How to Install the TorkLift GlowStep Revolution in a Grand Design Reflection 337RLS

Updated 05/10/2018 | Published 05/09/2018

Products Featured in This Question

TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 27-1/2" Base - 375 lbs

(564)

$795.75

TorkLift GlowStep Revolution Vertical Stud Adapter Bracket

(7)

$99.22

Question:

I WANT TO BUY THE TOLKLIFT GLOW STEP REVOLUTION, BUT WHEN IVE LOOKED AT THE TORKLIFT SITE THEY SAY MY GRAND DESIGN REFLECTION 337RLS REQUIRES A CUSTOM INSTALLATION. CAN YOU ASSIST ME IN WHAT ADDITIONAL PARTS I NEED TO MAKE THIS INSTALLATION?

asked by: STEVE

Expert Reply:

I assume you have a MorRyde or Lippert step currently installed in your Grand Design Reflection 337RLS, which is what would require the custom work you referred to.

I spoke with a representative of TorkLift, who said you can install the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8004 in your Grand Design Reflection 337RLS and the custom work would mean that you would first have to unscrew and remove your step, then look on the underside of the threshold where the step was. If there are still brackets there you would use those to mount the GlowStep Revolution. If the brackets were NOT there you would simply need to use the GlowStep Revolution Vertical Stud Adapter Bracket # TLA8022.

The only other thing you would need to look for on the underside of that threshold is a cutout where your OEM steps mounted. If that cutout was not there, you would simply need to make it yourself.

I have attached a link to the installation instructions of these steps for you to take a look at.

expert reply by: Kyle S