bing tracking image
  1. RV Steps
  2. TorkLift
  3. Towable Camper
  4. Pull-Out Step
  5. 4 Steps
  6. 22 Inch Wide Step
TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 27-1/2" Base - 375 lbs
TorkLift

TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 27-1/2" Base - 375 lbs

In Stock
$799.99
RV Steps
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
8" Deep x 22" wide aluminum RV steps have an easy-to-use lever that lets you change between 3 height settings for proper elevation. Fine-tune height and level stairs with built-in landing gear legs. Glow tape creates a lighted step surface. Great Prices for the best rv steps from TorkLift. TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 27-1/2" Base - 375 lbs part number TLA8004 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (514)
  • Q & A (0)
  • Photos

TorkLift RV Steps

  • Towable Camper
  • Pull-Out Step
  • 4 Steps
  • 22 Inch Wide Step
  • TorkLift
  • 27-1/2 Inch Wide
  • Aluminum
  • 7-1/2 Inch Drop/Rise
  • 33 Inch Entry
  • 34 Inch Entry
  • 36 Inch Entry
  • 38 Inch Entry
  • 40 Inch Entry
  • 42 Inch Entry
  • 44 Inch Entry

8" Deep x 22" wide aluminum RV steps have an easy-to-use lever that lets you change between 3 height settings for proper elevation. Fine-tune height and level stairs with built-in landing gear legs. Glow tape creates a lighted step surface.


Features:

  • Pull-out steps make it easy to get into or out of your trailer or RV
  • Scissor design lets you manually collapse steps and fold them up for travel
  • Landing gear creates a stable connection from the bottom step to the ground
    • Adjustable legs help to stabilize stairs on uneven terrain
    • Large rectangular footplates provide level support and help prevent sinking into ground
    • No assembly required - landing gear comes pre-installed on the bottom step
  • Release lever lets you quickly and easily deploy steps
    • Simply lift the lever and pull out the steps
    • Lever secures with included bail pin
  • Adjustable base lets you raise or lower the steps
    • Use release lever to secure steps at high, medium, or low elevation
  • Glow tape creates lighted step surface for safely climbing into and out of your camper at night
    • Adheres to sides of step platforms
    • Glows in the dark for up to 10 hours with only 5 minutes of light exposure
  • Aircraft-grade aluminum and stainless steel construction is durable and rustproof
  • Built-in SureGrip tread on step surface provides excellent footing
  • Stainless steel hinges are bolted together for easy add on, removal, or replacement of individual steps
    • Bushing bearings offer smooth action and are longer-lasting that standard riveted connections
  • Sturdy mounting base bolts onto your RV with included hardware
  • Made in the USA


Specs:

  • Entry height: 32-1/2" - 44"
  • Step dimensions: 22" wide x 8" deep
  • Mounting bracket dimensions: 27-1/2" wide x 13-7/8" deep
  • Drop/Rise: 7-1/2"
  • Weight capacity: 375 lbs
  • Lifetime limited warranty


Revolutionary Stability

TorkLift's GlowStep Revolution RV steps offer the ultimate in stability and adjustability. You can adjust the stairs' height to account for any type of terrain using the easy-to-use release lever. The built-in landing gear legs let you fine-tune the height. And they can be adjusted independently of one another to stabilize the steps on uneven terrain, eliminating any wobble.


Will Torklift GlowStep Revolution Scissor Steps Work for You?

Pull-out steps are typically installed on travel trailers. The GlowStep Revolution pull-out steps from Torklift are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.


Revolution Mounting

The GlowStep Revolution pull-out scissor steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the doorframe, and measure the width and depth. You will need a mounting space that is at least 27-1/2" wide and 13-7/8" deep.


If it turns out you have less space beneath your doorway, there are smaller step assemblies available with 25-1/2" wide brackets. A full list of the available steps is below.


Outrigger RV Steps

Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.


Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.


How Many Steps Do You Need?

Revolution Entry Height

To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, and it will tell you how many steps you need.


The chart below displays entry height measurement ranges in the first column. If you determined you need a 25-1/2" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 27-1/2" mounting bracket, the step part numbers with that width are in the third column. Choose the bracket size that is closest to your measurements without going over.


This page's step assembly is in bold text.


Entry Height25-1/2" Mounting Bracket Width27-1/2" Mounting Bracket Width
18-1/2" - 28"TLA8102TLA8002
25-1/2" - 36"TLA8103TLA8003
32-1/2" - 44"TLA8104TLA8004
39-1/2" - 52"TLA8105TLA8005
46-1/2" - 60"TLA8106TLA8006


How Do You Install the Steps?

To install the steps:

  1. Make sure the camper is level on flat ground
  2. Lift the steps into the mounting space and prop into place

    -Fully extend steps until feet touch the ground

  3. If needed, mark the mounting holes on the camper and drill

    -Set aside steps before drilling

  4. If needed, install the outriggers
  5. Align step mounting holes and secure in place with carriage bolts and flange lock nuts

    -Make sure the bracket is backed up fully against the I-beam on the chassis

    -Hardware not included

  6. Tighten hardware until snug
  7. Make sure assembly is sitting square and level
  8. Torque the hardware tight

GlowStep Accessories

Torklift Accessories

Add any of these accessories to your Revolution scissor steps for stability, eliminating gaps, and keeping your steps and RV interior clean. The GlowGuide handrail (TLA7621 - sold separately) attaches to the outside of your RV and a bracket on the bottom of the steps. This helps to steady the assembly and adds 25 lbs to the weight capacity of the stairs. The SafeStep vinyl barrier (TLA7602 - sold separately) easily fastens with Velcro strips in between any 2 steps. This prevents you or your pets from accidentally slipping between steps. The DirtDestroyer boot brush (TLA7603 - sold separately) affixes to the bottom of the steps so you can scrape your shoes before climbing into your RV.



A8004 Tork Lift Glow Step Revolution Scissor Stairs w/ Landing Gear - 4 Stairs - 27-1/2" Base - 375 lbs

Item # TLA8004





Customer Satisfaction Score:

Ratings & Reviews

4.8

514 reviews
8" Deep x 22" wide aluminum RV steps have an easy-to-use lever that lets you change between 3 height settings for proper elevation. Fine-tune height and level stairs with built-in landing gear legs. Glow tape creates a lighted step surface.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
514
Show More Reviews

See what our Experts say about this TorkLift RV Steps

  • Base Size of TorkLift GlowStep Revolution Scissor Steps
    Hey Nick! The # TLA8104 you were looking at with a 25-1/2" base is the same as the A8104. The # TLA8004 which is the same as the A8004 has a 27-1/2" base which matches what you heard from TorkLift. Both are designed for an entry height of 32-1/2" - 44".
    view full answer...
  • What is Distance from Top of Mounting Bracket to First Step of Torklift Glowstep
    Hey Ray, so the TorkLift GlowStep Revolution # TLA8004 has three height settings for the top step. 0.5 inch the highest, 3.5in middle, 6.5in lowest.
    view full answer...
  • Recommendation For Less Steep Steps For Fifth Wheel
    Because you want steps that are easier to navigate, I recommend something like the Torklift GlowStep Revolution Scissor Steps w/Landing Gear-4 Steps, Item # TLA8004. The Torklift, Item # TLA8004, has aluminum steps that are lightweight, fold up for storage, and are 8 inches deep x 22 inches wide. You can fine tune the height and level of stairs with the built-in landing gear legs which also make these steps more stable. The mounting base dimensions are 27-7/16 inches x 12 inches deep....
    view full answer...
  • Replacement Steps For 27-3/4 Foot Trailer With 3 Steps
    On of our most popular 3 step options is the Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop/Rise - 24" Wide - Steel - 300 lbs # LC432687. This step has Mounting base dimensions of 27-1/2 inches wide x 9 inches deep. The bolt hole centers are 26-1/4 inches wide x 7 inches deep. We also have electric step options like Lippert Components Kwikee 25 Series Triple Electric Step # LC3658374. If you let me know your bracket dimensions and mounting hole dimensions, I can confirm a replacement...
    view full answer...
  • Recommended 4 Step GloStep for Carri-Lite Cashay 5th Wheel Trailer
    For you Carri-Lite 526RKS Cashay, I recommend measuring the width of your current step frame mounting bracket. If you have a measurement of 27-1/2 inches then the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8004 will be the best fit. If you have a measurement of 25-1/2 inches at that mounting base then you will want # TLA8104. The only difference between these steps is the width of the base that mounts to your RV. They both have the 22 inch by 8 inch steps and...
    view full answer...
  • Picking Out Torklift Glow Step That Fits Lance Model 1475
    The TorkLift GlowStep Revolution Scissor Steps # TLA8004 that you referenced are designed to fit entry heights on RVs that are between 32-1/2 and 44 inches which which might be a little higher than what you have on your 2018 Lance 1475 based on the pictures I was able to find online of it, we don't have a way to get the exact threshold height of your RV so you'll have to take a quick measurement to verify. If you find you have lower height we have the part # TLA8102 which has two steps...
    view full answer...
    Image 1 for
  • Could TorkLift GlowStep Revolution Steps # TLA8004 Easily Install 2017 Forest River Windjammer
    The TorkLift GlowStep Revolution Scissor Steps # TLA8004 that you referenced are designed to fit the standard RV step areas with the bracket kit part # TLA8022. There will most likely be some drilling though since these do install in a slightly different way that standard steps. The feet of the steps are adjustable in height pretty easily so if you somehow ended up on unlevel ground enough to call for it you could adjust the feet. In general most campsites are level enough for these to...
    view full answer...
  • Replacement Pull Out 3-Step Recommendation for 2017 Grand Design 303RLS
    I pulled up pictures of your Grand Design 303RLS and it looks to have a pull out style 3-step on it so for a replacement that will be as cost-effective as possible the part # LC432690 would be what you'd want. This can either bolt or weld to the frame of your trailer. If your outriggers are 25.5 inches apart you'd have to move them out 2 inches for these to bolt in their place.
    view full answer...
  • Availability of Torklift Glow Step that Fits 27-1/2 inch Wide Bracket Area
    Hey Kent, we have the part # TLA8004 for a 4 step or the part # TLA8006 for a 6 step Torklift Glowstep that has a base that is 27-1/2 inches wide. Do you know how many steps you are wanting or how tall your threshold is from the ground?
    view full answer...
  • TorkLift Add a Lift for TorkLift GlowStep Revolution Scissor Steps
    Yes, for your TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8004 you can use the Add-A-Step for TorkLift GlowStep Revolution Scissor Steps with 27-7/16" Wide Mounting Base # TLA8001.
    view full answer...
  • TorkLift GlowStep Steps That Store Under Grand Design Reflection
    The TorkLift GlowStep Stow N' Go part # TLA7843 are stored on the side of your camper attached with a bracket like in the photo I have attached. They do stick out on the side. You would need the GlowStep Revolution Scissor Step for it to store under the Grand Design like what you have now. I recommend TorkLift GlowStep Revolution part # TLA8004 for the Grand Design Reflection. Torklift has told us that the TLA8004 replaces the 3 step assembly on the Grand Design campers. However, I do...
    view full answer...
    Image 1 for Image 2 for
  • Difference Between Glowstep Stow n Go Steps and Revolution Steps
    Essentially it's how the two scissor steps store. The part # TLA7844 stores more like a traditional scissor step seen typically at the back of truck bed campers while the # TLA8004 stores more like what is seen on the side of campers. Since you have a Grand Design Reflection 337rls the part # TLA8004 would be the better option.
    view full answer...
    Image 1 for Image 2 for
  • Will TorkLift GlowStep Revolution RV Steps Fit On A 2021 Riverstone Legacy 391FSK
    Based on the pictures you've provided the design of your trailer wouldn't really allow for undermounted steps like the TorkLift GlowStep Revolution # TLA8004. You'd have to cut out a chunk of the body in order to get the steps sitting high enough to match up with the door opening. If there's an issue with your Lippert SolidSteps and you need to replace the set then we'll need to know the distance from the ground up to the door threshold (entry height) and the distance between the door flanges...
    view full answer...
    Image 1 for Image 2 for
  • Distance from RV Frame to First Step for the Torklift Glow Steps
    I spoke with my contact at Torklift and he informed me that from the mounting surface of where the Torklift Steps part # TLA8004 attaches down to the first step measures 3 inches in the highest setting. He also said that there is a 3 way adjustment you can make for the position of the step that will change that distance. Highest is 3 inches, middle is 5 inches, and lowest is 7 inches.
    view full answer...
    Image 1 for
  • TorkLift Glowstep Revolution Size Selection
    Since you have the 27" wide entryway, the only additional thing we need to know is the "Entry Height." The attached photo will show you how to measure from the top mounting point to the ground. From there use the attached chart. For instance if your entry height was 38" high, then you would use # TLA8004. Watch this though: If your entry height was 36" then you could use # TLA8004 or # TLA8003. The steps for taller entryways will extend out further. The steps for shorter entryways...
    view full answer...
    Image 1 for
  • Torklift Replacement Steps for Grand Design Reflection 5th Wheel Including 303RLS
    The Torklift # TLA8003 (3 Steps) will fit for your trailer. These are intended for a mounting bracket measuring 27-1/2" and an entry height of 25-1/2" to 36". Alternatively, the Torklift # TLA8004 (4 Steps) is designed for an entry height of 32-1/2" to 44" and will extend out further. If you have trouble on steps I would recommend the 4-step model, just know that they extend out further, otherwise the 3-step model is fine. Also check out the Torklift # TLA7621 Hand rail. 4 steps is...
    view full answer...
  • Larger Mounting Options for Lippert Steps
    Good news, I can help you find a wider step than the 24 inch LC341504. I've linked all the steps for you but if you look through the filters there should be a measurement column and there are sizes from 14 inches to 30 inches wide. The Lippert Steps are made for RVs which is why they are the 24 inch wide spread. I have something similar that may work for you that has brackets that have a variety of widths. The TorkLift Glow Step has a variety of steps like the # TLA7803-8000 that is...
    view full answer...
  • Can 4-Step TorkLift GlowStep Revolution Scissor Steps Be Used in Place of a Factory 3-Step System
    When replacing steps on a 5th wheel trailer you will want to stay with the same number of steps unless going to more steps retains the same retracted dimensions of your existing steps. For aftermarket steps there is no fit information in regards to specific trailers. You would have to go by the measurements. TorkLift steps # TLA8004 have a mounting base that is 27-7/16 inches wide and 12 inches deep. When retracted the steps hang down 16-17 inches from where they mount. The 3-step model,...
    view full answer...
  • Torklift Glowstep Recommendation for Doorway Height of 36 Inches
    Since your doorway/threshold height is 36 inches the correct Torklift GlowStep is the part # TLA8004 which has a threshold height range of 32-1/2" - 44" and would work perfectly. I attached an install video for this kit as well as a picture of what it looks like installed too.
    view full answer...
    Image 1 for
  • How to Install the TorkLift GlowStep Revolution in a Grand Design Reflection 337RLS
    I assume you have a MorRyde or Lippert step currently installed in your Grand Design Reflection 337RLS, which is what would require the custom work you referred to. I spoke with a representative of TorkLift, who said you can install the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8004 in your Grand Design Reflection 337RLS and the custom work would mean that you would first have to unscrew and remove your step, then look on the underside of the threshold where the step...
    view full answer...
  • Dimensions for TorkLift GlowStep Revolution Scissor Steps # TLA8004
    The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8004 referenced in your question is a 4-step assembly with a step platform dimension of 22 inches wide and 8 inches deep. The mounting base measures 27-7/16 inches wide and 12 inches deep and the steps have a drop/rise of 7-1/2 inches. The height of the steps when collapsed is 16-17 inches and the height from the top of step opening to the ground can be adjusted from 32-1/2 inches to 40 inches. These pull-out steps feature...
    view full answer...
    Image 1 for Image 2 for
  • Weight of TorkLift GlowStep Revolution Scissor Steps TLA8004
    The TorkLift GlowStep Revolution Scissor Steps with Landing Gear # TLA8004 weighs 55 lbs. These particular steps fit an entry height of 32-1/2" to 44" and the steps themselves are 22" wide x 8" deep to ensure plenty of footing. They can even be locked with the Pin Lock for TorkLift GlowStep Scissor Steps # TLA7509 and if you'd like, for added stability when traversing the steps you can add a handrail, the TorkLift GlowGuide Handrail # TLA7621. I have added a link below to a video review...
    view full answer...
  • Will Torklift GlowStep Scissor Steps # TLA8004 Fit 2013 Heartland Bighorn 2670RL
    The Torklift GlowStep Scissor Steps # TLA8004 is going to fit your 2013 Heartland Bighorn 2670RL and work well. We had a customer with a similar size Heartland 5th wheel install these and they fit and worked well. Since these contact the ground they are going to be much more stable than most RV steps. I attached an install video for this kit for you to check out as well.
    view full answer...
  • Determining Correct TorkLift GlowStep Revolution Scissor Steps For 2012 Rockwood 9312SS
    I would be happy to help you figure out the correct TorkLift GlowStep Revolution Scissor Steps for your 2012 Rockwood 8312SS, but unfortunately I do not have a list that has the correct step for your trailer. To determine the correct steps you will need to take a few measurements, with the first being the dimensions of the mounting space for the steps under the door of your trailer. There are two different widths offered which are 25-1/2" wide like the # TLA8104, or 27-1/2" wide like the...
    view full answer...
    Image 1 for


< Previous
123. . .4



Do you have a question about this RV Step?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Halie H
Updated by:
Halie H
Employee Isabelle B
Updated by:
Isabelle B
Employee Chelsea B
Written by:
Chelsea B
Employee Brent H
Test Fit:
Brent H
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<