easy to install, easy to use, just a great experience overall. I have used a few others, and own a Thule, but the SkyBox has been my favorite. For a roof rack I recommend the Yakima TimberLine Roof Rack for Raised Rails # Y42GD. This uses JetStream crossbars...
  view full answer...
• Adding Longer Crossbars to Malone EcoLight Trailer
  Hey Roman! The Malone Crossbar Conversion Kit # MPG475 is designed to be added to a utility trailer. You can probably get this work with your EcoLight # MAL53FR but it isn't necessary. What you can do instead is trade out your existing 58" crossbars with the 78" # MPG4001. This will save you some money and give you the extra space for an additional kayak on the trailer. You can offset your current bunks like you said and add a smaller kayak with another carrier like # MAL98FR. What kind...
  view full answer...
• What Roof Rack do I Need for My 2021 Toyota 4Runner Off-Road Premium to Use Hullavator?
  Hello Lawrence, Thank you for all the details, it is most helpful. The Hullavator is a great system, so I can see why you would want the right set-up so you can continue to use it. I do not have a database that supplies me with all the specs on the different vehicles, in my research it is listed that your raised bars for your 2021 Toyota 4Runner Off-Road Premium are 47 to 50 inches apart. That being said, the Yakima TimberLine Roof Rack for Raised Rails - JetStream Crossbars - Aluminum...
  view full answer...
• Best Roof Rack For 2021 Honda Passport With OEM Roof Rails
  Hello Gary, thanks for reaching out. Your are getting the OEM raised rails from Honda, correct? If so, what I recommend for a roof rack is the Yakima TimberLine Roof Rack for Raised Rails # Y42GD. This is a full roof rack system so you get your towers and crossbars. It has a 60" aero crossbar with a top channel which should be plenty of room for two kayaks. The Hullavator take up 28-1/2" of crossbar space. So it won't even take up half of your crossbar space. It will also have the necessary...
  view full answer...
• Quiet Roof Rack for 2024 Ford Bronco Sport Big Bend Edition
  Hey Chester! Have you tried the Yakima TimberLine Roof Rack with JetStream Crossbars # Y42GD yet? When it comes to noise reduction these are as good as it gets. There will always be some level of noise with the addition of a roof rack but these keep it to a minimum. If you want to add locks you will also need the Yakima Same Key System (SKS) Lock Cores # Y07204. The rack is pretty easy to install so if you still think it is too much you can always take it off when you don't need it. Another...
  view full answer...
• Roof Rack For Carrying Two Tooenjoy Lift Assist Racks On A 2015 Toyota 4Runner
  Hello Rob, thanks for reaching out. We do have a roof rack option that will fit your 2015 Toyota 4Runner and will allow you to carry both of your Tooenjoy Elevating Roof Rack 302 units. Here is what I recommend: - Yakima TimberLine Roof Rack for Raised Rails - JetStream Crossbars - Aluminum - Silver - Qty 2 # Y57SD This is a complete roof rack system, so you get your towers and your crossbars. The towers will attach directly to the factory raised rails on your 4Runner. The crossbars are...
  view full answer...
• Will Yakima TimberLine Towers And LockNLoad Platform Fit 2025 Honda Pilot Trailsport?
  Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof rack with crossbars like the Yakima TimberLine Roof Rack for Raised Rails # Y42GD which comes with 60" black aero crossbars. Then use the clamp-on version of the LockNLoad, part # Y05045-39.
  view full answer...
• Roof Rack recommendation for 2024 Kia Telluride with Raised Rails and a Sunroof
  Hey Will, thanks for reaching out! Was the problem with the Yakima TimberLine FX # Y87UV how low the crossbars were, or how far inside the rails that the legs sat? It looks like the Yakima TimberLine Roof Rack # Y42GD has a bit more height clearance and are still pretty easily installed/removed so they are a great alternative as long as the inside width clearance wasn't the problem. I'm attaching the photos Yakima took of the TimberLine FX as well as the standard TimberLine kits so you...
  view full answer...
• Parts Needed To Use Thule Hullavator On 2002 Ford Explorer And On 2023 Volkswagen Tiguan
  Hello Gayle, thanks for reaching out. I can definitely help you with this. You will want to use a longer than standard crossbar to accommodate the Hullavator# TH898. Here is what I recommend: 2003 Ford Explorer with factory raised rails: - Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 65" Long - Black # MAL24AR 2024 Volkswagen Tiguan with factory raised rails: - Yakima TimberLine Roof Rack for Raised Rails - JetStream Crossbars - Aluminum - Black - Qty...
  view full answer...
• Yakima Roof Rack that Fits Raised Roof Rails of 2020 Mercedes GLE450
  Hey Andy, we have a complete Yakima Jetstream roof rack for your 2020 Mercedes GLE 450 with the part # Y42GD. This uses the TimberLine feet that attach to raised roof rails. What are you wanting to carry on you the roof of your vehicle?
  view full answer...
• What Do I Need To Install A Rod Carrier On My Bronco Sport With Raised Rails?
  Hey Mark, In order for any of our rod carriers to install on your vehicle, you would need to get a crossbar system for your roof. Since your Bronco has the raised rails already I recommend the Yakima # Y42GD roof rack. This kit installs on those raised rails and gives you the mounting points you would need to install a rod carrier. A good rod carrier option I recommend is the Rhino-Rack Carrier # RR572. This is a 4 rod carrier that installs by clamping around the crossbars and has an...
  view full answer...
• What is Needed For Yakima LockNLoad Platform Rack on 2024 Hyundai Santa Fe
  Hi Jim, I checked directly with Yakima for you, and while you can use a LockNLoad platform, there isn't one that mounts directly to the feet on the side rails of your 2024 Hyundai Santa Fe. So what you'd have to do is get the Yakima roof rack and then add the LockNLoad on top of that. Here are the parts you need, and you have a choice of either Black or Silver for the roof rack: - Yakima TimberLine Roof Rack for Raised Rails - Silver # Y57SD or Black # Y42GD - Yakima LockNLoad Platform...
  view full answer...
• How to Use Truck Bed Rack & Tonneau Cover on 2022 Honda Ridgeline
  Hi Ashton, I'm sorry to say the Retrax tonneau covers that fit your 2022 Honda Ridgeline are not compatible with racks, and there isn't any type of adapter that will allow this. I know it's not the news you were wanting but the only way to do this with your Ridgeline is a rack-compatible tonneau like the BAK Revolver X4s # BAK78ZR with Front Runner Slimline II Truck Bed Platform Rack # FR66RJ. Alternatively, to help carry gear you could just use a standard roof rack on top of your cab...
  view full answer...
• How to Use Inno Gear Case Rooftop Cargo Box on 2024 Nissan Pathfinder Rock Creek
  Hi Philippe, While the Inno Gear Case 720 Rooftop Cargo Box # IN94YV won't fit on the factory rack of your 2024 Nissan Pathfinder Rock Creek, there is a way to use it. What you'd have to do is get a separate roof rack that goes on the side rails the Pathfinder's rack, the Yakima TimberLine Roof Rack for Raised Rails # Y42GD. I did verify directly with Yakima that the # Y42GD fits the factory side rails of your Pathfinder, and this will allow you to use the Gear Case 720 # IN94YV.
  view full answer...
• Roof Rack Recommendation For 2023 Kia Carnival LX
  Hello Richard, thanks for reaching out. We do offer roof rack fits for the 2023 Kia Carnival LX, but the # TH66RE fit kit you mentioned is for a Volkswagen Golf, so this will not work for you. If you need a roof rack for your Kia, I recommend the Yakima TimberLine Roof Rack # Y42GD. This is a full roof rack system so you get your aero bars, towers and fit kit which is custom fitted for the factory raised rails on the 2023 Kia Carnival LX. Our install/review video for this roof rack...
  view full answer...
• Recommended Roof Rack for a 2024 Kia Telluride w/ Raised Roof Rails
  We have a couple of Timberline roof rack set ups for your 2024 Kia Telluride but nothing with HD rails or crossbars. They are the Yakima TimberLine Roof Rack for Raised Rails item # Y42GD in black or item # Y57SD in silver. Both of these kits include the adapters you need to attach to your Kia's raised rails. The 60" bars are definitely going to be the way to go. I attached a couple pictures below so you can see exactly what they're going to look like on your Telluride. There's also an...
  view full answer...
• Is There 60 inch Crossbar Roof Rack that Fits 2023 Subaru Ascent with Raised Roof Rails
  Hey Long, so I have a 60 inch crossbar solution that we know fits your 2023 Subaru Ascent but Rhino Rack only has the 53 inch setup as a fit for your vehicle. Since the attachment channels that run along the bottom of the bars does not go all the way down the bar we couldn't guarantee a longer bar from Rhino Rack would fit. Instead the Yakima Jetstream Crossbar Set part # Y42GD would be a really great option that is 60 inches like you are wanting. We recently got out all of the popular...
  view full answer...

Do you have a question about this Roof Rack?