TorkLift GlowStep Revolution Steps Manufacturer Review Video

Thanks for reaching out, Edith! Yes, the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear #TLA8102 are exactly what you need for your 2021 Lance 1995 according to the specs you gave me.

The collapsed height of the TorkLift GlowStep Revolution Scissor Steps part #TLA8005 is between 18-1/4 to 19-1/4".

I wish we had an ideal solution that covered both scenarios, but best option would probably be the steps part #TLA8005 as it's the correct choice for the taller height you'd see. When it's lower the steps would maybe not be as needed.…

Most RV steps are going to have a drop/rise of about 8". The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear, #TLA8003, has a drop/rise of 7-1/2" when fully extended. For a four step, #TLA7834. Or a 5 step, #TLA8005. These come…

The TorkLift GlowStep Revolution Scissor Steps #TLA8004 are a possible fit for your 2016 Dutchmen Voltage 3914. These steps are designed to work with a entry height measurement of 13-7/8 inches to 32-1/2 inches measured from the ground to the floor…

I spoke with my contact at Torklift and he informed me that from the mounting surface of where the Torklift Steps part #TLA8004 attaches down to the first step measures 3 inches in the highest setting. He also said that there is a 3 way adjustment…

When replacing steps on a 5th wheel trailer you will want to stay with the same number of steps unless going to more steps retains the same retracted dimensions of your existing steps. For aftermarket steps there is no fit information in regards to…

If your current TorkLift steps are the 2-to-5 step GlowStep Revolution models with 27-7/16" wide mounting bases, part #TLA8002, #TLA8003, #TLA8004, or #TLA8005, you can use the TorkLift Add-A-Step, part #TLA8001. If your Glow Steps aren't…

I have a solution for you but we don't have a replacement bracket to replace the support and bolt that was broken on your TorkLift GlowStep similar to the #TLA8004 . Instead you would need to use the Add-A-Step for TorkLift GlowStep Revolution…

Rivets need to be drilled out so you'd need to find a drill bit thats a little smaller than the rivet and drill through them till they fall out. You do not need special hardware to mount #TLA8102 to your brackets either. Nuts and bolt that are…

You would need to support the Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly #LC370762 the entire length and would not want to cantilever over the 8" drop. To complete the tray you'll need to choose the appropriate size…

To determine if the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier for RVs #LC125460 will be compatible with your 2014 275ULSBS Work n Play trailer you'll need to measure the chassis to ensure the mounting brackets line up…