Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black
(1751 reviews)
Price: $168.82
Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black
Retail:$177.73
Our Price: $168.82
You Save: $8.91
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (1751)
- Q & A (0)
- Photos
etrailer Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- 18 Inch Lift
- etrailer
- Bolt-On
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 27-1/2", and 18" of screw travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle.
Features:
- Electric jack lets you raise and lower your A-frame trailer
- Drop leg allows for increased lift and saves time when raising or lowering
- Pin and clip holds leg at desired location
- 2 Toggle switches on the front of the housing let you operate the jack
- On/off switch controls light
- Extend/retract switch controls up and down movement
- LED light illuminates at a downward angle to help you focus on your coupler
- Emergency crank (included) allows you to manually operate jack if needed
- Requires a 3/8" socket to use the manual crank
- Black powder coated outer tube
- Zinc-finished inner tube and footplate resist corrosion
- Simple, bolt-on installation
- Wires to 12-volt power source
- 12-Gauge wires
- Serrated washer included for ground connection
- Wires to 12-volt power source
Specs:
- Bracket height:
- Retracted: 9-1/2"
- Extended:
- 27-1/2" Without drop leg
- 35" With drop leg
- Total lift: 25-1/8"
- Screw travel: 18"
- Drop leg travel: 5-5/8"
- Clearance:
- 20-1/2" From bottom of bracket to top of jack
- Outer tube diameter: 2-1/4"
- Inner tube diameter: 2"
- Hole spacing on drop leg: 1-7/8"
- Footplate diameter: 5-1/2"
- Lift capacity: 3,500 lbs
- 1-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
EJ-3520-BBX Ram Powered Jack w/ Footplate - Drop Leg - A-Frame - 18" Screw Travel - 3,500 lbs - Black
Item # EJ-3520-BBX
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Defective
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black - EJ-3520-BBX
Average Customer Rating: 4.7 out of 5 stars (1751 Customer Reviews)
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 27-1/2", and 18" of screw travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle.by: 10/17/2023
Great product and Trailer has great customer service. It's to bad that the shipping companies do not take better care with the items during shipping! will receive replacement parts to fix what was broken, but it causes lots of extra work for the customer. will have to take complete jack off to replace the broken motor cover because of shipping carelessness!!
regards,
Dan Ewert
by: Bradford05/20/2023
This was a replacement jack for another brand that I also bought at trailer. The other one failed from new. etrailer was extremely helpful and resolved the issue promptly. This one works and I am pleased.
Bradford
5/21/2024
The jack is working fine after a year. I keep it covered with a five gallon bucket since I have outside storage.
by: Jim08/25/2022
This little rig has teeth! Much faster than i expected. About a 30 minute installation from old lift removal to new and wiring. Super simple. Great addition to my hangar 18!
Jim
8/30/2023
Still going strong. I like this little guy a lot!
by: Jimmy06/10/2019
This was purchased for my 24 foot enclosed car hauler. Overall I think this is a decent purchase, priced under $120.
The fuse should come from the factory with dielectric grease packed in the little holder as it is located outside of the housing and it's in a pretty rough environment. The power lead length is plenty long for connecting to either a battery mounted on the tongue or service box that all of your trailer wires go into- This is where I wired mine into. I actually used a grommet to plug the hole that the manufacturer ran the power wire through and drilled another hole on the other side so the wire would run straight down the correct side of the jack and into the service box.
One of the screws that mounts the black housing on to the metal frame was pulled through by the time it arrived, so I am used washers when I reinstalled them to help prevent this from happening again.
Other notes:
I will need to get a longer hitch now, as my tailgate will hit the jack housing, and I did purchase a cover for the jack from the recommended bar at the bottom when I purchased this jack.
Final:
I've only cycled it up and down twice but it worked nicely and quietly so overall I am very pleased with my purchase
Jimmy
3/23/2021
Still working well, over a year later. From -30f to 90f and I havent had an issue, except for the light lense got busted. I keep a cover over it which I believe 100 makes a world of difference.
Jon G.
3/25/2021
If your light lens is still busted you can get it replaced with the Replacement Cover # EJ-3520-BCV.
by: Leland 01/16/2023
Install was easy enough. Getting through the second hole at the bottom of the A frame was a bit of a challenge (paint/powder coat made it a very tight fit. A little filing around the edges of the hole and the jack tube resolves that. Drop leg is a very nice feature! Jack moves a little slower than I had anticipated (thus the 4 stars). Overall, I’m pleased with it and it definitely made hooking up to the load leveling hitch MUCH easier.
Leland
1/17/2024
Jack is still performing well and meeting expectations. Still wish it moved a little quicker but, aside from that there are no concerns with quality and reliability.
by: Thomas10/09/2023
My Jack arrived DOA. After installing it on my trailer, the Jack didn’t work. The manual crank handle came in handy because I didn’t have time to troubleshoot and repair it at the time. It was just a wire that was no longer connected to the switch but I have to tell you it was extremely disappointing to receive a brand new item that didn’t work. If it had worked out of the box, I’d give it a five star review. You should consider soldering and heat shrinking the wires to the switches or making the wires longer so they aren’t banjo string tight and putting the lug at a strange angle.
by: David08/26/2021
Jack is fine, mechanically and electrically. But the plastic lens over the LED lamp would not fit properly, no matter what I did. So I had to use silicone caulk to seal it up.
David
8/27/2022
We actually sold that trailer, so I have no idea.
by: Richard03/24/2024
I hope that third time is a charm. The first one I got several years ago, had a short circuit causing the battery in the camper to explode and also damaged some wiring. The next on was one that could be plugged into the 7 prong trailer plug on the towing vehicle. The motor would not raise or lower the trailer, intermittatly. Will be installing #3 shortly (connects directly to the battery), and I hope it lasts more that a couple years. Suggest that fuse to the lift be placed on the HOT side, not the Ground side.
by: Jay07/30/2022
I will give 10 stars to etrailer and its employees. My 1st replacement jack didn't make out so well after a trip on the Long Island Expressway. I contacted the company, and a replacement was on the way in short order. Thank you!
The product itself does seem above average and appears great for the price point. Very easy install. I suggest taking your time with the electrical connection and hooking right up to the point of contact instead of a splice if you can, there's plenty of wire. I now cover the unit with a plastic bag, as my original lasted only 5 years and the insides were all waterlogged and rusted when it failed.
by: Spencer 10/08/2022
Works very well on our Lance 1475. My reason for giving it less than 5 stars is the wiring provided for the positive lead. It’s too short to run it properly secured between the jack and the battery box, the manufacturer should add another 12” or so. I had to splice more wire in to make the connection and be able to secure the wire along the trailer frame. Also, a little heavier gauge wire would be a good idea for the amps this unit is pulling. Other than that, the form, fit and function are perfect.
Spencer
10/9/2023
Still working perfectly after a year of use, and perhaps 10 camping trips. Definitely great value for the money. I did purchase the vinyl cover to protect it, and just leave that on all the time.
Mike L.
11/2/2023
@Spencer Good deal, we're glad to hear that your # EJ-3520-BBX electric trailer jack is working well for you!
by: Nate03/02/2024
Trailer Jack works great for my trailer. Easy to install and I like the LED light.
by: ZBean03/16/2024
Simple to install and such an improvement over the manual jack. Overall an awesome trailer jack for your TT!
by: Janice12/11/2023
Bought this as a Christmas present for my son. Installed it July 5 and we went camping. Went camping again 2 weeks later no issue. Went a third time the beginning of August and as it was lifted to put onto his car ( Lincoln ) it slammed down thank god landing mostly on his hitch. The pins or what ever inside sheered off making it unusable. My husband emailed the company when we got home from the trip, no responds. He emailed again October, no responds. I got my “ it’s been a year, how do you like it “ email. I respond with the above. NO RESPONDS. It wasn’t cheap, it was more powerful then he needed for his size camper and it broke after TWO uses. We were hoping they’d offer and exchange but. NOPE, NO RESPONDS. VERY disappointing.
by: Curtis 10/05/2022
My second jack from etrailer, previous jack was very dependable and worked very well for years.
This one will replace the previous jack which as damaged by user forgetting to retract it before attempting to drive off, no fault of the previous jack. etrailer service, quality and price is fantastic.
All of my RV club fellow members are etrailer fans.
Curtis
10/6/2023
Excellent, very dependable, great product at a great price
Mike L.
10/19/2023
@Curtis We're happy to hear that your # EJ-3520-BBX electric trailer jack is working well for you!
by: CF05/15/2023
So far disappointed, customer service. The box was opened and damaged on the front step. I can't tell what is missing because there is no parts list. The instructions were torn and the 57" wire has vanished into the abyss because the one attached is 47" . Sure this is just a mistake but the quality controls and customer service so far is less than desirable. I have emailed Nicole and Alexzandar with pics, per their request. I asked Alexzandar if I could start a return and he said sure I would get a separate email and the shipping of $XX.XX would be deducted from my refund. Support your local dealer this was not what I was expecting from this site.
Jenny N.
5/19/2023
I sincerely apologize how this was handled for you. I will have this reviewed and Customer Service will be in touch.
by: Matthew10/27/2023
As always, I was extremely impressed with the customer service and efficient shipping of my order.
My first stop is always etrailer!
by: Terry02/04/2022
The jack works as advertised. It is strong enough to raise the back of the truck to make it easy to set the chains on the weight distribution hitch. The only design change I would make is to have the motor on the aft side (trailer side). I can no longer lower the tailgate on the truck when hitched. But for function, it is great! I also wired in a single pole, double throw switch (with a center off position) so I can use the trailer battery when not hooked to the truck. The switch is mounted inside the trailer and in the center off position it isolates the jack so no one can operate it when unattended. I would definitely recommend this jack to anyone.
Terry
2/6/2023
Totally satisfied with the jack. Works great and my trailer comes in at over 7,000 lbs. I was able to turn the motor assembly 180* and now I can lower the tailgate on the truck. this might no work on trailers wit propane bottles on the toung. I would definitely recomend this jack to anyone
by: Noah07/30/2022
Easy install for somebody reasonably handy but the lack of visuals (even when the instructions say to “see picture” that isn’t there!) is unfortunate. The instructions are also confusing because they talk about installing the fuse as close to the batteries possible for the fuse comes hardwired. It seems like they probably revised their design but did not improve their instructions. The instructions are also confusing because they talk about installing the fuse as close to the battery as possible but the fuse comes hardwired. It seems like they probably revised their design but did not improve their instructions. Still it’s a great deal and seems to work well.
Not uploading pictures because it looks exactly as advertised and exactly as in all of the other pictures.
I got the recommended matching cover and if it’s great.
Noah
7/31/2023
After a year, it still works well. Wow, there were a lot of typos in my original review but hopefully clear :D Must have done it on my phone.
by: Brad 02/06/2024
Jack used on an older Airstream (25') with propane cover. There is less than 3/4" between jack shaft and cover face. This unit was the only unit I found that would not hit the cover. The vidio and pictures helped determine this unit would fit.
by: John 02/09/2018
Very solid and heavy duty jack, with bright LED lighting, manufactured by Ram. Adjustable foot piece for quicker adjusting... Jack pretty easy to install, with single wire electrical connection and 3 bolts. Jack has low gear ratio and foot shaft moves slowly, but has plenty of power to lift front of trailer. Plenty of clearance behind jack for propane tank cover on our Airstream. Replaced more expensive model that was bent at mounting flange being winched onto transport trailer.
John
2/9/2019
Jack is still slow and steady and has worked perfectly since installation... The adjustable foot unit is about an inch too tall for at lowest position some sites, based on low hitchball height of our tow vehicle, but we have used the shorter foot from prior jack as an alternate, and that solved problem...
by: Andrew09/25/2023
If I were to review this product a week ago, it would have been a very different review. I bought this a year ago to replace my jack on my camper. I installed it at the end of last season and it was only used starting in May of this year. It started out great. I had no issues with raising and lowering the camper (a lot easier than a manual jack!). However, right before it was a year old, it stopped working. There was still power going ot the jack, I tried to change the fuse, nothing worked. I knew that i was still under warrenty, so we called etrailer. They were not helpful one bit. I was hung up on after i was trying to understand why i was going ot have to pay to ship this jack back to them before they would ship me my replacement. Mind you, i am still under warrenty. I don't have another jack for the camper to sit up on. So i was asking how i would do this. She was not helpful one bit and hung up. We called back and asked to speak to a manager, and he just said it was industry standard for customer to pay to ship the items back. So because they sold me a faulty jack, wanted to take no responsibility for making sure they are selling quality products, they are making me spend more money because i trusted them. If you want to try your luck with buying from this company, go for it. However, i never will again after this horrible experience we have had.
by: David09/06/2019
Haven’t really use it yet. Install was easy enough as far as jack. The lower plate with hole did not line up perfectly with upper plate hole. Had to do some filing for jack to fit properly. Shipping was fast considering it was over a holiday weekend. I am very pleased with etrailer. I also purchased the jack cover to keep the weather off of the jack. I am sure it will be money well spent.
David
9/7/2020
The jack has worked flawlessly
by: Robert05/02/2023
I have been more than happy every time that I have used your services. Products are always exactly what I needed. And I appreciate the timely shipping of materials. Thanks
by: Gary D.04/24/2018
Installed the new RAM electric tounge jack on my enclosed car hauler trailer. Very happy with this unit. Quick install, like the adjustable foot pad, and operated smoothly. etrailer packages well and deliveries quick.
Gary D.
4/24/2019
Working great. No problems to report. Highly recommend this product and your business! Thanks
by: Mike B04/16/2018
The Jack seems to be great quality and was very easy to install. At first I was a bit perturbed with the lack of detail and small font of the one page directions, but it’s as simple as 3 bolts and one wire to the battery(the hack is grounded inside). It raises my 2017 Jayco Baja much higher than stock crank jack. I hope it lasts the test of time as I am very happy with it this first day. The light seems bright as well.
Mike B.
4/17/2019
After a year it still works great!!! Looks good and works like a dream!
25
1745
Show More Reviews
See what our Experts say about this etrailer Camper Jacks
- Troubleshooting Husky A-Frame Jack Not Moving with Manual Hand CrankIf you've ensured that the brake is off and you still aren't able to get your Husky jack to move then it sounds like you need to replace your trailer jack as the internal components are damaged. You can either replace it with another standard electric jack like the etrailer Electric Jack w/ Footplate # EJ-3520-BBX which is rated for 3,500 lbs, or you can go with an upgraded A-Frame jack like the Phoenix Electric Trailer Jack with Remote # UF38-944055 which is rated for 5,500 lbs, comes...
view full answer... - Availability of Wheel to Use on etrailer.com Electric Jack w/ Footplate # EJ-3520-BBXThe etrailer.com Electric Jack w/ Footplate # EJ-3520-BBX referenced in your question features an inner tube diameter of 2 inches. With this in mind, the Replacement 6" Caster Wheel # BD500245 will work well to replace the footplate on the jack, since it is designed to fit 2 inch jack tubes. Keep in mind though, that when using the wheel on your jack, its 3,500 pound capacity will be reduced to the 1,200 capacity of the wheel. This is simply because the trailer jack will be limited by...
view full answer... - Troubleshooting 3,500 lb Trailer Star Electric Trailer JackIt is possible for motors to go bad, but it is very probable based on your testing that the gears or shaft are the issue and the reason the motor is not able to operate. If it was over extended or retracted the shaft in some jacks can bind causing it to seize up. Most electric jacks don't have replacement parts for that, so I recommend getting a new jack with a clutch that will keep the over extending or retracting from being an issue. My recommendation is the Electric Jack w/ Footplate...
view full answer... - Recommended Electric A-Frame Jack for a 2011 Keystone Passport TrailerYes, an electric A-Frame jack rated for 3,500 lbs is an excellent option for your 2011 Keystone Passport! I recommend using the Electric Jack w/ Footplate # EJ-3520-WBX because it offers the highest lift at 25-1/8" which can help if you use a weight distribution system. The included drop leg allows you to quickly add 5-5/8" of that total lift so that you don't have to wait as long for the jack to raise up. This jack features a toggle switch for operation as well as a light to help when...
view full answer... - Fuse Location on etrailer.com Electric Jack # EJ-3520-BBXOn the etrailer.com Electric Jack w/ Footplate # EJ-3520-BBX that you referenced the 30 amp barrel fuse like # EJ-FUSE is located in a flared opening right where the black power wire comes out of the motor housing. It is very easy to access and replace if the need arises. I have attached a short video demonstration on this jack that you can check out as well.
view full answer... - Replacement Electric Jack For A Ram 3.5K Trailer Jack That Is Missing The Manual Override NutI went ahead and checked and unfortunately the nut is not replaceable and in this case the best solution is to replace the entire jack with the: -Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K # EJ-3520-BBX. This jack has two toggle switches for operation, has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. This jack also has a maximum lift capacity of 3,500-lbs a simple bolt-on installation, and will wire to a 12v power source.
view full answer... - 2006 Jayco Jay Flight 31BHDS Electric Tongue Jack RecommendationTo add an electric trailer jack to your 2006 Jayco Jay Flight 31BHDS I recommend using one of the following depending on if you want to tie the power into your trailer battery bank or not: - Battery Bank # EJ-3520-BBX - 7-Way Power # EJ-3527-BBX Both options bolt onto your trailer A-Frame using the industry standard bolt pattern and the only difference is how you want to power the trailer jack. The first one is connected to and pulls power from your trailer battery bank while the second...
view full answer... - Options for Replacing Lippert Power Drive Tongue Jack 1817941It sounds like you're looking for a replacement internal component for an older/discontinued Lippert electric jack like model number 1817941. According to Lippert, the internal components are not serviceable on these types of jacks, which means they are not available separately or even have a part number assigned to them. When something like that fails, it's just safer to replace the entire unit as other integral parts tend to go soon after. The only solution is to replace your jack...
view full answer...
- Recommended Electric Jack for 7K TrailerThe tongue jack only supports the tongue so it won't need to be rated for the full weight of the trailer. The tongue weight is typically 10-15% of the gross weight. For example, for a 7,000 lb trailer you need at most a jack rated for 1,050 lbs. I recommend the Electric Jack w/ Footplate part # EJ-3520-BBX which is rated for up to 3,500 lbs. It has a light for use at night, features a bolt-on install, and comes with a manual crank handle.
view full answer... - Dimensions From Bottom of Housing and Motor to Bracket of etrailer 3,500 lb Electric JackWe do have the measurements you are looking for on the etrailer 3,500 lb Electric Jack. From the bottom of the housing to the bracket the measurement is 14-1/2 inches, and from the bottom of the motor to the bracket the measurement is 10 inches. These measurements are the same for both versions of the jack, with the only difference being the color they come in. - Black: Electric Jack with Footplate # EJ-3520-BBX - White: Electric Jack with Footplate # EJ-3520-WBX
view full answer...
- Ram Jack Stopped Working but Light Still Comes OnIt's possible the switch has failed again but if you bypass the switch and apply power directly to the motor, you can rule this out. If the switch is bad again then you can use part # EJ-3520-PSW but if the jack does not work when there is direct power applied that means the motor is bad and the entire jack would have to be replaced with the Electric Jack w/ Footplate part # EJ-3520-BBX.
view full answer... - Does Electric Jack w/ Footplate # EJ-3520-BBX Come with LED LightYes, the Electric Jack w/ Footplate # EJ-3520-BBX that you referenced does come with an LED light built into it which is turned on with a switch on the front of the jack.
view full answer... - How to Determine if 3,500 lb A-Frame Trailer Jack is Rated Properly for TrailerBased on my research a 30 foot 2013 Milan Eclipse, has a maximum GVWR of 6,200 lbs (there are a number of models, and some have lesser GVWRs). This means that the trailer's tongue weight is going to be under 1,000 lbs, so the 3,500 lb rated # EJ-3520-BBX has more than enough capacity for the trailer. Determining if the capacity of a jack is right for your trailer is actually pretty simple. The weight rating of the jack only needs to be rated for the tongue weight of the trailer, which...
view full answer... - Replacement Light Board for an EJ-3520-BBX Electric Jack w/ FootplateYes, for the Electric Jack w/ Footplate # EJ-3520-BBX, we do have the Replacement Light Board for etrailer Electric Jack # EJ-3520-LT.
view full answer... - Will Electric Trailer Jack W/ Footplate EJ-3520-BBX Fit A 2009 Jayco G2 27BH 29 Camper?It sure will! The Electric Jack W/ Footplate # EJ-3520-BBX you were looking at will be an exact replacement for the a-frame trailer jack on your 2009 Jayco G2 27BH 29' Camper. Based on the information I was able to find on your camper it has a GVWR of 7500lbs which means it should have between 750-1125lbs tongue weight when fully loaded, so the 3500lb rating on the # EJ-3520-BBX will be plenty leading to a long life. I included a video of the # EJ-3520-BBX for you to take a look at.
view full answer... - Recommended Trailer Jack Options For 1993 Jayco Eagle CamperFor your 1993 Jayco Eagle camper weighing 6800 lbs, I am not sure if you need an A-frame tongue jack for a travel trailer, replacement landing gear for a 5th wheel, or stabilizer jacks. The side jack makes me think 5th wheel or stabilizer jack but I will give all recommendations. If your 1993 Jayco Eagle is a 5th wheel trailer, I recommend the Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs # LG-1. This landing gear has a leg length of 29-1/2 inches with...
view full answer... - Will Electric Trailer Jack W/Foot Plate EJ-3520-BBX Work On 7000lb Pressure Washing Trailer?Yes, The Electric Trailer Jack With Footplate # EJ-3520-BBX will work perfectly on your 7000lb pressure washing trailer. This jack has a 3500lb capacity, and since it is only picking up the tongue weight of your trailer it will a rating that is plenty high. Since your trailer weighs 7000lbs it should have between 700-1050lbs tongue weight. I included a video of the # EJ-3520-BBX for you to take a look at.
view full answer... - Are There Replacement Button Panels Available For The Lippert Smart Jack The button panel on the Lippert Smart Jack Electric Trailer Jack # LC643589 unfortunately is not a replaceable part. If yours no longer works then the only option would be to replace the jack. If this is the case for you the I recommend switching to a jack where replacement parts are readily available like the Electric Jack w/ Footplate # EJ-3520-BBX.
view full answer... - Can the Electric Jack w/ Footplate Be Rotated Yes, you can rotate the Electric Jack w/ Footplate part # EJ-3520-BBX in one of three ways so that the controls face forward, back to the right, or back to the left. Just remove the nuts/bolts, rotates, then reinstall once you get the jack in the correct orientation for your setup. The jack mounting holes are symmetrical.
view full answer... - Recommended Electric A-Frame Jack for 2006 Eclipse Attitude 21AK Travel TrailerWhen selecting a powered tongue jack for a travel trailer like your 2006 Eclipse Attitude 21AK it is best to over-spec the jack, meaning to select one that has more weight capacity than you absolutely need for the trailer. The Attitude 21AK has a specified weight of 6100-lbs so I suggest a tongue jack rated for 3500-lbs. This will let the jack work less hard to do the lifting it needs to do and that tends to help such items last longer. If value is a key factor in your decision go for...
view full answer... - Replacement Foot for etrailer 3,500 Electric Jack Part # EJ-3520-BBXWe have a number of replacement parts for the Electric Jack w/ Footplate part # EJ-3520-BBX. I am not totally sure what you are referring to as the bottom plug but if it is the footplate, we have this available using the Replacement Foot for etrailer or Ram Electric Jacks part # EJ-3520-FT. If this is not what you are referring to them please just let me know or send a photo pointing out what you need replaced.
view full answer... - Troubleshooting Ram 3,500 lb Trailer Tongue Jack Working IntermittentlyI reached out to my contact at Ram and he said that their electric jacks, like part # EJ-3520-BBX, # EJ-3520-WBX, or # EJ-3527-BBX have one fuse and it is located on the black wire where it enters the housing. From what you described I believe your problem is a bad ground. These jacks ground through the mounting hardware so if the connection isn't solid and constant it can cause the issues you are having. What my contact recommended doing was taking some of the paint off of the trailer...
view full answer... - What is Shortest 12 Volt Electric Trailer Jack Above Mounting BracketThe etrailer jack part # EJ-3520-BBX has a height of 20-1/2 inches from the mounting bracket to the top of the jack. Which from everything I looked up appears to be the shortest overall height from bracket to top of jack. This has a capacity of 3,500 lbs.
view full answer... - Best Electric Trailer Jack for a 2016 2016 Dutchmen Coleman Light Travel Trailer M-2305QBI'd be more than happy to help you find an electric jack for your 2016 Dutchmen Coleman Light M-2305QB Travel Trailer! If you're looking for best of the best then look no further than the Phoenix Electric Trailer Jack # UF38-944055. What sets this jack apart from the rest is the fast operation (extends 6" in 18.4 seconds), it includes a remote control, and it comes with a 10-year warranty if you register it within 90 days. This will hardwire into the electric on your trailer battery bank. For...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Cole B
Installed by:
Randy B
Installed by:
Bradley B
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Mike S
Written by:
Amanda M
Video by:
Zach D
Video by:
Amber S
Video by:
Thomas T
Test Fit:
David F
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Daniel C.
2/6/2024
Trailer has Great Customer service! The power trailer jack is really nice for quick change of the trailer.