bing tracking image
  1. RV Steps
  2. TorkLift
  3. Pull-Out Step
  4. Towable Camper
  5. 6 Steps
  6. 22 Inch Wide Step
TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 6 Steps - 27-1/2" Base - 325 lbs

TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 6 Steps - 27-1/2" Base - 325 lbs

Item # TLA8006
Our Price: $883.86
RV Steps
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
8" Deep x 22" wide aluminum RV steps have an easy-to-use lever that lets you change between 3 height settings for proper elevation. Fine-tune height and level stairs with built-in landing gear legs. Glow tape creates a lighted step surface. Great Prices for the best rv steps from TorkLift. TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 6 Steps - 27-1/2" Base - 325 lbs part number TLA8006 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (475)
  • Q & A (0)
  • Photos

TorkLift RV Steps - TLA8006

  • Pull-Out Step
  • Towable Camper
  • 6 Steps
  • 22 Inch Wide Step
  • TorkLift
  • 27-1/2 Inch Wide
  • 7-1/2 Inch Drop/Rise
  • Aluminum
  • Ground Contact

8" Deep x 22" wide aluminum RV steps have an easy-to-use lever that lets you change between 3 height settings for proper elevation. Fine-tune height and level stairs with built-in landing gear legs. Glow tape creates a lighted step surface.


Features:

  • Pull-out steps make it easy to get into or out of your trailer or RV
  • Landing gear creates a stable connection from the bottom step to the ground
    • Adjustable legs help to stabilize stairs on uneven terrain
    • Large rectangular footplates provide level support and help prevent sinking into ground
    • No assembly required - landing gear comes pre-installed on the bottom step
  • Release lever lets you quickly and easily deploy steps
    • Simply lift the lever and pull out the steps
    • Lever secures with included bail pin
  • Adjustable base lets you raise or lower the steps
    • Use release lever to secure steps at high, medium, or low elevation
  • Glow tape creates lighted step surface for safely climbing into and out of your camper at night
    • Adheres to sides of step platforms
    • Glows in the dark for up to 10 hours with only 5 minutes of light exposure
  • Scissor design lets you manually collapse steps and fold them up for travel
  • Aircraft-grade aluminum and stainless steel construction is durable and rustproof
  • Built-in SureGrip tread on step surface provides excellent footing
  • Stainless steel hinges are bolted together for easy add on, removal, or replacement of individual steps
    • Bushing bearings offer smooth action and are longer-lasting that standard riveted connections
  • Sturdy mounting base bolts onto your RV with included hardware
  • Made in the USA


Specs:

  • Entry height: 46-1/2" - 60"
  • Step dimensions: 22" wide x 8" deep
  • Mounting bracket dimensions: 27-1/2" wide x 13-7/8" deep
  • Drop/Rise: 7-1/2"
  • Weight capacity: 325 lbs
  • Lifetime limited warranty


Revolutionary Stability

TorkLift's GlowStep Revolution RV steps offer the ultimate in stability and adjustability. You can adjust the stairs' height to account for any type of terrain using the easy-to-use release lever. The built-in landing gear legs let you fine-tune the height. And they can be adjusted independently of one another to stabilize the steps on uneven terrain, eliminating any wobble.


Will Torklift GlowStep Revolution Scissor Steps Work for You?

Pull-out steps are typically installed on travel trailers. The GlowStep Revolution pull-out steps from Torklift are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.


Revolution Mounting

The GlowStep Revolution pull-out scissor steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the doorframe, and measure the width and depth. You will need a mounting space that is at least 27-1/2" wide and 13-7/8" deep.


If it turns out you have less space beneath your doorway, there are smaller step assemblies available with 25-1/2" wide brackets. A full list of the available steps is below.


Outrigger RV Steps

Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.


Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.


How Many Steps Do You Need?

Revolution Entry Height

To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, and it will tell you how many steps you need.


The chart below displays entry height measurement ranges in the first column. If you determined you need a 25-1/2" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 27-1/2" mounting bracket, the step part numbers with that width are in the third column. Choose the bracket size that is closest to your measurements without going over.


This page's step assembly is in bold text.


Entry Height25-1/2" Mounting Bracket Width27-1/2" Mounting Bracket Width
18-1/2" - 28"TLA8102TLA8002
25-1/2" - 36"TLA8103TLA8003
32-1/2" - 44"TLA8104TLA8004
39-1/2" - 52"TLA8105TLA8005
46-1/2" - 60"TLA8106TLA8006


How Do You Install the Steps?

To install the steps:

  1. Make sure the camper is level on flat ground
  2. Lift the steps into the mounting space and prop into place

    -Fully extend steps until feet touch the ground

  3. If needed, mark the mounting holes on the camper and drill

    -Set aside steps before drilling

  4. If needed, install the outriggers
  5. Align step mounting holes and secure in place with carriage bolts and flange lock nuts

    -Make sure the bracket is backed up fully against the I-beam on the chassis

    -Hardware not included

  6. Tighten hardware until snug
  7. Make sure assembly is sitting square and level
  8. Torque the hardware tight

GlowStep Accessories

Torklift Accessories

Add any of these accessories to your Revolution scissor steps for stability, eliminating gaps, and keeping your steps and RV interior clean. The GlowGuide handrail (TLA7621 - sold separately) attaches to the outside of your RV and a bracket on the bottom of the steps. This helps to steady the assembly and adds 25 lbs to the weight capacity of the stairs. The SafeStep vinyl barrier (TLA7602 - sold separately) easily fastens with Velcro strips in between any 2 steps. This prevents you or your pets from accidentally slipping between steps. The DirtDestroyer boot brush (TLA7603 - sold separately) affixes to the bottom of the steps so you can scrape your shoes before climbing into your RV.



A8006 Tork Lift Glow Step Revolution Scissor Steps for Campers, RV, and Trailers with 27-1/2" Mounting Space - 6 Stairs w/ Landing Gear





Customer Satisfaction Score:


Customer Reviews

TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 6 Steps - 27-1/2" Base - 325 lbs - TLA8006

Average Customer Rating:  4.9 out of 5 stars   (475 Customer Reviews)

8" Deep x 22" wide aluminum RV steps have an easy-to-use lever that lets you change between 3 height settings for proper elevation. Fine-tune height and level stairs with built-in landing gear legs. Glow tape creates a lighted step surface.

by:



by:



by:

We are a retired full time RV couple with 2 dogs. We have disliked our OEM steps for @ 4 years, finally made the decision to upgrade to the Torklift. Both of us have fallen a couple of times off the OEM steps. We have a 2020 Grand Design 303 RLS, we used part A8004. Fit of the Torklift steps is perfect. I ordered the steps on a Friday, go them on a Tuesday. The box looked a little rough on the outside, everything on the inside was fine. The install took about an hour. The old steps came off easy, I ended up using 14 mm sockets and wrenches for both removal and install. I watched a few videos on YouTube and read the info from the Torklift website. The supplied hardware was great. My wife helped me, so we did the two person recommendation of the manual of extending the steps to the ground. I think that was easy and quicker than removing the torklift steps from their mount. We played around with the adjustments to find a setup for our current campsite. We move anywhere from 3x/week to monthly, so ease of use is very important. My wife really likes having 4 steps over 3, and I think it will be easier for my dogs as they age. The dogs adapted quickly to the new stairs. The Torklift steps are far more stable then the OEM they replaced, even with the aftermarket stabilizer legs we installed from Lippert. I wish we had done this sooner. This was an easy upgrade that we use all the time. I do like that that quick instructions are on the front of the step so if you need some "coaching" its right there for operating the steps.



by:

Rock Solid!!! Worth every penny.

Replaced
my trailer's original springboard steps that were flexing more and more. At first, I was concerned about fit. Reached out with measurements and received an A8004 recommendation for my 2010 Montana Mountaineer. Once installed I discovered I had more ground clearance than I had with the OEM steps. Not sure if it can be seen in the front on picture, the trailer frame lower than the bottom step in its stowed position. The adjustable top step is an absolute great invention.

Had to disassemble some of the sidings to the left and right of the step mounting brackets to get at the OEM mounting bolts. Space between factory brackets expanded almost 0.5 inches once OEM steps were removed. Had to stop and get spacers. Mounted the A8004 steps with spacers on each side. My wife assisted with aligning and balancing the new steps while I bolted them in. Ignoring the other prep work that had to be done, it took me about 1 hour to actually unbolt and remove the OEM steps and bolt in the new steps.



by:

We are extremely pleased with the Torklift Glowstep Revolution (TLA8004). It is solidly built, easy to install, easy to operate, and a suitable price!

We are also extremely pleased with etrailer's customer service! Upon receipt of the new steps, we immediately noticed that one of the landing feet and one of the guide pins were bent. The shipping box did not show the type of damage that could have caused the problem.

I emailed etrailer, and within 24 hours they had gotten back to me and the replacement parts would be shipped shortly. This was all during the height of the COVID-19 virus shutdowns. About 7 days later the parts arrived and within 15 minutes I had the damaged parts replaced.

I am grateful for both etrailer and Torklift customer service. Both are exceptional!



by:

I bought the Glowstep revolution four step with landing gear.. I could not be more satisfied... took about 1hour to install by myself with the help of a floor jack, that includes removing the old steps..!! Delivery from etrailer.com was fast and free shipping.. great company to deal with.. I have included a couple of pictures of my new steps.. we love them..



by:

These steps are the best addition ever to our 5th wheel (except for the Truma tankless water heater). A snap to use, and a solid grounding.



by:

I installed the steps on a 2019 Grand Design Reflection 311BHS. I was very pleased how easy it was to remove the old steps and install these new steps. I used the one person method described in the owners manual that came with the steps. Very easy. Being set on the ground will make these steps more stable, then the factory installed steps. I was also very impressed with etrailer. The steps were shipped the same day that I placed the order. I received them in a short period of time. I have always been impressed with ordering things from etrailer.



by:

Took longer to remove old steps than to install scissor steps. One man job with screw jack and scrap 2X4s. Much easier to enter and exit trailer now. Wife is very happy for the upgrade!



by:

Great product! Easy to install and very sturdy on my Grand Design Reflection travel trailer! I am including before & after photos, and one including added step covers and extended handrail replacement.



by:

Install was easy though I did have to drill two holes in the existing brackets to clear bolts on the steps. This is mentioned as a possibility in the directions. If doing the install alone take the steps off the frame as noted in the directions for ease of install. Steps are sturdy as shown in numerous videos. The adjustments are easy for both the top and bottom. The only thing I'm wondering is if the two plastic catch doohickeys are supposed to be bent down as visible in the photos. I replaced a 3 step set with these because they were very bouncy and my old dog had a hard time negotiating the steep steps.



by:

Product arrived on time. All parts in the box and in excellent condition. Installation was a breeze. Fit was perfect. Thanks Amy J for getting us the right one that fit our 5th wheel. As always with etrailer great customer service and on time shipping and great products that work. Would highly recommend etrailer for all your DIY projects on your camper.



by:

Installation was simple and straight forward. It fit my Open Range like a glove. All things included i spent 1.5 hours start to finish (one person) I am very pleased with the operation of the steps. I have only had it on a smooth and solid surface but I can see the adjustability in the steps will fit any surface.



by:

The Torklift Glowsteps are GREAT, but it took 2 weeks from the time I ordered them to install the steps. Don't let that scare you. I'm 68, was working by myself, and have been disabled for 29 years, and I doubt anyone else will experience all the difficulties I did to buy, have delivered, and install the steps. I measured according to Torklift and etrailer instructions, and ordered the 4-step, 27 1/2-inch frame TLA8004 from etrailer, because that was the width of the original steps' frame. I also ordered the TLA8022 Vertical Stud Adapter Kit. When the steps arrived, the UPS driver had the step box sitting on what was the top, because the bottom had become completely un-taped during shipment. The steps and their frame were still in the box, but the owner's manual, installation instructions, warranty card, and hardware kit were not. The Stud Adapter Kit was in its own separate box, and was intact. While the steps were here, using a wood platform I built, I lifted them up into our trailer's step well with a floor jack to check the fit. That's when the REAL nightmare began. We had an industry-standard 27 1/2-inch step frame on the original steps, but the manufacturer had placed both the vertical studs in the floor at a steep angle, instead of perfectly vertical. The factory had bent the original step brackets to make the original suspended steps fit the brackets. But the Glowstep frame fits MUCH higher up, next to the floor, and there was no way the 27 1/2-inch Glowstep frame was going to work with those angled studs and our narrow step well. So when they reshipped another set of steps, I asked etrailer to replace the steps with the TLA8104 4-step (same price), which has a 25 1/2-inch-wide frame. I also ordered the TLA8020 Spacer KIt to use with the TLA8104. Problems like the shipping snafu and the stud problem are why I deal with etrailer, and my previous order history with the company is about an arm's length! Hally C. , Lisa D., and John R. were all VERY helpful in helping me to resolve my problems. They contacted UPS to pick up the original steps at my home (after I repacked and solidly retaped the box). In 2 days, UPS picked up the original steps (I kept the stud adapter kit). Next day, UPS delivered another set of Glowsteps with 25 1/2-inch frame, this time with an etrailer box stapled COMPLETELY around the Glowsteps box, and VERY securely stapled with 111 BIG staples!! Then the fun began. Due to disabilities and medications I take I can't be exposed to high heat for long, or I will pass out and/or be unable to walk into the house to cool off, and our heat index in Central Texas has been running in the +100 degree range. Actual temperatures in our metal RV garage have been running 110-117 or more from noon to about midnight. I had to make some small modifications in order for the step frame to fit on the angled (non-) vertical studs on our trailer. I do NOT recommend anyone else modify ANYTHING. But I was determined to get us some premium steps that were easier to climb at our ages, and warranty was NOT one of my concerns. In our tight RV garage we CANNOT use the pivoting steps that store inside that are becoming popular. The Glowsteps were our only option, so I HAD to make them fit. These steps are built like a tank anyway, so I can't imagine ever needing the warranty, only insurance, if the steps are damaged by some outside force. I still had spacing difficulty, so I ended up having to straighten the factory-installed step brackets that the factory workers had bent, and drill them to match the mounting holes in the Glowstep frame. Then I had to paint the bare metal exposed by the work I had to do. When I finally finished all this, and jacked the step frame up into the step well, everything fit perfectly, and I had access to all the hardware. Tight clearance between our trailer side and the RV garage wall is the reason we could not consider the pivoting steps which pivot up and store inside the doorway, and I'm glad to say that even though we can't extend the Glowsteps out all the way due to the metal framing of the garage wall, the steps are rock solid and can be easily and safely used in just about any position. I have bad knees, and my wife has a bad hip, and the difference these steps make in allowing us easy entry and exit from our trailer is like the difference between night and day from the original shaky, suspended factory steps. My wife's sister and 94-year-old mother have their own trailer and camp with us, and even my M-I-L can easily get in and out of our trailer now, with the Glowsteps. She has never liked having to climb into our trailer with the original steps, even with a folding platform at the bottom. The "rise" on our steps was just too much for many of us. She does have to use the assist handle on the wall for balance with the Glowsteps, but she has to do that on any trailer, even my niece's 5th-wheel, which has the pivoting, store-inside-the-door steps. The Glowsteps are NOT inexpensive, and I had no idea of the trouble I was about to run into in installing them, due to the angled (non) vertical studs installed on our trailer at the factory, and the limited space in our enclosed step well. But now that the blood, sweat, and tears are behind me and the Glowsteps are installed, I don't think that my wife and I will EVER regret making this upgrade to our trailer, which is our preferred (and ONLY) recreation, that we've enjoyed immensely for 45 years! THANK YOU, ETRAILER, and THANK YOU, HALLY C., LISA D., AND JOHN R. YOU ARE LIFESAVERS!!



by:

these steps are awesome. Very adjustable don't need to worry about the hard sidestep swing if your door opens these steps will be able to be used.



by:

Installed in less than a half hour!!
One
thing I would recommend, is to not take the unit apart as the instructions tell you to.
Simply use a floor jack with a 2x4 on top of it to lower down your old unit and raise the new unit will save much time--not taking your brand new unit apart!!
Also if you have pets installing carpet on the steps will save their feet from getting burnt in the summertime-that aluminum is going to get very very hot



by:

Bolted right up to the factory bracket on my new to me 2021 Lance 1172. The tools laying around are for another project. Step installation required a 9/16 wrench and socket/ratchet. Thanks Shelia!!



by:

We really love these steps on our camper. It took a little bit to get them on the camper. I had to take the old steps out and disconnect the steps from the box and then cut the bottom half of the box off. I then could put the top of the box on top of the new steps and mount them under the trailer. it sounds kind of like a redneck way to put them on but it worked out well.



by:

Took just a little bit of time to install. I was by myself and ended up utilizing a small floor jack with board to hold it in place while I bolted it in. Well, it was very worth the time. Will order and install on new camper once I purchase it. HIGHLY RECOMMEND!!



by:

I love these steps! There is nothing like them in the market. I found these about 2 years ago but did not make a purchase due to the high cost. As we age, being comfortable is always more important than cost. So I finally made the purchase and could not be happier. These steps are way easier to use than the stock ones! Definitely will be easier on my knees and feet. Steps are very well made and seem like they will last for many years! The true test was my wife and she loves them!

Install was moderate. Came with 3/8 and 5/16 bolts to be used depending on which holes you plan to use. Had to go to local hardware store to get longer 3/8 bolts. The 5/16 are longer but too skinny in my opinion. Had to use the provided spacers as well so the steps could fit snug in the mounting bracket of the trailer.



by:

Exactly as described and what we wanted. We have purchased from etrailer before and this experience was excellent , as were the rest! Also, we have used Torklift products before and this is a quality product as well. Transaction was fast, shipping was fast and the install was easy and came with all the parts and was well packaged to avoid damage during shipping.



by:

Would of gave 5 stars but the steps , arrived damaged, no fault of etrailer, probably Torklifts packing or the Shipper. Latches were bent so bad you couldn't even get the steps out and the frame was also bent and leaning to one side. A 2 pound sledge straightened things out but for almost $XXX you shouldn't have to fix it. Too big to mess with trying to send back but got it taken care of.



by:

The entire step purchase was Great ! Order arrived quickly and was packaged very well. The installation was on our lance 2285 and couldn’t have been any easier. After removing the old the install took 5 minutes. No drilling or modification needed , 4 bolts lined up perfectly. Quality of the steps was second to none. We originally purchased a step that lifted into doorway , halfway through the install realized entry screen door needed modifying , didn’t like that idea. Also did not care for steps folding into camper. Returned to vendor and purchased the Tork Lift Revolution from etrailer and couldn’t be happier with new steps.



by:

Bought a new Lance RV, Model 1995. The steps were horrible. Installed the Glowstep Revolution steps and it made a world of difference. I installed them myself in under an hour following the instructions and using a small jack to hold the frame up while I bolted the steps to my RV. Had to use the two enclosed spacers but the installation was a cinch. Couldn't be happier with the steps and with the assistance from etrailer which is a great company with terrific support.



by:

Best steps out there. easy install and they solid and well made. Love the ground contact adjustable feet feature of this design


25
475
Show More Reviews

See what our Experts say about this TorkLift RV Steps

  • Larger Mounting Options for Lippert Steps
    Good news, I can help you find a wider step than the 24 inch LC341504. I've linked all the steps for you but if you look through the filters there should be a measurement column and there are sizes from 14 inches to 30 inches wide. The Lippert Steps are made for RVs which is why they are the 24 inch wide spread. I have something similar that may work for you that has brackets that have a variety of widths. The TorkLift Glow Step has a variety of steps like the # TLA7803-8000 that is...
    view full answer...
  • Recommened Steps for Work Truck with Entry 52 Inches Off Ground
    I have a solution for you, but there aren't going to be any steps that will have a capacity of greater than 325-lbs that you're going to be able to use for something 52" off the ground. I'll also add that the TorkLift GlowStep # TLA7834 you mentioned aren't going to be tall enough for your truck since it is designed for entry heights between 31" and 42". For something that tall off the ground you will need a 6 step setup like the TorkLift # TLA8006, which only has a 325-lbs capacity,...
    view full answer...
  • Is There A 6-Step RV Scissor Step With 28" Wide Steps
    The 6-step models of the TorkLift GlowStep Stow N' Go line come with a maximum 20" wide step like part # TLA7836 has. The largest 6-step model that we currently offer is the GlowStep Revolution Series # TLA8006, which has a 22" wide step. This has a larger mounting base at 27-1/2" or you can get the # TLA8106 which has a smaller mounting base at 25-1/2". Both steps have an entry height range of 46-1/2" - 60", whereas the Stow N' Go has a 46-1/2" - 58" range. With how these steps mount...
    view full answer...
  • replacement stairs for Eagle Cap 1165 Truck Camper
    You will need two measurements to determine the best fit for your camper. First is the "Entry Height". This is the measurement from the top of the mounting bracket to the ground. See the example picture on the product page. The TorkLift # TLA8006 that you referenced is suitable for entry heights between 46-1/2" to 60". The second measurement is the "Mounting Bracket Width". With the old steps removed, there will be a black metal mounting bracket that held the old steps. If yours measures...
    view full answer...
  • P/N TLA8003 Torklift Glowstep Revolution Dimensions
    I spoke to my contact at Torklift and he informed me that the left to right width of the mounting bracket of the Torklift Glowstep Revolutions like the part # TLA8003 is 27-1/2 inches and the front to back depth is 12 inches. All of the Torklift steps that begin with the part number TLA80XX are 27-1/2 inches wide and the ones that start with TLA81XX are 25-1/2 inches wide.
    view full answer...
    Image 1 for
  • Recommended Steps for Schoolie Conversion with 46" Entry Height
    I have a solution for you to solve the step conundrum that you're in, but your assumption is correct; the MORryde # MR88RR are also the tallest available option as far as fold up steps go and they would only work on entries up to 42". If your entry is in the 45"-46" range then these would not be an option. Your best bet is going to be using something like the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 6 Steps - 27-1/2" Base - 325 lbs # TLA8006 which can be used on entry...
    view full answer...
  • TorkLift GlowStep Scissor Steps For a 9.6 BigFoot Slide In Truck Camper
    The TorkLift GlowStep Revolution Scissor Steps # TLA8006 are designed to replace the fold out style steps most commonly found on 5th wheel type trailers. For your BigFoot truck camper you would want a system like the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7846 which is also a 6 step unit like the one you found. This is designed for an entry height of 46-1/2" to 58" tall and is designed to mount on the outside of the camper just below the door. The steps will snap...
    view full answer...
  • Replacement Steps Recommendation for a 1968 Airstream Trailer
    I really like the TorkLift GlowStep Revolution Scissor Steps because they are easy to use and come with landing gear so the steps are more stable than your standard steps that hover above the ground. The correct part number depends on your mounting bracket width as well as the height of your door: 25-1/2" Width: 18-1/2" - 28" # TLA8102 25-1/2" - 36" # TLA8103 32-1/2" - 44" # TLA8104 39-1/2" - 52" # TLA8105 46-1/2" - 60" # TLA8106 27-1/2" Width: 18-1/2" - 28" # TLA8002 25-1/2" - 36" #...
    view full answer...
  • Availability of Scissor Steps/Folding Steps 80
    The tallest folding steps we have are the TorkLift GlowStep at 60" hieght, this is a scissor steps design with landing gear. Both are 6 steps with the # TLA8006 being 27-1/2" width and the # TLA8106 a 25-1/2" width. In the SolidStep Quad, # LC791574, this is a manual fold-down steps for 25" to 28-7/8" RV Door Frames with a max height of 44". Neither of these designs are intended to stack. Something of the height you are looking for would need to be custom fabricated of either a new...
    view full answer...


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Dustin K
Video Edited:
Dustin K
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Halie H
Updated by:
Halie H
Employee Isabelle B
Updated by:
Isabelle B
Employee Chelsea B
Written by:
Chelsea B
Employee Brent H
Installed by:
Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.