Will Yakima TimberLine Towers And LockNLoad Platform Fit 2025 Honda Pilot Trailsport?

Question

Question:

Hi, question about Yakima. Can I pair the timberline towers, adaptors and locknload on the new ‘25 honda pilot trailsport? I seem to be having trouble confirming.. thanks!

asked by: Kevin C

0

Expert Reply:

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof rack with crossbars like the Yakima TimberLine Roof Rack for Raised Rails # Y42GD which comes with 60" black aero crossbars. Then use the clamp-on version of the LockNLoad, part # Y05045-39.

expert reply by: Jesse M

0

Kevin C.

12/1/2024

Thanks. Will the lock n load attach to any regular cross bars then? Any advantage to going with Yakima specifically?

Jesse M.

12/2/2024

@KevinC Yes, the clamp-on LockNLoad Platform # Y05045-39 will attach to round, square, aero, elliptical, and most factory crossbars. There are other platforms out there that are comparable but in my experience the Yakima are easier to assemble, more user friendly and more durable than other brands.

Answer 1

Hey Ronald, Yakima has a set of flush aero crossbars that fit your 2025 Honda Pilot with raised roof rails with the part #Y87UV which comes with a set of two bars that are much longer than what you referenced. Were you wanting a single crossbar? If…

view full answer...

Answer 2

The Yakima Timberline Towers use the common SKS lock system. You just need Yakima Same Key System (SKS) Lock Cores (QTY 4) #Y07204 which comes with everything necessary for installing locks onto your towers. It includes two matching keys along with a…

view full answer...

Answer 3

I checked with Yakima and the newer Replacement ZipStrip Straps for Yakima SuperCush Bike Rack Cradles #Y55XR are not compatible with the pre-2015 Yakima Ridgeback bike rack. For those years you will need the Replacement ZipStrip Straps for Yakima…

view full answer...

Answer 4

Since you got the FullSwing in 2016, and your cradle has a black release button (thank you for the photo by the way), unfortunately the 8890297 you got are incorrect. So what you need are the Replacement ZipStrip Straps for Yakima SuperCush Bike Rack…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Will Yakima TimberLine Towers And LockNLoad Platform Fit 2025 Honda Pilot Trailsport?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching