Replacement long T-Bolt Kit for the Yakima Timberline Towers

Question

Question:

Do you know how I can get a long replacement bolt for my Yakima TimberLine Towers? I had one break on me when I was tightening it. Its an allen wrench bolt.

asked by: Brandon M

0

Expert Reply:

Brandon, it looks like the long Allen bolt you're looking for for the TimberLine Towers for Yakima Crossbars # Y33TR is only offered as part of the Replacement Rubber Strap Kit for Yakima TimberLine Towers # 8880820.

expert reply by: Bryce D

0

Brandon

9/3/2024

Thanks for your reply. Do I see correctly that if I try to buy the "Replacement Rubber Strap Kit for Yakima TimberLine Towers " from you it may take until Jan. 4th, 2025?

Bryce D.

9/4/2024

@Brandon Yikes yeah that's what it looks like right now (9/4/24). It looks like these are out of stock on Yakima's end which is why it's taking so long.

Answer 1

The long screw of the Timberline strap needs to thread into a barrel nut that's at the bottom of the strap. So you'll need to see if you can rotate the barrel nut or just move strap to the point the threads of the barrel nut line up with the…

view full answer...

Answer 2

Basically you are going to need to remove the long Allen bolt I pointed out in the attached picture which will allow the strap to release. From there you'll just need to slide the barrel nut out of the metal end of the strap so that you can pull…

view full answer...

Answer 3

To install the Replacement Rubber Strap Kit for Yakima TimberLine Towers #8880820, on your TimberLine Towers, you will need to slide the barrel nut into the metal end of the strap, and bring the strap to the front of the tower. From here, you will…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement long T-Bolt Kit for the Yakima Timberline Towers

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching