Weight of TorkLift GlowStep Revolution Scissor Steps TLA8004

Question

Question:

What is the weight of the torklift glow step 22 wide, 4 step? How much weight am I adding to my camper?

asked by: Curt

0

Expert Reply:

The TorkLift GlowStep Revolution Scissor Steps with Landing Gear # TLA8004 weighs 55 lbs. These particular steps fit an entry height of 32-1/2" to 44" and the steps themselves are 22" wide x 8" deep to ensure plenty of footing.

They can even be locked with the Pin Lock for TorkLift GlowStep Scissor Steps # TLA7509 and if you'd like, for added stability when traversing the steps you can add a handrail, the TorkLift GlowGuide Handrail # TLA7621.

I have added a link below to a video review for you to check out as well if you'd like of the TorkLift GlowStep Revolution Scissor Steps with Landing Gear # TLA8004.

expert reply by: Kyle S

0

Answer 1

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 2

The SoftStartRV Soft Start for 2 Air Conditioner Setup #SSR44FR would be the system you are wanting since you have the 2 A/C's on your RV. The 1497-3601 part number that you were given from Airxcel is for their Coleman soft start kit that you…

view full answer...

Answer 3

Hey Gary, so we don't carry that brand of soft start for RV AC units but we do have the Softstart brand like the part #SSR54FR for a single zone or part #SSR44FR for a dual zone setup. These reduce the amperage requirement on startup by 70…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 7

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

view full answer...

Answer 8

Thanks for the information and picture James! Your Curt 5,100 lbs capacity axle uses item #25580 inner bearings and item #LM67048 outer bearings. So you would need the Bearing Kit item #BK3-300, which includes both bearings, along with both races, a…

view full answer...

Answer 9

Hey Kevin, this is a great question but oftentimes it is a good idea to manually adjust self adjusting brakes like the #LC83PX yo have initially to basically get them close and then from there not worry about adjustments. Have you adjusted brake…

view full answer...

Answer 10

Hey David, I did some checking and your 2023 Grand Design 270BN has Curt 4,400 lb axles so for replacement ABS parts you would need the part #LC34RP for the hub/drums and the part #LC79MP for the brake assemblies. Thanks for following up with us…

view full answer...

Answer 11

Great eye for the details, Lena. These Lippert 12inch ABS brake assemblies #LC83PX are self-adjusting, which means you only need to do a single initial adjustment, and then the brakes will automatically fine-tune themselves as you tow. By…

view full answer...

Weight of TorkLift GlowStep Revolution Scissor Steps TLA8004

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching