Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White
(607 reviews)
Price: $196.22
In Stock
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White
Item # JET-3555
Retail:$250.96
Our Price: $196.22
You Save: $54.74
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (607)
- Q & A (0)
- Photos
Stromberg Carlson Camper Jacks - JET-3555
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- 24 Inch Lift
- Stromberg Carlson
- Bolt-On
- Weld-On
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.
Features:
- Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily
- Top-mounted toggle switches are easily accessible
- Large LED side lights make it simple to set up your camper at night
- Also ease weight distribution hookup and disconnect
- Bubble level on top of housing helps you level your trailer
- Bull's-eye design shows front to back and side to side
- Built-in clutch protects gears and motor
- Drop leg allows for greater adjustability
- Rust-resistant powder coated steel parts are strong and durable
- Housing is made of vacuum-formed plastic for protection from the elements
- White cover is painted to resist yellowing
- Round, zinc-plated steel footplate provides stability
- Emergency crank (included) allows you to manually operate jack if needed
- Easy bolt-on or weld-on installation for A-frame trailers
- 3-Star washer included to ensure good ground connection
- Mounting holes fit 3" spacing
Specs:
- Bracket height:
- 8-1/2" Retracted
- 27-1/2" Extended
- Total Lift: 24"
- Travel: 19"
- Drop leg: 5"
- Travel speed (w/ 1,000-lb tongue weight):
- Extends 6" in 32.2 seconds
- Retracts 6" in 28.4 seconds
- Clearance from bottom of mounting plate to top of jack: 23"
- Lift capacity: 3,500 lbs
- Outer tube diameter: 2-3/16"
- Inner tube diameter: 1-15/16"
- Footplate diameter: 5-1/2"
- Power wire: 10 gauge
- Motor draws 30 amps under load
- 2-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
JET-3555 Stromberg Carlson Electric A-Frame Trailer Jack - White - 24" Lift - 3,500 Pounds
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White - JET-3555
Average Customer Rating: 4.8 out of 5 stars (607 Customer Reviews)
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.by: Bob 11/18/2022
Jack works very well. Not fast but gets the job done. Unfortunately I can't lower my tailgate fully without hitting the jack. Tried to rotate the head as I saw some jacks allowed. This one won't allow that. Very satisfied otherwise. Used less than one full season so can't offer an opinion on durability.
by: Otto S.09/28/2016
Mounted quick and easy. Plenty of wire for electrical hook up. Lots of power even with a full load of water in the front tank. The only change I made to installation was longer bolts to accept washers and nuts to the bottom side of hitch. I didn't trust the taped holes in the thin hitch frame. This was no fault of the new jack. Still working strong. A back saver that's worth the money. I should have bought one years ago!
Otto S.
9/28/2017
What a wonderful invention. Caution must be used when retracting. Too bad some kind of stop isnt used. But it sure works good!
by: 08/24/2023
Put this jack on the trailer tongue in less than an hour. Moves the tongue of a 29' 6500 lb travel trailer up and down easily. I did not find it particularly slow. Install tips: I used a two ton bottle jack and static jack stand to support the tongue while working. Check trailer negative grounding with a voltage tester, just to be sure you get a good circuit. I attached power cord via fuse directly to positive battery terminal and stowed the extra wire/fuse in the battery box. (My trailer has a power line and blade-fuse from the trailer's junction box for the previous jack but it had an occasional short so I didn't use it. If your trailer has a dependable powerline for a jack, use it.) I'm putting a 10L dry-sack over the powerhead to keep out rain, road dirt and bugs. An extra layer of protection never hurts. I hope this holds up better than the factory installed L*****t. I'll write a follow up review in a year or so. And as always, thanks etrailer for great service, great prices, and fast shipping.
by: Eric03/18/2018
I purchased 2 of these a year ago to replace a hand crank on a cargo trailer. I wanted to modify the tongue of a trailer where the crank was in the way of loading and unloading a work van. The push of a button, in this case two, is way easier and much faster than old school hand power. It worked out so well, I did a dump trailer as well. Then, a friends trailer. I might be starting a trend.
by: Paul R10/07/2017
Great service from etrailer.com. Ordered the jack and a Fastway e2 Trunion hitch on Saturday, and had them at my door the following Wednesday.
Got everything installed today and all works great. I did notice that even with proper torquing, the mounting plate on the jack bent a bit under load of my Flagstaff pop-up. Works great...but I'll have to keep an eye on that mount. Directions call for an underplate, which I don't have room for on my trailer tongue.
by: Scott06/22/2018
I had this jack on my last trailer and I liked it. It is nice that it has a level as part of the cover to get you close. My trailer is 5,500 lbs and this jack has no issues with lifting the tongue. I do not like the glass fuse and holder that comes with it. The same fuse holder failed on my last trailer. So when I ordered this one for my new camper I stopped by the auto parts store and got a good quality sealed blade fuse holder. I thought I had read that this did not come with the mounting bolts. It does. I used longer bolts with additional fender washers and lock nuts. Ordering from etrailer is the best. It was convenient, easy, and the price is really good.
by: Yvon03/21/2018
Product was conform to description, easy to install and work great, I completed installation in less than 30 minutes.
Yvon
3/21/2019
My Stromberg Carlson power jack is still working well. As for all my belongings I take good care of it, that should make it work for a long time I hope...
by: Vern N07/29/2017
I ordered the Stromberg Carlson electric tongue jack from etrailer told them I needed it right away because we were traveling and mine had broke. They shipped it right away. I had it on the 3rd day I installed it and was back on the road. This is not the first time I have used etrailer and it will not be the last.
by: Christopher 05/26/2023
It works! It fit! The little bubble level on top doesn't seem to be accurate but I didn't buy it for the level anyway; price I think drove my decision.
by: Allen05/17/2019
Installed in minutes, holes lined up like they should. Just added a connection to wire and hooked it to battery and everything worked good. No more hand cranking and it looks good on the camper!
by: Larry 09/17/2022
Installed easily and I chose to power it from my truck, which meant I only had to add an RV plug to match trailer connection. Minutes later it was operational and has performed perfectly for a year. Nice smooth operation and wintered well. Quite happy! A++
by: Steve02/08/2017
I can't review the electric trailer jack since it is winter and I won't be installing it for several months. But I can rate etrailer and the order speed. I ordered the jack on Sunday evening and it was delivered Wednesday morning. No problem there!
Steve
2/8/2018
I love the jack, far less effort for a retiree and the manual jack was starting to feel like it was worn and might slip. I keep the manual jack in the trailer just in case but I had zero problems with the electric jack and used it dozens of times last summer.
by: Mark M.04/28/2019
I installed this Stromberg Carlson electric jack about a year ago. Installation was very easy (I installed it while hitched to tow vehicle - don't use your stabilizers to hold your up your trailer weight). The jack worked great on several outings last year - great time (and back) saver when setting up. However, we just bought a bigger trailer (used) and I wanted to swap this with the factory electric jack on the new trailer. The dealer agreed it was a good jack but he wouldn't let me swap. Oh well, I'll probably be replacing that one with another Stromberg Carlson soon. Also, I found the best price here of all vendors when I initially shopped for it.
by: Jeff 12/16/2022
The only thing keeping this from a 5 star review is the fact that the description says it has 24" lift but the actual fact is an 18" lift with a 5" extension foot giving it a 23" lift total. Other than that it does exactly what it says and appears to be well built. ETrailer has always provided great delivery and service.
by: Mike M.03/17/2017
After a year of use, I am still very pleased with my electric Jack. It moves up and down at a good speed. It handles the 700 lbs of tongue weight of our travel trailer with no struggle. It is relatively attractive compared to some others. The white cover matches the propane bottle cover behind it. My only complaint is I wish the lights were a little brighter. They are better than fumbling with a flashlight in the pitch dark, but just not as bright as I had expected. All in all, I am very pleased and would buy another without any reservation.
by: Troy07/05/2018
Well packaged.(bought brand "x" on another site first,arrived broken).Easy installation.Works great.I highly recommend this product.Makes hooking and unhooking much easier.I have bought several products from e.trailer,never disappointed.
Troy
7/8/2019
I have used it a lot. Has never missed a beat.
by: Carl m07/28/2017
Easy took about 15 mins to install and test . kind of slow but will work fine like it came with a crank in case battery is dead .was shipped very fast
by: Cole05/27/2015
Item is well packaged from factory for shipping. Received item quickly from warehouse. Time to install from opening package to lifting the camper was 8 minutes 30 seconds. It took 3 minutes to look at the fuzzy diagram on where the star nuts go when putting the three bolts back into the frame. Be sure to have a 10-12 gauge butt connector or something equal to your application, as no electrical connections are supplies. All in all, I would buy this again and will recommend this to others who might need to have an electrical jack replaced.
by: Georgia06/20/2019
Put it on my trailer last year, used it twice camping last year and went out for the first time this year and it doesn't work!! Had to use the hand crank!!
Mike L.
6/21/2019
The first step in troubleshooting is to check that the jack is receiving power from the trailer mounted battery, and to check the power connections and the battery ground to the trailer. Youll also want to make sure that the spot where the jack bolts to the trailer tongue isnt corroded, as corrosion will interfere with a good ground connection. The jack is covered by a 2 year warranty, so if the items I mentioned above check out okay, please contact our Customer Service folks at 800-298-8924.
by: bob06/09/2016
AWESOME PRODUCT WORKS WELL LIFTS MY TRAILER FOR HOOK UP AND DISCONNECT WITH EASE
Bob
6/9/2017
AWESOME
by: Cecilia04/08/2018
Love our jack! Lifting out trailer just got so much easier! Now if only the jack removed grease from the hitch ball!
by: Ronald 09/28/2018
The installation was easy and the new jack works very well. Better than the original.
The only problem - No wire connectors or fuse in the package. Had to buy some at local hardware.
Enjoyed the fast shipment.
Will be using this week on a fall trip to Vermont
by: Jc08/25/2017
Customer service is class A, quick delivery, and Installation was easy peazee. Took all of 15 minutes. Reused the bolts from the my old hand crank jack, had to crimp on a battery loop type connector , wire came striped an with a fuse connected. So, after a quick crimp I connected it to the positive lead and let it jack up an down. Now, I've read that the jack is slow, well so am I. I'm a 66 years young female, in no rush, and it's way better that me doing the hand crank dance.
by: Brian08/08/2017
Originally purchased a different model, E-trailer emailed me to let me know that the model I ordered was backordered for over a month. I contacted E-trailer by phone and was help by Troy H. Troy help me find a replacement model that would fit my needs and was in stock for immediate shipping. My shipment arrived 3 days after ordering, I replaced it that evening and it works great. Troy was a great help and E-trailer has shown they are a customer service driven company, THANKS!
by: Luke07/26/2018
The jack works great, easy install. Free shipping was nice too...
Luke
7/26/2019
Great
25
608
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Replacement Jack Recommendation to Replace a Lippert 1300 Powered JackThe Lippert 1300 jack is a now discontinued jack that is very similar to the Electric A-Frame Tongue Jack # JET-3555 which does not have any internal replaceable parts. The only solution you have would be to replace your current jack with something like the part # JET-3555.
view full answer... - Electric A-Frame Tongue Jack # JET-3500 Recommendation for a 2013 Jayco CamperThe Electric A-Frame Tongue Jack # JET-3555 that you referenced has a 3,500 lb lifting capacity. That would be more than enough capacity to lift the tongue weight of your 2013 Jayco Camper that weighs a total of 3,500 lbs. The tongue weight on your camper is probably around 350 lbs. I attached a review video for you to check out as well.
view full answer... - Does the Electric A-Frame Tongue Jack # JET-3500 Have to Face ForwardYes, you can install the Electric A-Frame Tongue Jack # JET-3555 that you referenced with the switch side facing any direction. Having the switches be facing backwards or to the side would allow more tail gate clearance.
view full answer... - Powered Jack Recommendation for a Diamon Cargo TrailerAs long as your Diamond cargo trailer has an A-frame and an A-frame jack mounting hole the Stromberg Carlson jack part # JET-3555 would fit and work well. This jack has a lifting capacity of 3,500 lbs which would be more than enough for your trailer. I attached a review video for you to check out as well.
view full answer... - Can the Stromberg Carlson Electric Jack Part # JET-3555 be Ran to the Vehicle's Battery The length of wire needed to attach the Stromberg Carlson Electric Trailer Jack part # JET-3555 to your vehicle's battery is more than likely causing a substantial loss in power which is why the jack will not work. I recommend installing a 12 volt auxiliary battery on the trailer and use that to power the jack. You can then use the 12 volt power on the trailer connector (7-way only) to provide a maintenance charge for the battery used for the jack. I have attached a review video for you.
view full answer... - Where Is Fuse On Stromberg Carlson Camper Jack # JET-3555The Stromberg Carlson Camper Jack, part # JET-3555 has a 30-amp inline fuse on the red 10 gauge wire that is attached to your 12V power source. I have attached a link to a product review video that shows the wire with the inline fuse.
view full answer... - What Is The Motor Measurements On The Stromberg Carlson Electric Trailer Jack # JET-3555When it comes to installing The Stromberg Carlson Electric Trailer Jack # JET-3555 per the manufacturer The motor unit is 4-1/2 inches by 3 inches. When it comes to the orientation of the jack you will have to turn the whole jack and not just the head of the jack. In doing you may need to make new holes which is fine but would need to sand them down for metal to metal contact. The housing on the jack is made out of a vacuum-formed plastic that will protect it from the elements. I attached...
view full answer...
- Electric Tongue Jack For 2017 Casita Spirit Deluxe Travel TrailerShort answer is Yes. The Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White # JET-3555 has the strength to work on your 2017 Casita Spirit TT. It will mount to an A-Frame you just need to make sure you have the space to mount it. It is a bolt on design with mounting holes that fit 3 inch spacing. You will need to drill holes in the A-Frame however to match the holes in the jack. The outer tube is 2-3/16 inches wide. So if you have a gap that it...
view full answer... - Do All A-Frame Trailers have Same 3 Bolt Pattern for Trailer JacksYes, basically all A-frame trailers are going to have the same bolt pattern for installing a trailer jack. Typically the jacks have mounting holes that are somewhat slotted too to help with some variances. The bolt pattern you mentioned having on your trailer is compatible with the Stromberg Carlson Electric Trailer Jack # JET-3555 so this will work great for you.
view full answer... - Can the Powered A-Frame Jack JET-3555 Be Powered by Parallel Trailer BatteriesYour batteries are run in parallel and the Powered A-Frame Jack part # JET-3555 can be wired to them and still allow you to take advantage of the extended battery life of having batteries set up like this. You would just need to run the power wire of the # JET-3555 to the main output power wire of your paralleled battery and since this jack grounds through the mounting hardware you would be good to go once installed.
view full answer... - Will the Stromberg Carlson Electric Jack Replace a Jack that has a Triangle Mount Flange Yes, the Stromberg Carlson Electric Jack, # JET-3555, will fit on your trailer's A-frame jack mounting hole. A-Frame jacks are all the same size and have the same bolt-pattern. The manufacturers did this so they could simplify the manufacturing process for both bolt-on and weld-on A-frame jacks. The mounting bolt holes on the Stromberg Carlson jack measure 3 inches from center to center.
view full answer... - Troubleshooting Strornberg Carlson Powered Jack Not Working with Parallel Trailer BatteriesThe issue you are having is most likely ground related, but what you can do is run a wire from the mounting bracket of the # JET-3555 to the main negative post of your two batteries ran in parallel. As long as your battery ends up delivering 12 volts to the trailer accessories the jack would work just fine. Because of that the issue is has to be a ground. You might check the condition of the fuse in the yellow fuse holder as well.
view full answer...
- Stromberg Carlson Trailer Jack # JET-3500 Recommendation To Help Install Spring BarsYes, this Electric A-Frame Tongue Jack # JET-3555 that you referenced would be adequate to lift your trailer and truck enough to install the spring (sway) bars of your weight distribution system. Usually when we recommend a jack for a trailer we say that as long as the jack is rated to lift half of the weight of the trailer it will work well. However, since you will be lifting the rear of your truck also you would need a little extra capacity, so the 3,500 lb capacity of the # JET-3500...
view full answer... - Troubleshooting A-Frame Jack That Has Limited Travel With Electric But Works ManuallyYou said you are able to raise or lower the # JET-3555 with the hand crank so that rules out the gears or the motor being seized. My contact at Stromberg-Carlson told me they think there may be an intermittent problem with the wiring like a ground. Check the ground connection and make sure it is attached securely to a clean bare metal surface and also check for any damaged wire. You can also pull the cover off the jack and inspect the wiring and any other parts to see if you can find...
view full answer... - Total Height of the Stromberg Carlson Trailer Jack JET-3500 When Extended Bracket to FootThe lifting height the # JET-3555 is capable of is 18 inches. When the jack is fully retracted it is 10-3/8 from jack foot to bottom of mounting bracket. So when it is fully extended it would be 28-3/8 inches from the jack foot to the bottom of the mounting bracket. Since you need 26 inches this would work well.
view full answer... - Troubleshooting a Electric Jack that will Extend but not RetractIt sounds like the switch in the jack is bad and should be replaced. Typically when an electric jack will go one direction but not the other its because the switch is broken. You might try checking all the fuses on the jack also. Since your trailer is brand new I would imagine there is some kind of warranty that would cover your jack. I would try contacting where you bought the trailer.
view full answer... - Is There A Difference In Power Between Two 6v Batteries Versus One 12v Battery When Powering A JackIt won't make a difference versus a single 12v battery but you will need to have your 6v batteries will need to be wired in series to get the voltage up to 12v to power the Stromberg Carlson Electric Trailer Jack # JET-3555. The only difference you may see is in how many times the battery can power the lift depending on the amp hour rating between the different batteries. Wired in series the voltage increases but the amp hour rating will remain the same. Wired in parallel the voltage...
view full answer... - Why Would a Powered Trailer Jack Only Work When Connected to Tow VehicleThe Electric A-Frame Tongue Jack # JET-3555 grounds through the mounting bracket of the jack. If your trailer isn't hooked up to your tow vehicle when you are trying to use the jack the problem would be that it isn't grounding properly. If you run the ground of your trailer battery to the trailer frame it should work.
view full answer... - What Electric Trailer Jack Has Shorted Retracted HeightThe electric jack we have that has the lowest retracted height is the Stromberg Carlson part # JET-3555 which has that dimension at 8-1/2 inches. Everything else is going to be 9 inches or more.
view full answer... - Troubleshooting New Trailer Jack That Doesn't Operate but the Lights Work FineIf you are able to operate the lights on your electric trailer jack, like the Stromberg Carlson # JET-3555, but not the jack itself then you either have a battery that isn't fully charged or the jack itself doesn't have a good ground. The lights on a jack don't draw much power but the operation of the jack does. Check either the ground wire or your mounting hardware (however your jack grounds) to make sure that your jack has a good, solid, clean connection. If it does then you will need...
view full answer... - Can an A-Frame Jack be Rotated on the Trailer for Hatch ClearanceYou can rotate an A-frame jack like the Stomberg Carlson Jack part # JET-3555 that you referenced if needed to allow you to open your rear hatch. The bolt pattern of the jack is allows for mounting of the jack in any orientation.
view full answer... - What Do the Two Switches on the Electric A-Frame Tongue Jack # JET-3500 ControlThere are two switches on the Electric A-Frame Tongue Jack # JET-3555 that you referenced. One is for the light and one is for raising and lowering the jack. Check out the review video I attached as well.
view full answer...
- How to Wire the Stromberg Carlson Electric A-Frame Trailer Tongue Jack, # JET-3555The Electric A-Frame Tongue Jack, # JET-3555, runs off a 12 volt battery. The best source for power would be from a 12 volt battery (like a car battery) mounted on the trailer. If you have a separate battery mounted on the trailer, a 7-Way trailer connectors 12 volt circuit can be used to maintain (but not up charge) that battery.
view full answer... - Troubleshooting Electric Trailer Jack that Doesnt work When Not Connected to a Tow VehicleThe problem is most likely the ground circuit for the jack. Since most trailers ground to the tow vehicle it sounds like the jack isn't able to ground properly when you are trying to power it with just your trailer. The jack grounds through it's mounting hardware to the trailer frame. If the trailer isn't grounding to a vehicle like when it is connected to your vehicle it won't work.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Jacob T
Installed by:
Cole B
Video by:
Chris R
Updated by:
Shelly K
Updated by:
Samantha S
Updated by:
Mike S
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bob
11/19/2023
Worked well all season. The jack is covered while in storage. No issues using it after its been in storage. I have a solar battery tender so theres plenty of power to get it out of storage.