Recommended 4 Step GloStep for Carri-Lite Cashay 5th Wheel Trailer

Updated 05/09/2020 | Published 10/27/2018

Products Featured in This Question

TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 27-1/2" Base - 375 lbs

(560)

$799.99

TorkLift GlowGuide Handrail for Campers and RVs with GlowStep Scissor Steps

(55)

$287.95

TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 25-1/2" Base - 375 lbs

(560)

$799.99

Question:

we would like to replace the steps on our Carri-lite 526RKS Cashay. we are looking at the Torklift glow steeps but we see a few different models. which do we need? we are looking to add the Torklift handrail as well.

asked by: Dave S

Expert Reply:

For you Carri-Lite 526RKS Cashay, I recommend measuring the width of your current step frame mounting bracket. If you have a measurement of 27-1/2 inches then the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8004 will be the best fit. If you have a measurement of 25-1/2 inches at that mounting base then you will want # TLA8104. The only difference between these steps is the width of the base that mounts to your RV.

They both have the 22 inch by 8 inch steps and will fit an entry height of 32-1/2 to 44 inches. The really nice feature of these steps is the leveling bases and the glow tape that will work for 10 hours with just 5 minutes of sunlight to easily see your step.

For the handrail, I recommend the TorkLift GlowGuide Handrail for Campers and RVs with GlowStep Scissor Steps # TLA7621. This has telescopic arms to give you a custom fit. It will integrate with your steps seamlessly and is easy to install and store.

expert reply by: Jason S

David L.

5/7/2020

I have 32.5 inches from ground to threshold, will the four step be my best choice? How much slope variance will I have?

Chris R.

5/9/2020

Going with a 4-step assembly like the TorkLift # TLA8004 will definitely give you a more comfortable slope to work with for your 32-1/2" threshold height. You're right around the minimum for this assembly's height range, so you'll have quite a bit of adjustment variance.